|
|
End Heavy-Reduction Method for Plate Rolling Process |
HU Xian-lei1, ZENG Qing-liang1,2, DING Jing-guo1 |
1. State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110819, Liaoning, China 2. ?No.2?Rolling?Mill?Factory, Anyang?Iron?and?Steel?Group, Anyang?455004, Henan, China |
|
|
Abstract To enhance reduction in pass is of significance to improve performances of thick plates. By analyzing the change of torsion in each rolling pass, it is known that the peak torsion at biting-in phase of front end is the critical factor which limits the reduction in pass. Based on the change rules of rolling torque at steady phase of the whole rolling process, end heavy-reduction method was put forward, which means that the reduction in pass can be properly increased at the plate end for forward rolling pass to form wedge or ladder shape, then the reduction in pass of full-length can be increased at the subsequent inverse rolling pass because the front end of plate is thinner. The amplifying range of reduction in pass was determined by the relationship of rolling torsion to reduction in pass. The method can effectively increase the core deformability of thick plate without reforming the rolling equipments, so it is suitable for application in plate mill.
|
Received: 13 May 2014
Published: 02 December 2014
|
|
|
|
[1] |
陶魄. 中厚钢板轧机扭矩监测的应用研究[J]. 机械设计与制造工程, 2002,31(1):72-74.(Tao Po. The inspection of the torsion in rolling mill sued for normal and thick plates[J]. Mechanical Design and Making Engineering, 2002,31(1):72-74.).
|
[1] |
陶魄. 中厚钢板轧机扭矩监测的应用研究[J]. 机械设计与制造工程, 2002,31(1):72-74.(Tao Po. The inspection of the torsion in rolling mill sued for normal and thick plates[J]. Mechanical Design and Making Engineering, 2002,31(1):72-74.).
|
[2] |
胡贤磊. 中厚板轧机过程模型的研究[D]. 沈阳:东北大学,2003.(Hu Xian-lei. Process control models for plate mill[D]. Shenyang: Northeastern University,2003).
|
[2] |
胡贤磊. 中厚板轧机过程模型的研究[D]. 沈阳:东北大学,2003.(Hu Xian-lei. Process control models for plate mill[D]. Shenyang: Northeastern University,2003).
|
[3] |
Saito Y, Enami T, Tanaka T. Mathematical model of hot deformation resisitance with reference to microstructural changes during rolling in plate mill[J]. Transactions ISIJ.1985,25(11):1146-1155.
|
[3] |
Saito Y, Enami T, Tanaka T. Mathematical model of hot deformation resisitance with reference to microstructural changes during rolling in plate mill[J]. Transactions ISIJ.1985,25(11):1146-1155.
|
[4] |
孙一康. 带钢热连轧数学模型基础[M]. 北京: 冶金工业出版社, 1979(Sun Yi-Kang. Mathematic models of computer control for strip hot tandem mill[M]. Beijing: Metallurgy Industry Press, 1979. ).
|
[4] |
孙一康. 带钢热连轧数学模型基础[M]. 北京: 冶金工业出版社, 1979(Sun Yi-Kang. Mathematic models of computer control for strip hot tandem mill[M]. Beijing: Metallurgy Industry Press, 1979. ).
|
[5] |
Moon C H.; Lee Y. Approximate model for predicting roll force and torque in plate rolling with peening effect considered [J]. ISIJ International,2008,48(10):1409-1418.
|
[5] |
Moon C H.; Lee Y. Approximate model for predicting roll force and torque in plate rolling with peening effect considered [J]. ISIJ International,2008,48(10):1409-1418.
|
[6] |
Bayoumi L S. A kinematic analytical approach to predict roll force, rolling torque and forward slip in thin hot strip continuous rolling [J]. Ironmaking and Steelmaking, 2007,34(5): 444-448.
|
[6] |
Bayoumi L S. A kinematic analytical approach to predict roll force, rolling torque and forward slip in thin hot strip continuous rolling [J]. Ironmaking and Steelmaking, 2007,34(5): 444-448.
|
[7] |
Lindgren M. Experimental investigations of the roll load and roll torque when high strength steel is roll formed [J]. Journal of Materials Processing Technology, 2007,191(3),:44-47.
|
[7] |
Lindgren M. Experimental investigations of the roll load and roll torque when high strength steel is roll formed [J]. Journal of Materials Processing Technology, 2007,191(3),:44-47.
|
[8] |
MacAlister A F. Modeling and adaptive techniques for rolling mill automation. Iron and Steel Engineering, 1989, 66(12): 38-46.
|
[8] |
MacAlister A F. Modeling and adaptive techniques for rolling mill automation. Iron and Steel Engineering, 1989, 66(12): 38-46.
|
[9] |
Dixit U S; Chandra S.. A neural network based methodology for the prediction of roll force and roll torque in fuzzy form for cold flat rolling process [J]. International Journal of Advanced Manufacturing Technology, 2003,22(11-12),883-889.
|
[9] |
Dixit U S; Chandra S.. A neural network based methodology for the prediction of roll force and roll torque in fuzzy form for cold flat rolling process [J]. International Journal of Advanced Manufacturing Technology, 2003,22(11-12),883-889.
|
[1] |
ZHENG Zhong, WANG Yong-zhou, LU Yi, GAO Xiao-qiang. Intelligent optimization model and system of plate and slab design of medium steel plate[J]. Iron and Steel, 2020, 55(4): 53-59. |
[2] |
WANG Guo-fu, YU Hai-feng. Discussion about on-line pickling technology of medium plate of special metal and alloy[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(1): 18-. |
[3] |
CUI Jin-xing1, HAN Shi-chao2, SUN Jian-liang1, PENG Yan1. Evolution characteristics of residual stresses in medium-thick plate during thinning process[J]. Iron and Steel, 2019, 54(5): 39-46. |
[4] |
JIAO Zhi-jie,HE Chun-yu,DING Jing-guo,WANG Jun,ZHANG Kuo-bin,WANG Li-xia. Industrial popularization and application of plan view pattern control technology for plate mill[J]. Iron and Steel, 2019, 54(1): 49-55. |
[5] |
LI Yu-jun,LI Liang,LAN Peng,ZHANG Jia-quan,CHEN Lie,KOU Yu-shan. Reduction amount model for dynamic soft reduction in bloom continuous casting of special steels[J]. , 2018, 43(4): 27-32. |
[6] |
WANG Guo-fu,ZHOU Qing-jun,JIANG Lu-bao. Discussion about the on-line pickling process of titanium and titanium alloy plate[J]. , 2017, 35(6): 47-53. |
|
|
|
|