|
|
Influencing Factors of Blast Temperature |
CHEN Chuan1,CHENG Shu-sen1,GUO Xi-bin2 |
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, China 2. Xuanhua Iron and Steel Group Co., Ltd., Xuanhua 075100, Hebei, China |
|
|
Abstract Two-dimensional mathematical model of checker chamber was developed. Comparison between the calculated results and actual measured data in Xuansteel was done in order to verify the availability and accuracy of the mathematical model. The influence of checker brick design, dome temperature, mixed air operature and operating period on blast temperature was studied. The results show that: for each diameter of checker brick, there should be an optimal relative open area. Blast temperature can be enhanced by optimizing the correspondence between diameter and relative open area. When the preheating temperature of gas and air increase 100℃, the dome temperature and blast temperature will increase 80℃ and 72℃, respectively. Shortening operation period can significantly improve the blast temperature. It should choose reasonable operation period according the combustion burner ability in order to guarantee the gas and air mixing and burning efficiently.
|
Received: 28 August 2012
Published: 18 April 2013
|
|
|
|
[4] |
林成城,徐宏辉.热风炉高风温新技术开发[J].钢铁,2005,11(40):9-
|
[1] |
刘全兴.我国高炉热风炉的新技术应用回顾与展望[J].炼铁,2007,26(2):56-59
|
[5] |
金岩,陈巍,刘权兴.高炉煤气和助燃空气“双预热”提高高炉风温的研究[J].钢铁,1998,6(33):54-56
|
[2] |
钱世崇,张福明等.大型高炉热风炉技术的比较分析[J].钢铁,2011,46(10):1-
|
[3] |
成兰伯.高炉炼铁工艺计算.北京:冶金工业出版社
|
[6] |
郭敏雷,程树森.热风炉送风期格子砖温度分布计算[J].钢铁,2008,43(6):16-
|
[4] |
林成城,徐宏辉.热风炉高风温新技术开发[J].钢铁,2005,11(40):9-
|
[5] |
金岩,陈巍,刘权兴.高炉煤气和助燃空气“双预热”提高高炉风温的研究[J].钢铁,1998,6(33):54-56
|
[6] |
郭敏雷,程树森.热风炉送风期格子砖温度分布计算[J].钢铁,2008,43(6):16-
|
[7] |
Willmott A J,Hinchcliffe C.The effect of gas heat storage upon the performance of the thermal regenerator[J].Int.J.Heat mass transfer,1976,19(8):821-
|
[7] |
Willmott A J,Hinchcliffe C.The effect of gas heat storage upon the performance of the thermal regenerator[J].Int.J.Heat mass transfer,1976,19(8):821-
|
[8] |
Muske K R,Howse J W,Hansen G A,et al.Hot blast stove process model and model-based controller[J].Journal of iron and steel institute,1999,76(6):56-
|
[8] |
Muske K R,Howse J W,Hansen G A,et al.Hot blast stove process model and model-based controller[J].Journal of iron and steel institute,1999,76(6):56-
|
[9] |
杨世铭,陶文铨..传热学(第四版).[J].高等教育出版社,2009,:-
|
[10] |
《炼铁设计参考资料》编写组..炼铁设计参考资料.[J].冶金工业出版社,,1975,:-
|
[11] |
项钟庸,郭庆弟..蓄热式热风炉[J].冶金工业出版社,1988,:-
|
[9] |
杨世铭,陶文铨..传热学(第四版).[J].高等教育出版社,2009,:-
|
[12] |
项钟庸.再论提高热风温度的途径[J].钢铁,1998,33(10):13-15
|
[13] |
吴启常,沈明,陈秀娟.高风温热风炉设计理念的调整及相关问题讨论[J].炼铁,2008,27(4):11-12
|
[10] |
《炼铁设计参考资料》编写组..炼铁设计参考资料.[J].冶金工业出版社,,1975,:-
|
[11] |
项钟庸,郭庆弟..蓄热式热风炉[J].冶金工业出版社,1988,:-
|
[14] |
刘伟民.天钢2000m3高炉外燃式热风炉配双预热系统的使用效果[J].天津冶金,2007,5:7-8
|
[15] |
秦伟,陶新娅.热风炉高风温操作影响因素分析[J].鞍钢技术,2009,(2):36-37
|
[12] |
项钟庸.再论提高热风温度的途径[J].钢铁,1998,33(10):13-15
|
[13] |
吴启常,沈明,陈秀娟.高风温热风炉设计理念的调整及相关问题讨论[J].炼铁,2008,27(4):11-12
|
[14] |
刘伟民.天钢2000m3高炉外燃式热风炉配双预热系统的使用效果[J].天津冶金,2007,5:7-8
|
[15] |
秦伟,陶新娅.热风炉高风温操作影响因素分析[J].鞍钢技术,2009,(2):36-37
|
[1] |
GAO Peng,ZHAO Dan-ning,WANG Ping,LI Hua-jun,YU Chang-you,WEI Ru-fei. Study and application on combustibility of pulverized coal injection at 4 000 m3 BF of Masteel[J]. Iron and Steel, 2018, 53(12): 10-17. |
[2] |
YANG Fan,YAN Tie-jun,DING Ying,WU Mu-zhi. Discussion on checker brick deformation and jam of regenerator of 7.63 m coke oven and its replacement in WISCO[J]. Iron and Steel, 2016, 51(6): 94-98. |
[3] |
ZHANG Fu-ming1,HU Zu-rui1,CHENG Shu-sen2. High Temperature Air Combustion of Dome Combustion Hot Blast Stove[J]. Iron and Steel, 2012, 47(8): 74-80. |
[4] |
MA Jinfang,WAN Lei,JIA Guoli,LU fei,WANG feng. Technology of High Blast Air Temperature for No.2 BF in Shougang Qian’an Iron and Steel Co., Ltd. [J]. Iron and Steel, 2011, 46(6): 26-31. |
[5] |
CHEN Guanjun1,ZHANG Jianliang2,MA Jinfang3,JIA Junmin3,CHEN Shanshan2. Study on High Blast Temperature of Blast Furnace[J]. Chinese Journal of Iron and Steel, 2011, 23(05): 15-19. |
[6] |
ZHOU Hui-min1,ZHANG Hao2,CANG Da-qiang3,BAI Hao3,ZHANG Hai-tao4. Numerical Simulation of High Radiation Coating on Heat Transfer Process in Regenerator of Hot Blast Stove[J]. Chinese Journal of Iron and Steel, 2011, 23(03): 6-10. |
|
|
|
|