|
|
Behavior of TiN in the Electric Slag Remelting Process of Ni-22Cr-12Co Nickel-Based Superalloy |
MIAO Hua-jun,WANG Yan,ZENG Li,LI Yang |
State Key Laboratory of Advanced Stainless Steel, Taiyuan Iron and Steel Group Company Limited, Taiyuan 030003, Shanxi, China |
|
|
Abstract By metallographic analysis, scanning electron microscopy, energy spectrum analysis, combined with thermodynamic and kinetic calculation methods, the behavior of titanium-nitride in the electric slag remelting process of Ni-22Cr-12Co nickel-based superalloy were investigated. The results show that: under our experimental conditions, inclusions in the vacuum ingot and esr ingot is TiN which have the core of Al2O3; in the electric slag remelting process, the calculation time of dissolution of TiN is 1.17s; electric slag remelting process have little effect on the removal of the TiN inclusions, calculated TiN precipitated size of about 5μm, is slightly smaller than the experimental values.
|
Received: 09 November 2012
Published: 18 June 2013
|
|
|
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[4] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
[5] |
QIN Zheng-feng, XUE Zheng-liang, LI Jin-bo, LI Bo-si. Origin of large spherical or bar-shaped inclusions in calcium treated steel[J]. Iron and Steel, 2020, 55(5): 31-38. |
[6] |
WANG Yi, ZHANG Li-feng, REN Ying, REN Qiang. Mechanism of inclusion evolution during refining process of 37Mn5 steel production[J]. Iron and Steel, 2020, 55(5): 39-44. |
|
|
|
|