|
|
Numerical Simulation of Transient Fluid Flow During Casting Start Period in the CSP Funnel-Type Mold With Electromagnetic Brake |
XU Mian-guang1,LIU He-ping2,XIANG Li2,QIU Sheng-tao2 |
1. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China 2. National Engineering and Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract A three-dimensional mathematical model was established to investigate the transient flow phenomena of molten steel during the casting start period with electromagnetic brake (EMBr). An algorithm of VOF has been employed to simulate the air/steel interface. Use dynamic mesh to control the movement of dummy bar. The results show that, the electromagnetic field can significantly restrain the turbulent flow of molten steel and the fluctuation of the surface at the time of the dummy bar moving; the EMBr can optimize the flow pattern in the mold; the stabilization of the free surface may come earlier by 10 seconds with EMBr; the EMBr provides a positive effect to reduce the flow deviation of molten steel in the funnel-type mould.
|
Received: 29 January 2013
Published: 20 January 2014
|
|
|
|
|
[1] |
徐绵广, 刘和平, 仇圣桃. CSP连铸机漏斗形结晶器开浇过程中暂态流动现象的数值模拟[J]. 过程工程学报, 2012, 12 (6): 940-945.
|
[1] |
徐绵广, 刘和平, 仇圣桃. CSP连铸机漏斗形结晶器开浇过程中暂态流动现象的数值模拟[J]. 过程工程学报, 2012, 12 (6): 940-945.
|
[2] |
Wang Y F, Zhang L F. Transient Fluid Flow Phenomena during Continuous Casting: Part I. Cast Start[J]. ISIJ Int., 2010, 50 (12): 1777-1782.
|
[2] |
Wang Y F, Zhang L F. Transient Fluid Flow Phenomena during Continuous Casting: Part I. Cast Start[J]. ISIJ Int., 2010, 50 (12): 1777-1782.
|
[3] |
Kubo N, Ishii T, Kubota J, et al. Two-phase Flow Numerical Simulation of Molten Steel and Argon Gas in a Continuous Casting Mold[J]. ISIJ Int., 2002, 42 (11): 1251-1258.
|
[3] |
Kubo N, Ishii T, Kubota J, et al. Two-phase Flow Numerical Simulation of Molten Steel and Argon Gas in a Continuous Casting Mold[J]. ISIJ Int., 2002, 42 (11): 1251-1258.
|
[4] |
Zhang L F, Wang Y F, Zuo X J. Flow Transport and Inclusion Motion in Steel Continuous Casting Mold under Submerged Entry Nozzle Clogging Condition[J]. Metall. and Mater. Trans. B, 2008, 39 (8), 534-550.
|
[4] |
Zhang L F, Wang Y F, Zuo X J. Flow Transport and Inclusion Motion in Steel Continuous Casting Mold under Submerged Entry Nozzle Clogging Condition[J]. Metall. and Mater. Trans. B, 2008, 39 (8), 534-550.
|
[5] |
Thomas B G, Zhang L F. Mathematical Modeling of Fluid Flow in Continuous Casting[J]. ISIJ Int., 2001, 41 (10): 1181-1193.
|
[5] |
Thomas B G, Zhang L F. Mathematical Modeling of Fluid Flow in Continuous Casting[J]. ISIJ Int., 2001, 41 (10): 1181-1193.
|
[6] |
Nagai J, Suzuki K, Kojima S, et al. Steel Flow Control in a High Speed Continuous Slab Caster Using an Electromagnetic Brake[J]. Iron Steel Eng, 1984, 41 (5): 41-47.
|
[6] |
Nagai J, Suzuki K, Kojima S, et al. Steel Flow Control in a High Speed Continuous Slab Caster Using an Electromagnetic Brake[J]. Iron Steel Eng, 1984, 41 (5): 41-47.
|
[7] |
Wang Y F, Zhang L F. Steel quality improvement using EMBr at the continuous casting mold: Modeling and practice[C]. Proceedings of AISTech conference. St. Louis, 2009: 559-571.
|
[7] |
Wang Y F, Zhang L F. Steel quality improvement using EMBr at the continuous casting mold: Modeling and practice[C]. Proceedings of AISTech conference. St. Louis, 2009: 559-571.
|
[8] |
Li B W, Tsukihashi. Effect of Static Magnetic Field Application on the Mass Transfer in Sequence Slab Continuous Casting Process[J]. ISIJ Int., 2001, 41 (8): 844-850.
|
[8] |
Li B W, Tsukihashi. Effect of Static Magnetic Field Application on the Mass Transfer in Sequence Slab Continuous Casting Process[J]. ISIJ Int., 2001, 41 (8): 844-850.
|
[9] |
Cukierski K, Thomas B G. Flow Control with Local Electromagnetic Braking in Continuous Casting of Steel Slabs[J]. Metall. and Mater. Trans. B, 2008 (39), 94-107.
|
[9] |
Cukierski K, Thomas B G. Flow Control with Local Electromagnetic Braking in Continuous Casting of Steel Slabs[J]. Metall. and Mater. Trans. B, 2008 (39), 94-107.
|
[10] |
Wang Y F, Zhang L F. Fluid Flow-Related Transport Phenomena in Steel Slab Continuous Casting Strands under Electromagnetic Brake[J]. Metall. and Mater. Trans. B, 2011, 42 (12): 1319-1351.
|
[10] |
Wang Y F, Zhang L F. Fluid Flow-Related Transport Phenomena in Steel Slab Continuous Casting Strands under Electromagnetic Brake[J]. Metall. and Mater. Trans. B, 2011, 42 (12): 1319-1351.
|
[11] |
Wang Y F, Dong A P, Zhang L F. Effect of Slide Gate and EMBr on the Transport of Inclusions and Bubbles in Slab Continuous Casting Strands[J]. Steel Res. Int., 2011, 82 (4): 428-439.
|
[11] |
Wang Y F, Dong A P, Zhang L F. Effect of Slide Gate and EMBr on the Transport of Inclusions and Bubbles in Slab Continuous Casting Strands[J]. Steel Res. Int., 2011, 82 (4): 428-439.
|
[12] |
李宝宽, 赫冀成, 贾光霖, 等. 薄板坯连铸结晶器内钢液流场电磁制动的模拟研究[J]. 金属学报, 1997, 33 (11): 1207-1214.
|
[12] |
李宝宽, 赫冀成, 贾光霖, 等. 薄板坯连铸结晶器内钢液流场电磁制动的模拟研究[J]. 金属学报, 1997, 33 (11): 1207-1214.
|
[13] |
Li B K, Tsukihashi F. Effects of Electromagnetic Brake on Vortex Flows in Thin Slab Continuous Casting Mold[J]. ISIJ Int., 2006, 46 (12): 1833-1838.
|
[13] |
Li B K, Tsukihashi F. Effects of Electromagnetic Brake on Vortex Flows in Thin Slab Continuous Casting Mold[J]. ISIJ Int., 2006, 46 (12): 1833-1838.
|
[14] |
刘光穆, 石绍清, 邓康, 等. 电磁制动对CSP结晶器内夹杂物行为的影响[J]. 钢铁, 2007, 42 (7): 22-25.
|
[14] |
刘光穆, 石绍清, 邓康, 等. 电磁制动对CSP结晶器内夹杂物行为的影响[J]. 钢铁, 2007, 42 (7): 22-25.
|
[15] |
Tian X Y, Li B W, He J C. Electromagnetic Brake Effects on the Funnel Shape Mold of a Thin Slab Caster Based on a New Type Magnet[J]. Metall. and Mater. Trans. B, 2009, 40 (8), 596-604.
|
[15] |
Tian X Y, Li B W, He J C. Electromagnetic Brake Effects on the Funnel Shape Mold of a Thin Slab Caster Based on a New Type Magnet[J]. Metall. and Mater. Trans. B, 2009, 40 (8), 596-604.
|
[16] |
Liu H P, Yang C Z, Zhang H, et al. Numerical Simulation of Fluid Flow and Thermal Characteristics of Thin Slab in the Funnel-Type Molds of Two Casters[J]. ISIJ Int., 2011, 51 (3): 392-401.
|
[16] |
Liu H P, Yang C Z, Zhang H, et al. Numerical Simulation of Fluid Flow and Thermal Characteristics of Thin Slab in the Funnel-Type Molds of Two Casters[J]. ISIJ Int., 2011, 51 (3): 392-401.
|
[17] |
徐绵广, 刘和平, 仇圣桃, 等. 宽度对CSP漏斗形结晶器电磁制动效果影响的数值模拟[J]. 钢铁, 2013
|
[17] |
徐绵广, 刘和平, 仇圣桃, 等. 宽度对CSP漏斗形结晶器电磁制动效果影响的数值模拟[J]. 钢铁, 2013
|
[18] |
Hanao M, Kawamoto M, Yamanaka A. Growth of Solidified Shell Just below the Meniscus in Continuous Casting Mold[J]. ISIJ Int.., 2009, 49 (3): 365-374.
|
[18] |
Hanao M, Kawamoto M, Yamanaka A. Growth of Solidified Shell Just below the Meniscus in Continuous Casting Mold[J]. ISIJ Int.., 2009, 49 (3): 365-374.
|
[1] |
DAI Jing-xin1,DING Xue-yong1,XU Hai-fa2,LIU Cheng-hong1,JU Tian-hua1. Numerical simulation of conveying characteristics of dense phase pulverized coal in bend pipe[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 377-385. |
[2] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[3] |
Shuang-jiang Li. Numerical simulation of the effect of nozzle nodule on the behavior of molten steel in slab continuous casting mold[J]. , 2020, 45(3): 0-0. |
[4] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
[5] |
YANG Geng-wei1,HU Zhuo-li1,YIN Qi-long1,MAO Xin-ping1,2,MIAO Li-sha1,LIU Yang2. Effect of phase transformation time on microstructure and mechanical properties of hotrolled TRIP steel produced by CSP process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(2): 143-149. |
[6] |
CHEN Xu-ling, ZHENG Ru-yue, FAN Xiao-hui, GAN Min, HUANG Xiao-xian, JI Zhi-yun. Numerical simulation model of temperature and NOx emission in flue gas circulating sintering process[J]. Iron and Steel, 2020, 55(2): 23-30. |
|
|
|
|