|
|
Roller Curvature and Straightening Precision on Six and Two-Roller Tube Straightener |
LIU Zhi-liang1,XUE Yan-jie1,WANG Ying-jie2 |
1. College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China 2. Technique Center, Baoshan Iron and Steel Co., Ltd., Shanghai 210900, China |
|
|
Abstract In order to improve the straightening quality of pipe straightening machine, based on mechanics of materials and metal elastic-plastic theory, the straightening process of ordinary six-roller straightening machine and two-roller straightener was investigated, and both the advantages and the shortcomings of pipe precision straightening was proposed. A new type of composite pipe straightening machine, six and two pipe straightening machine was presented. A roller-shaped curve and its roll graph were analyzed through Matlab, and theoretical ideal roller curve straightening accuracy was also calculated. Finite element model of the 6+2 pipe straightening machine was built using the finite element software Marc, and the entire straightening process was simulated. On basis of theoretical analysis and numerical calculation, a certain original curvature of the pipe after the straightening of straightness and roundness was analyzed to prove a leveler straightening ability. A new straightening machine was present to improve the quality of pipe straightening.
|
Received: 26 June 2012
Published: 21 March 2013
|
|
|
|
|
[1] |
参考文献
|
[1] |
参考文献
|
[2] |
崔甫.矫直原理与矫直机械[M].北京:冶金工业出版社,2002.233-309
|
[2] |
崔甫.矫直原理与矫直机械[M].北京:冶金工业出版社,2002.233-309
|
[3] |
崔甫.矫直理论与参数计算[M].北京:机械工业出版社,1994:98-106
|
[3] |
崔甫.矫直理论与参数计算[M].北京:机械工业出版社,1994:98-106
|
[4] |
郑小海,王孟德.920mm十辊管材矫直机的研制[J].钢管,2011,40(1):29-31
|
[4] |
郑小海,王孟德.920mm十辊管材矫直机的研制[J].钢管,2011,40(1):29-31
|
[5] |
Min.nullJ.H.Analytical model for prediction of deformed shape in three-roll rolling process[J]..Journal of Materials Processing Technology,v 140,n 1-3 SPEC.,Sep,2003,22:-
|
[5] |
Min.nullJ.H.Analytical model for prediction of deformed shape in three-roll rolling process[J]..Journal of Materials Processing Technology,v 140,n 1-3 SPEC.,Sep,2003,22:-
|
[6] |
胡高举,郑才刚.斜辊矫直机辊型曲线的一种新算法[J].重型机械,2002,(6):22-24
|
[6] |
胡高举,郑才刚.斜辊矫直机辊型曲线的一种新算法[J].重型机械,2002,(6):22-24
|
[7] |
黄晓娟,黄晓云.矫直机矫直辊设计分析[J].沈阳工业学院学报,2001,(6):9-12
|
[7] |
黄晓娟,黄晓云.矫直机矫直辊设计分析[J].沈阳工业学院学报,2001,(6):9-12
|
[8] |
杜晓钟,孙斌煜.共轭旋转曲面法求解线棒材矫直辊型曲线[J].太原重型机械学院学报,2004,(04):25-26
|
[8] |
杜晓钟,孙斌煜.共轭旋转曲面法求解线棒材矫直辊型曲线[J].太原重型机械学院学报,2004,(04):25-26
|
[9] |
M.马斯基列逊.M.马斯基列逊. 管材矫直机[M].北京:机械工业出版社,1979:235-278
|
[9] |
M.马斯基列逊.M.马斯基列逊. 管材矫直机[M].北京:机械工业出版社,1979:235-278
|
[10] |
陈火红,杨剑.Marc新编有限元实例教程[M].北京:机械工业出版社,2006:243
|
[10] |
陈火红,杨剑.Marc新编有限元实例教程[M].北京:机械工业出版社,2006:243
|
[1] |
ZHANG Zi- qian,YANG Hui- lin. Setting and realizing process plan for straightening thin- walled tube by multiple cross rolls of equal curvature[J]. , 2018, 30(8): 625-632. |
[2] |
DU Feng-shan,FENG Yan-feng,LIU Wen-wen,SUN Jing-na,WANG Hai-jun. Measuring technique for roll profile electromagnetic control in precision plate rolling[J]. Iron and Steel, 2017, 52(11): 75-80. |
[3] |
ZHANG Long,WANG Dong-cheng,,MA Xiao-bao,WANG Zhi-jie,ZHANG Shuai. Improvement measures of roll’s curve grinding precision for cold strip mill[J]. Iron and Steel, 2016, 51(12): 47-52. |
[4] |
LIU Bao-ping,XUE Yan-jie,LIU Zhi-liang. Simulation and parameter calculation of 6+2 steel tube straightener[J]. Chinese Journal of Iron and Steel, 2015, 27(2): 31-36. |
[5] |
LIU Zhi-liang, ZHANG Li-pu, LIU Cai-yi, WANG Ying-jie. Analysis of Flattening Amount of Two-Roller Straightener for Small Section Tubes[J]. Iron and Steel, 2014, 49(8): 54-58. |
[6] |
ZHANG Zi-qian, YAN Yun-hui, YANG Hui-lin, WANG Lei. Limit Bending-Radius Model of Tensile Instability for Continuous Straightening a Thin-Walled Tube[J]. Iron and Steel, 2014, 49(6): 53-58. |
|
|
|
|