|
|
Numerical Simulation of Temperature Distribution for Thin-Web Beam Blank Near Net-Shape Continuous Casting |
WANG Xiao-chen1,SUN Qi-song1,DI Quan-kang1,DING Ning1,CHENG Si-hua1,ZHOU Jian-bo2 |
(1.Shougang Research Institute of Technology, Beijing 100043, China 2. Steel Making Plant, Shougang Changzhi Iron and Steel Co., Ltd., Changzhi 046000, Shanxi, China) |
|
|
Abstract Thin-web beam blank embodied the near net-shape characteristic. Temperature distribution of thin-web beam blank continuous casting was calculated by finite element numerical simulation. The effect of casting speed and secondary cooling water ratio on temperature, solidified shell thickness and liquid core length was analyzed. The results are concluded as follows: when the web width is thinner, the thermal conductivity is lower, the shell thickness of web and fillet center is about 4mm thinner than flange tip’s; when casting speed made every increase of 0.1m/s, the surface temperature at the mold exit will increase 80-100℃ and the solidified shell thickness will be thinned 0.8-1.2mm and liquid core length will be reduce by 1.2-1.6m; when water ratio in secondary cooling made every increase of 0.05L/kg, the surface temperature at secondary cooling exit will reduce by 8-16℃ and liquid core length will reduce by 0.13m.
|
Received: 15 April 2013
Published: 13 December 2013
|
|
|
|
|
[1] |
张兴中. 近终形异形坯连铸技术[J]. 钢铁,1996,(12):72-75.
|
[1] |
张兴中. 近终形异形坯连铸技术[J]. 钢铁,1996,(12):72-75.
|
[2] |
卢盛意. 连铸异型坯的主要缺陷[J]. 连铸,2000,(1):38-40.
|
[2] |
卢盛意. 连铸异型坯的主要缺陷[J]. 连铸,2000,(1):38-40.
|
[3] |
茆勇,鲁怀敏,汪开忠. 近终形连铸异型坯的质量问题及对策[J]. 钢铁,2001,(6):21-23.
|
[3] |
茆勇,鲁怀敏,汪开忠. 近终形连铸异型坯的质量问题及对策[J]. 钢铁,2001,(6):21-23.
|
[4] |
Joong Kil Park, Brian G. Thomas, Indira V. Samarasekera,et al. Thermal and mechanical behavior of copper molds during thin-slab casting(I):plant trial and mathematical modeling[J]. Metallurgical and Materials Transactions B,2002,33(3):425-436.
|
[4] |
Joong Kil Park, Brian G. Thomas, Indira V. Samarasekera,et al. Thermal and mechanical behavior of copper molds during thin-slab casting(I):plant trial and mathematical modeling[J]. Metallurgical and Materials Transactions B,2002,33(3):425-436.
|
[5] |
杨建伟,杜艳平,史荣,等. 异形坯连铸过程流场与温度场耦合三维数值模拟[J]. 金属学报,2001,37(7):768-771.
|
[5] |
杨建伟,杜艳平,史荣,等. 异形坯连铸过程流场与温度场耦合三维数值模拟[J]. 金属学报,2001,37(7):768-771.
|
[6] |
Xu Hailun,Wen Guanghua,Sun Wei,et al. Analysis of thermal behavior for beam blank continuous casting mold[J]. Journal of Iron and Steel Research, International,2010,17(12):17-22.
|
[6] |
Xu Hailun,Wen Guanghua,Sun Wei,et al. Analysis of thermal behavior for beam blank continuous casting mold[J]. Journal of Iron and Steel Research, International,2010,17(12):17-22.
|
[7] |
罗伟,严波.异型坯连铸结晶器传热行为的数值模拟研究[J]. 钢铁,2011,46 (4): 31-35.
|
[7] |
罗伟,严波.异型坯连铸结晶器传热行为的数值模拟研究[J]. 钢铁,2011,46 (4): 31-35.
|
[8] |
干勇. 现代连续铸钢手册[M]. 北京:冶金工业出版社,2010.
|
[8] |
干勇. 现代连续铸钢手册[M]. 北京:冶金工业出版社,2010.
|
[1] |
SI-Jun LI du jinjinke. Numerical Simulation Study on Single-point Unequilibrium Casting for Beam Blank in Laiwu Iron and Steel Company[J]. , 2020, 45(3): 0-0. |
[2] |
chishirong chishirongchishirong. [J]. , 2020, 45(3): 0-0. |
[3] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
[4] |
Gan-Shui ZHOU. Diagnosis of instability during trial production of the billet continuous casting in a steel factory in Vietnam[J]. , 2020, 45(2): 0-0. |
[5] |
LAN Peng, TIE Zhan-peng, ZHANG Wei, MIAO Hong-sheng, YAN Qing-zhong, ZHANG Jia-quan. Research progress on spot segregation defects in continuously cast semi-products[J]. Iron and Steel, 2020, 55(2): 11-22. |
[6] |
ZHANG Si-yuan1,2,LONG Mu-jun1,2,AI Song-yuan1,2,TAN Kai1,2,CHEN Deng-fu1,2,HUANG Yun-wei1,2. Oxidation behavior of continuous casting slabs and its effect on temperature during cooling process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(2): 129-134. |
|
|
|
|