|
|
Practice of Sulfur Content Control During the Smelting of Low Sulfur Pipeline Steel in Panzhihua Steel |
ZHANG Qiang,YUAN Hong-wei,YANG Shen-xiang,LI Qing-chun,CHEN Liang |
Pangang Group Panzhihua Steel Vanadium Co., Ltd., Extraction Vanadium and Steelmaking Plant,Panzhihua 617000, Sichuan, China |
|
|
Abstract The hot metal with 0.06%-0.12% of w([S]) was used for steelmaking at Pangang Extraction Vanadium and Steelmaking Plant. It’s difficult to product low sulfur steel. According with the practicing of the low sulfur steel of X52NS and L245NCS etc in Pangang, the sulfur content controlling technology was analyzed for the whole flow process including hot metal desulphurization pretreatment, converter ladle refining and continuous casting. Through controlling sulphur under 0.003% after the hot metal desulphurization pretreatment and using sulfur lower accessories slag in converter smelting station and molten steel LF station control [O] activity etc, Pangang Extraction Vanadium and Steelmaking Plant can produce the mass fraction of sulfur for 0.002% low sulfur steel.
|
Received: 27 December 2012
Published: 25 November 2013
|
|
|
|
[1] |
战东平, 姜周华, 王文忠, 等. 高洁净度管线钢中元素的作用与控制[J ] . 钢铁, 2001 , 36 (6) : 67.
|
[1] |
战东平, 姜周华, 王文忠, 等. 高洁净度管线钢中元素的作用与控制[J ] . 钢铁, 2001 , 36 (6) : 67.
|
[2] |
陈小平,等.攀钢含钒钛铁水预处理工艺实践.钢铁钒钛,2001,22(3):53-54.
|
[2] |
陈小平,等.攀钢含钒钛铁水预处理工艺实践.钢铁钒钛,2001,22(3):53-54.
|
[3] |
丁满堂,含钒钛铁水镁脱硫工艺研究. 第十四届全国炼钢学术会议文集,14-15
|
[3] |
丁满堂,含钒钛铁水镁脱硫工艺研究. 第十四届全国炼钢学术会议文集,14-15
|
[4] |
SOSINSKY DJ,KEMENY E I.Ladle slag control at rouge steel [J].Iron and Steel Maker,1992,9(7):25~28
|
[4] |
SOSINSKY DJ,KEMENY E I.Ladle slag control at rouge steel [J].Iron and Steel Maker,1992,9(7):25~28
|
[5] |
王新华,姜钧普,王福明.洁净钢—洁净钢生产工艺技术.北京:冶金工业出版社,2006.
|
[5] |
王新华,姜钧普,王福明.洁净钢—洁净钢生产工艺技术.北京:冶金工业出版社,2006.
|
[6] |
Coro Okuyama,Koji Yamaguchi,Syuji Takeuchi,et al.Effect of slag composition on the kinetics of formation of Al2O3-MgO inclusion in aluminum killed ferritic stainless Ssteel.ISIJ International,2000(2):121.
|
[6] |
Coro Okuyama,Koji Yamaguchi,Syuji Takeuchi,et al.Effect of slag composition on the kinetics of formation of Al2O3-MgO inclusion in aluminum killed ferritic stainless Ssteel.ISIJ International,2000(2):121.
|
[7] |
森一美,等.[J]铁と钢.1981,67:672。
|
[7] |
森一美,等.[J]铁と钢.1981,67:672。
|
[1] |
LI Lin, LI Ming-ming, LI Qiang, ZOU Zong-shu. Melt splashing behavior of steelmaking converter with nozzle-twisted lance[J]. Iron and Steel, 2020, 55(6): 54-60. |
[2] |
WANG Xinjiang. Technological progress of EAF steelmaking in China[J]. Iron and Steel, 2019, 54(8): 1-8. |
[3] |
ZHU Rong,WU Xuetao,WEI Guangsheng,TIAN Bohan. Development of green and intelligent technologies in electric #br#
arc furnace steelmaking processes[J]. Iron and Steel, 2019, 54(8): 9-20. |
[4] |
Lü Ming,PANG Zhuogang,LI Xiaoming,WANG Jianli. Impact characteristics of topblown gas jet in BOF[J]. Iron and Steel, 2019, 54(7): 35-41. |
[5] |
ZHANG Jian-jun1,2, MAO Xin-ping 2, WANG Chun-feng3, ZHU Wan-jun2. Development and expection on high-efficiency producing technology of steelmaking in TSCR line[J]. Iron and Steel, 2019, 54(5): 1-8. |
[6] |
LI Xiao-ming, WANG Jian-li, Lü Ming, YIN Wei-dong, CUI Ya-ru, ZHAO Jun-xue. Experiment on stainless steel pickling sludge used as steelmaking slagging flux[J]. Iron and Steel, 2019, 54(3): 96-101. |
|
|
|
|