|
|
|
| Mold Sticking and Its Propagation Behavior During Slab Continuous Casting |
| LIU Yu1,WANG Xu-dong1,2,SHI Gui-qian3,YAO Man1, ZHANG Xiao-bing2,WANG Xiong2 |
1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
2. Jiangsu Shagang Group, Zhangjiagang 215625, Jiangsu, China
3. WISDRI Engineering and Research Incorporation Limited, Wuhan 430223, Hubei, China |
|
|
|
|
Abstract Basing on the temperature measurement of a wide and thick slab continuous mold, the horizontal speed, vertical speed and propagation angle of the sticking were discussed. The effect of casting speed and slab dimensions on sticker’s propagation behavior was also analyzed. The results can be helpful to understand on propagation characteristic of sticking breakout, meanwhile, it can also provide basis for thermal couples layout optimization and the development of breakout prediction system.
|
|
Received: 13 May 2013
Published: 20 February 2014
|
|
|
|
| [1] |
钱振伦. 宽厚板连铸技术和宽厚板生产[J]. 中国钢铁业, 2010(7): 30.
|
| [1] |
钱振伦. 宽厚板连铸技术和宽厚板生产[J]. 中国钢铁业, 2010(7): 30.
|
| [2] |
屈天鹏, 韩志伟, 冯科, 等. 420mm特厚板坯连铸机生产实践[J]. 连铸, 2012(4) : 23.
|
| [2] |
屈天鹏, 韩志伟, 冯科, 等. 420mm特厚板坯连铸机生产实践[J]. 连铸, 2012(4) : 23.
|
| [3] |
秦旭, 朱超甫, 尹延荣, 等. 液压伺服振动式板坯连铸机的漏钢预报技术[J]. 钢铁, 2010, 45(11): 97.
|
| [3] |
秦旭, 朱超甫, 尹延荣, 等. 液压伺服振动式板坯连铸机的漏钢预报技术[J]. 钢铁, 2010, 45(11): 97.
|
| [4] |
Qin X, Zhu C F, Zeng L W, et al. Molten Steel Breakout Prediction Based on Thermal Friction Measurement[J]. Journal of Iron and Steel Research(International), 2011, 18(4) : 24.
|
| [4] |
Qin X, Zhu C F, Zeng L W, et al. Molten Steel Breakout Prediction Based on Thermal Friction Measurement[J]. Journal of Iron and Steel Research(International), 2011, 18(4) : 24.
|
| [5] |
Zhang B G, Li Q, Wang G, et al. Breakout Prediction Based on BP Neural Network of LM Algorithm in Continuous Casting Process[C]// International Conference on Measuring Technology and Mechatronics Automation, 2010: 765.
|
| [5] |
Zhang B G, Li Q, Wang G, et al. Breakout Prediction Based on BP Neural Network of LM Algorithm in Continuous Casting Process[C]// International Conference on Measuring Technology and Mechatronics Automation, 2010: 765.
|
| [6] |
刘永贞, 王旭东, 姚曼, 等. 结晶器内黏结漏钢及其传播行为的研究[J]. 炼钢, 2009, 25(3): 45.
|
| [6] |
刘永贞, 王旭东, 姚曼, 等. 结晶器内黏结漏钢及其传播行为的研究[J]. 炼钢, 2009, 25(3): 45.
|
| [7] |
常宏伟, 齐兵, 仉勇. 板坯漏钢预报系统在生产中的应用[J]. 鞍钢技术, 2007(1): 36.
|
| [7] |
常宏伟, 齐兵, 仉勇. 板坯漏钢预报系统在生产中的应用[J]. 鞍钢技术, 2007(1): 36.
|
| [1] |
SUN Deng-yue, HOU Hai-tao, RU Wen-di, XU Shi-min. Design of multi-point flexible pressure straightening device for wide and heavy plates and calculation of reverse bending amount[J]. Iron and Steel, 2020, 55(6): 113-117. |
| [2] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
| [3] |
. Formation reasons and control measures of abnormal oscillation marks for 10B21 cold-heading steel billets[J]. , 2020, 45(3): 0-0. |
| [4] |
zheng yuanshou. High speed production technology of 160 × 160mm2 continuous casting in SanGangsteel[J]. , 2020, 45(3): 0-0. |
| [5] |
suai. Reason and Control of Surface depression defect in Slab of Low-carbon Low-silicon Aluminum Killed Steel[J]. , 2020, 45(2): 0-0. |
| [6] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
|
|
|
|
2014, Vol. 49 
