|
|
|
| Design of Concave Roller Shape for Two-Roll Straightener |
| WANG Yun1,LIU Cai1,MA Li-dong2,WANG Yu-feng3,HUANG Qing-xue2 |
1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China
2. Heavy Machinery Engineering Research Center of the Ministry of Education， Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China
3. New No.1 Rolling Mill of Shijiazhuang Iron and Steel Co., Ltd., Shijiazhuang 050031, Hebei, China |
|
|
|
|
Abstract The rollers of two-roll straightener in a rolling mill were needed to be imported and very expensive. Based on the study for the change law of residual curvature and roller shape calculation method, and combined with the finite element computing for straightening process, degree of plastic deformation and straightness of bar were analyzed. Then bending curvature was corrected and the corresponding roller shape was computed. At the same time the corresponding finite element model was computed until straightness of bar met the requirement. So the reasonable bending curvature was chosen and then the concave roller shape was obtained. The roller shape was contrasted with real roller and the shapes were basically identical.
|
|
Received: 14 September 2012
Published: 18 April 2013
|
|
|
|
|
|
| [1] |
LI Guang-hui. EVC-Plus technique of transverse thickness deviation control of non-oriented silicon steel during cold rolling[J]. Iron and Steel, 2018, 53(8): 68-72. |
| [2] |
YANG Guang-hui，ZHANG Gao-shang，ZHANG Jie，LI Hong-bo，LU Jian-yong. SMS-EDC edge control characteristics of 2 180 mm super-wide 6-high CVC cold rolling mill[J]. Iron and Steel, 2018, 53(5): 52-61. |
| [3] |
HE Xiao-li，LIU Ju-shuang. Roll end forced-contract problems and roll profile technology in sheets rolling process[J]. Iron and Steel, 2018, 53(1): 94-100. |
| [4] |
CHEN Jian，HUANG Tao，LI You-rong，XIONG Yong. Analysis of contact pressure between rolls during intermediate roll shifting in 6-high cold rolling mills[J]. Iron and Steel, 2017, 52(1): 43-46. |
| [5] |
YU Wei,XIONG Jia-ze,LEI Li-qi,WANG Zhu-sheng. Core rod deformation principle of rolled coaxial composite bar[J]. Chinese Journal of Iron and Steel, 2016, 28(8): 33-38. |
| [6] |
SHANG Fei，LI Hong-bo，ZHANG Jie，HU Chao，ZHANG Chao，CHEN Jian-fei. Asymmetric wear and wear prediction model of CVC work roll[J]. Iron and Steel, 2016, 51(6): 59-64. |
|
|
|
|
2013, Vol. 48 
