|
|
Delta-Ferrite in the Novel High Silicon Ferritic/Martensitic Steels |
ZHOU Min1,2,ZHOU Qiang-guo2,YAN Wei2,WANG Wei2,FAN Xin-min1,SHAN Yi-yin2 |
1. School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China 2. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, Liaoning, China |
|
|
Abstract The microstructures of novel high silicon ferritic/martensitic steels were studied by optical microscope, scanning electron microscope and transmission electron microscope, also the mechanical properties were investigated. It is found that the addition of silicon in the steel can increase the fraction of the delta-ferrite. However, the delta-ferrite will be eliminated by increasing the carbon content to 0.25%. Delta-ferrite will reduce the strength but not decrease the toughness. Meanwhile, the matrix continuity is interrupted by the stripe-like delta-ferrite distributed along the rolling direction, which makes the fractographies of impact specimens show lamination characteristic.
|
Received: 06 August 2012
Published: 28 May 2013
|
|
|
|
[1] |
S.I. Porollo, A.M. Dvoriashin, Yu. V. Konobeev, F.A. Garner. Microstructure and mechanical properties of ferritic/martensitic steel EP-823 after neutron irradiation to high doses in BOR-60. Journal of Nuclear Materials[J], 329-333(2004):314.
|
[1] |
S.I. Porollo, A.M. Dvoriashin, Yu. V. Konobeev, F.A. Garner. Microstructure and mechanical properties of ferritic/martensitic steel EP-823 after neutron irradiation to high doses in BOR-60. Journal of Nuclear Materials[J], 329-333(2004):314.
|
[2] |
A.F. Rowcliffe, J.P. Robertson, R.L. Klueh, K. Shiba , D.J. Alexander, M.L. Grossbeck , S. Jitsukawa. Fracture toughness and tensile behavior of ferritic-martensitic steels irradiated at low temperatures.258-263(1998):1275.
|
[3] |
胡小强,肖纳敏,罗兴宏,李殿中.含W型10%Cr超超临界钢中δ-铁素体的微观结构及其对力学性能的影响.金属学报[J].2009,45(5):553
|
[4] |
胡小强.9-12%Cr超超临界用钢的固态相变特征研究与应用[D]//沈阳:中国科学院金属研究所,2010.
|
[5] |
陈德和. 不锈钢的性能和组织. 北京:机械工业出版社[M],1977
|
[2] |
A.F. Rowcliffe, J.P. Robertson, R.L. Klueh, K. Shiba , D.J. Alexander, M.L. Grossbeck , S. Jitsukawa. Fracture toughness and tensile behavior of ferritic-martensitic steels irradiated at low temperatures.258-263(1998):1275.
|
[3] |
胡小强,肖纳敏,罗兴宏,李殿中.含W型10%Cr超超临界钢中δ-铁素体的微观结构及其对力学性能的影响.金属学报[J].2009,45(5):553
|
[4] |
胡小强.9-12%Cr超超临界用钢的固态相变特征研究与应用[D]//沈阳:中国科学院金属研究所,2010.
|
[5] |
陈德和. 不锈钢的性能和组织. 北京:机械工业出版社[M],1977
|
[6] |
P. Wang, S. P. Lu, N. M. Xiao, D. Z. Li, et al. Effect of Delta Ferrite on Impact Properties of Low Carbon 13Cr-4Ni Martensitic Stainless Steel. Materials Science and Engineering A[J], 2010,527(13-14): 3210.
|
[6] |
P. Wang, S. P. Lu, N. M. Xiao, D. Z. Li, et al. Effect of Delta Ferrite on Impact Properties of Low Carbon 13Cr-4Ni Martensitic Stainless Steel. Materials Science and Engineering A[J], 2010,527(13-14): 3210.
|
[7] |
Kentaro ASAKURA, Yosyun YAMASHITA, Takemi YAMADA, Koji SHIBATA. Effects of Ta and Nb on Microstructures Activation Ferritic 9cr-2W-0.2V Steel and Mechanical Properties of Low tor Fusion Reactor. ISIJ international[J]. 1990(11):937.
|
[7] |
Kentaro ASAKURA, Yosyun YAMASHITA, Takemi YAMADA, Koji SHIBATA. Effects of Ta and Nb on Microstructures Activation Ferritic 9cr-2W-0.2V Steel and Mechanical Properties of Low tor Fusion Reactor. ISIJ international[J]. 1990(11):937.
|
[8] |
马力深,钟约先,马庆贤,袁朝龙,董岚枫.δ铁素体对12%Cr超超临界转子钢冲击性能的影响. 清华大学学报:自然科学版. 2008, 48( 11):1887
|
[8] |
马力深,钟约先,马庆贤,袁朝龙,董岚枫.δ铁素体对12%Cr超超临界转子钢冲击性能的影响. 清华大学学报:自然科学版. 2008, 48( 11):1887
|
[9] |
WEI YAN, WEI SHA, LIN ZHU, WEI WANG, YI-YIN SHAN, and KE YANG. Delamination Fracture Related to Tempering in a High-Strength Low-Alloy Steel. METALLURGICAL AND MATERIALS TRANSACTIONS A[J].2010:159.
|
[9] |
WEI YAN, WEI SHA, LIN ZHU, WEI WANG, YI-YIN SHAN, and KE YANG. Delamination Fracture Related to Tempering in a High-Strength Low-Alloy Steel. METALLURGICAL AND MATERIALS TRANSACTIONS A[J].2010:159.
|
[10] |
邓丽芬,严伟,王威,单以银,杨柯. 新型形变诱发马氏体时效不锈钢的显微组织与力学性能研究. 材料热处理学报[J],2011,4(32):92.
|
[10] |
邓丽芬,严伟,王威,单以银,杨柯. 新型形变诱发马氏体时效不锈钢的显微组织与力学性能研究. 材料热处理学报[J],2011,4(32):92.
|
|
|
|