|
|
Effect of Niobium on Surface Decarburization Sensitivity of 60Si2Mn Spring Steel |
ZHAO Dong-yu1,2,YONG Qi-long2,YANG Geng-wei1,2,3,SUN Xin-jun2,LI Zhao-dong2,ZHANG Zheng-yan2 |
(1. School of Materials Science and Engineering, Kunming University of Science and Technology,Kunming 650093, Yunnan, China 2. Department of Structural Steels, Central Iron and Steel Research Institute, Beijing 100081, China 3. School of Materials and Metallurgy,Wuhan University of Science and Technology, Wuhan 430081, Hubei, China) |
|
|
Abstract The decarburization layer of spring steels with different Nb contents were measured by metallographic microscopic method, the effect of niobium and its content on the surface decarburization sensitivity of 60Si2Mn spring steel was systematically investigated. The results show that niobium can effectively reduce the decarburization sensitivity of 60Si2Mn spring steel. However, the depth of the decarburization does not decrease with the niobium content further increases. The diffusion coefficients of carbon in austenite in different temperatures were calculated by means of Thermo-Calc DICTRA software in which the effects of niobium and other elements on diffusion of carbon in austenite were considered. And the variation of decarburizing depths of the experimental steels was calculated by the Fick’s second law. It agrees with the measured data and can be used to investigate the effects of other alloying elements on the decarburization more effectively.
|
Received: 02 November 2013
Published: 07 May 2014
|
|
|
|
[1] |
马鸣图, 李志刚, 卢向阳.钒对35SiMnB弹簧钢脱碳敏感性的影响[J].特殊钢, 2001, 22(5):9-11
|
[1] |
马鸣图, 李志刚, 卢向阳.钒对35SiMnB弹簧钢脱碳敏感性的影响[J].特殊钢, 2001, 22(5):9-11
|
[2] |
聂义宏, 付书红, 惠卫军, 等.硼对高强度弹簧钢脱碳敏感性的影响[J].钢铁研究学报, 2005, 17(4):45-50
|
[2] |
聂义宏, 付书红, 惠卫军, 等.硼对高强度弹簧钢脱碳敏感性的影响[J].钢铁研究学报, 2005, 17(4):45-50
|
[3] |
史显波, 赵连玉, 王威, 等.几种高速列车用弹簧钢的脱碳敏感性[J].材料热处理学报, 2013, 34(7):47-52
|
[3] |
史显波, 赵连玉, 王威, 等.几种高速列车用弹簧钢的脱碳敏感性[J].材料热处理学报, 2013, 34(7):47-52
|
[4] |
Li D, Anghelina D, Burzic D, et al.Investigation of Decarburization in Spring Steel Production Process–Part I: Experiments[J].steel research international, 2009, 80(4):298-303
|
[4] |
Li D, Anghelina D, Burzic D, et al.Investigation of Decarburization in Spring Steel Production Process–Part I: Experiments[J].steel research international, 2009, 80(4):298-303
|
[5] |
雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社, 2006.
|
[5] |
雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社, 2006.
|
[6] |
ZHANG C, LIU Y, ZHOU L, et al.Secondary Hardening,Austenite Grain Coarsening and Surface Decarburization Phenomenon in Nb-Bearing Spring Steel[J].Journal of Iron and Steel Research, International, 2012, 19(3):47-61
|
[6] |
ZHANG C, LIU Y, ZHOU L, et al.Secondary Hardening,Austenite Grain Coarsening and Surface Decarburization Phenomenon in Nb-Bearing Spring Steel[J].Journal of Iron and Steel Research, International, 2012, 19(3):47-61
|
[7] |
段正祥, 余际星, 吴昶, 等.利用菲克扩散定律计算脱碳层厚度[J].锻压装备与制造技术, 2008, 43(4):73-75
|
[7] |
段正祥, 余际星, 吴昶, 等.利用菲克扩散定律计算脱碳层厚度[J].锻压装备与制造技术, 2008, 43(4):73-75
|
[8] |
中国国家标准化管理委员会.GB-T244-2008.钢的脱碳层深度测定法【S】.2008
|
[8] |
中国国家标准化管理委员会.GB-T244-2008.钢的脱碳层深度测定法【S】.2008
|
[9] |
CEM.DIN ENISO 3887.Determination of depth of deearburization[S].2003
|
[9] |
CEM.DIN ENISO 3887.Determination of depth of deearburization[S].2003
|
[10] |
赵品, 谢辅洲, 孙振国.材料科学基础教程【M】.3版.哈尔滨:哈尔滨工业大学出版社,2009.
|
[10] |
赵品, 谢辅洲, 孙振国.材料科学基础教程【M】.3版.哈尔滨:哈尔滨工业大学出版社,2009.
|
[1] |
CAO Yan-guang, LI Zhao-dong, DING Can-can, ZHANG Jin-wen, YONG Qi-long, GAO Jian-bing. Effect of niobium addition on hardenability of high-speed railway axle steel[J]. Iron and Steel, 2020, 55(6): 107-112. |
[2] |
. Study on NbC Precipitate of Nb Microalloying Mid-carbon Steel[J]. , 2020, 45(3): 0-0. |
[3] |
CAO Jianchun,LIU Chenglin,GAO Peng,ZHOU Xiaolong,ZHOU Huang. Research status and development trend of #br# elemental segregation in steel[J]. Iron and Steel, 2019, 54(6): 11-19. |
[4] |
MENG Yao-qing,ZHAO Hao-qian,TENG Yan-feng,KONG Wei-tao,ZHENG Yong-rui. Influence of calcium treatment on oxide inclusions in Sikilled spring steel 55SiCr[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(6): 538-546. |
[5] |
JIN Yang-fan, ZANG Qi-yu, ZHANG Tuo, YANG Yi-tao. Reasonable proportioning relationship between Nb and C of Cr13 series casting martensitic stainless steel[J]. Iron and Steel, 2019, 54(3): 87-95. |
[6] |
XU Zhang-yin1,2, LI Bao-wei2, ZHAO Zeng-wu2. Oxidation of carbon and silicon in Nb-bearing hot metal[J]. Iron and Steel, 2019, 54(3): 42-46. |
|
|
|
|