|
|
Non-Metallic Inclusions in RH Refining Process |
ZHANG Zhong-zheng1,LIN Yang2,SHANG De-li3,L Chun-feng3,KANG Lei3,LIAO Xiang-wei3 |
(1.Product Manufacturing Department,Angang Steel Co., Ltd., Anshan 114021, Liaoning, China 2.Central Steelmaking Plant,Angang Steel Co., Ltd., Anshan 114021, Liaoning, China 3.Technical Center,Angang Steel Co., Ltd., Anshan 114009, Liaoning, China) |
|
|
Abstract A water model with linear scale 1∶5 for a 200t ladle RH unit was established.The effect of blow rate in up-gas tube in real process condition on slag entrapment was analyzed to get optimizing process parameters.The results show that with blow rate120m3/h in up-gas tube,slag entrapment occurs smoothly and evenly.According to the result of water model,the industrial tests on RH unit using premelted slag were carried out.After sampling in each process,the amount,size distribution and morphology of inclusions in non-oriented silicon steel with/without pre-molten refining slag treatment were studied by metalloscope,image analytical meter and scan electron microscope.The results show that pre-molten refining slag treatment makes the amount and size of inclusions decrease and Al2O3 change to CaO-MgO-A12O3 compound inclusions in RH metallurgical treatment.
|
Received: 23 May 2013
Published: 28 April 2014
|
|
|
|
[1] |
艾新港,包燕平,吴华杰,等. RH工艺生产轴承钢脱氧和去除夹杂物研究 [J]. 钢铁, 2009, 44(7): 43-46.
|
[1] |
艾新港,包燕平,吴华杰,等. RH工艺生产轴承钢脱氧和去除夹杂物研究 [J]. 钢铁, 2009, 44(7): 43-46.
|
[2] |
吴华杰, 包燕平, 岳峰, 等. RH真空处理GCr15 轴承钢中全氧及显微夹杂物的行为研究 [J]. 北京科技大学学报, 2009, 31(Suppl.1): 121-124.
|
[2] |
吴华杰, 包燕平, 岳峰, 等. RH真空处理GCr15 轴承钢中全氧及显微夹杂物的行为研究 [J]. 北京科技大学学报, 2009, 31(Suppl.1): 121-124.
|
[3] |
Tusset V, Marique C, Mathy H, et al. Cleanness Assessment of High Quality Steels Produced by RH Treatment [J]. Ironmaking Steelmaking, 2003, 30(2): 142-145.
|
[3] |
Tusset V, Marique C, Mathy H, et al. Cleanness Assessment of High Quality Steels Produced by RH Treatment [J]. Ironmaking Steelmaking, 2003, 30(2): 142-145.
|
[4] |
Shirabe K, Szekely J. A mathematical Model of Fluid Flow and Inclusion Coalescence in the RH Vacuum Degassing System [J]. Trans ISIJ, 1983, 23(6): 465-474.
|
[4] |
Shirabe K, Szekely J. A mathematical Model of Fluid Flow and Inclusion Coalescence in the RH Vacuum Degassing System [J]. Trans ISIJ, 1983, 23(6): 465-474.
|
[5] |
Miki Y, Thomas B G. Model of Inclusion Removal During RH Degassing of Steel [J]. Iron and Steelmaker, 1997, 24(8): 31-38.
|
[5] |
Miki Y, Thomas B G. Model of Inclusion Removal During RH Degassing of Steel [J]. Iron and Steelmaker, 1997, 24(8): 31-38.
|
[6] |
耿佃桥, 雷洪, 赫冀成. 不同工艺因素对RH精炼夹杂物去除过程的影响 [J]. 钢铁, 2009, 44(10): 26-30.
|
[6] |
耿佃桥, 雷洪, 赫冀成. 不同工艺因素对RH精炼夹杂物去除过程的影响 [J]. 钢铁, 2009, 44(10): 26-30.
|
[7] |
耿佃桥, 雷洪, 赫冀成. RH装置内夹杂物聚合与去除的三维数值模拟 [J]. 钢铁研究学报, 2009, 21(12): 10-13.
|
[7] |
耿佃桥, 雷洪, 赫冀成. RH装置内夹杂物聚合与去除的三维数值模拟 [J]. 钢铁研究学报, 2009, 21(12): 10-13.
|
[8] |
Treadgold C J. Behaviour of Inclusions in RH Vacuum Degasser [J]. Ironmaking and Steelmaking, 2003, 30(2): 120-124.
|
[8] |
Treadgold C J. Behaviour of Inclusions in RH Vacuum Degasser [J]. Ironmaking and Steelmaking, 2003, 30(2): 120-124.
|
[9] |
郭上型,王建军,周俐. RH用低氟型CaO+Al2O3基熔剂深脱硫工业试验[J]. 钢铁钒钛, 2009, 30(2): 47-49
|
[9] |
郭上型,王建军,周俐. RH用低氟型CaO+Al2O3基熔剂深脱硫工业试验[J]. 钢铁钒钛, 2009, 30(2): 47-49
|
[10] |
Sao Won-Gap, Han Woong-Hee, Kim Jeong-Sik, etal. Deoxidation Equilibria Among Mg, Al and O in Liquid Iron in the Presence of MgO·AI2O3 Spinal. ISIJ Internationa1,2003,43(2):201
|
[10] |
Sao Won-Gap, Han Woong-Hee, Kim Jeong-Sik, etal. Deoxidation Equilibria Among Mg, Al and O in Liquid Iron in the Presence of MgO·AI2O3 Spinal. ISIJ Internationa1,2003,43(2):201
|
[11] |
李海波, 林伟, 王新华. 铝脱氧钢中尖晶石夹杂物的生成与转变[J]. 特殊钢, 2007, 28(4): 30-32.
|
[11] |
李海波, 林伟, 王新华. 铝脱氧钢中尖晶石夹杂物的生成与转变[J]. 特殊钢, 2007, 28(4): 30-32.
|
[12] |
Okuyurna Goro, Yamaguchi Koji, Takeuchi Syuji, etal. Effect of Slag Composition on the Kinetics of Formation of A12O3-MgO Inclusions in Aluminum Killed Ferriitc Stainless Steel. ISIJ Intemational,2000,40 (2) :121
|
[12] |
Okuyurna Goro, Yamaguchi Koji, Takeuchi Syuji, etal. Effect of Slag Composition on the Kinetics of Formation of A12O3-MgO Inclusions in Aluminum Killed Ferriitc Stainless Steel. ISIJ Intemational,2000,40 (2) :121
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[3] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[4] |
CHU Yan-ping, CHEN Zhi-yong, LIU Nan, ZHANG Li-feng. Formation and control of spinel inclusions in high-speed heavy rail steel[J]. Iron and Steel, 2020, 55(1): 38-46. |
[5] |
LI Muming,YU Huixiang,PAN Ming,BAI Hao. Effect of refining slag on nonmetallic inclusions in #br# high manganese steel[J]. Iron and Steel, 2019, 54(6): 37-42. |
[6] |
ZHANG Qing-song, MIN Yi, XU Hai-sheng, XU Jiu-jian, LIU Cheng-jun. Effect of magnesium treatment on formation and evolution of inclusion in Si-Mn deoxidized steel[J]. Iron and Steel, 2019, 54(4): 37-42. |
|
|
|
|