|
|
Non-Metallic Inclusion Control Technology for High Quality Cold Rolled Steel Sheets |
WANG Xin-hua |
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,Beijing 100083, China |
|
|
Abstract The non-metallic inclusions which can create surface defects of the cold rolled sheets mainly are the large sized Al2O3 clusters, “Ar+Al2O3” typed inclusions and the entrapped mold powder particles. Nowadays, under normal and stable casting conditions, the inclusions formed due to the mold powder entrapment can be well controlled. Among various types of unsteady cast slabs, the quality of the first slab of the cast is deteriorated most severely. In the bottom slab of the cast, inclusions from the mold powder entrapment are much more than the normal cast slabs. Also, the inclusions from mold powders are more in the slabs cast during heat/heat ladle exchange and during SEN quick change than the normal cast slabs. It is noted that, in Shougang Jingtang Iron and Steel Co., Ltd., the number density of the large inclusions decreases with increasing the casting speed when the casting speed is 1.0-2.0m/min. The harmful inclusions larger than 100μm were found mostly in 0-2mm sub-surface layers of the slabs. To produce surface defects free sheets for automotives, slab surface conditioning treatment should be adopted.
|
Received: 29 July 2013
Published: 16 September 2013
|
|
|
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[3] |
LAN Peng, TIE Zhan-peng, ZHANG Wei, MIAO Hong-sheng, YAN Qing-zhong, ZHANG Jia-quan. Research progress on spot segregation defects in continuously cast semi-products[J]. Iron and Steel, 2020, 55(2): 11-22. |
[4] |
GUO Yan-fei,CHEN Han,SUN Ke-qiang,LI Ju-qiang. Fracture analysis of 0Cr17Ni7Al spring wire winding spring[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(2): 28-. |
[5] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
[6] |
XIE shizheng. Effect of roller EMS on macrostructure and properties of high strength steel[J]. , 2020, 45(1): 0-0. |
|
|
|
|