|
|
Development and application about on-line monitoring system of hot metal drainage of blast furnace |
HUANG Pei-zheng,DONG Ya-feng,HOU Quan-shi,SHA Yong-zhi |
Ironmaking Technology and Enginerring Department, New Metallurgy Hi-tech Group Co., Ltd., Beijing 100081, China |
|
|
Abstract To achieve the detection of the hot metal and slag flow,three parameters must be detected which includes the metal flow velocity, the tap hole diameter and the mass increase rate of the hot metal ladle. According to physicochemical property of the high temperature liquid metal and slag, it is difficult to achieve accurate direct measurement. A non-contact measuring method for hot metal and slag flow is proposed after research and field trip. Based on the Doppler effect, the metal and slag drainage rate of Shougang Jingtang 5 500 m3 blast furnace was measured on-line,and at the same time video camera monitors the section of tapping hole, and the change of tap hole diameter was recorded and observed in real time. Combining the mass increase rate of hot metal in the weighing system of iron ladle, analyzing and calculating the metal and slag drainage rate and slag ratio of blast furnace, verifying the reliability of detection system in contrast with the actual theoretical value.
|
Received: 02 July 2014
Published: 28 April 2015
|
|
|
|
[1] |
王莜留.钢铁冶金学 (炼铁部分) [M].北京冶金工业出版社, 2009, :4-4
|
[1] |
王莜留.钢铁冶金学 (炼铁部分) [M].北京冶金工业出版社, 2009, :4-4
|
[2] |
那树人.炼铁计算辨析 [M].北京: 冶金工业出版社, 2010, :26-27
|
[2] |
那树人.炼铁计算辨析 [M].北京: 冶金工业出版社, 2010, :26-27
|
[3] |
Johnny Brannbacka, Henrik Saxen.Modeling the Liquid Levels in the Blast Furnace Hearth[J].ISIJ International, 2001, 41(10):1131-1138
|
[3] |
Johnny Brannbacka, Henrik Saxen.Modeling the Liquid Levels in the Blast Furnace Hearth[J].ISIJ International, 2001, 41(10):1131-1138
|
[4] |
冯诺.超声手册 [M].南京: 南京大学出版社, 1999, :-
|
[4] |
冯诺.超声手册 [M].南京: 南京大学出版社, 1999, :-
|
[5] |
Masakazu Iida, Kazuhiro Ogura, Tetsui Hakone.Analysis of drainage rate variation of molten iron and slag from blast furnace during tapping[J].ISIJ international, 2008, 48(4):412-419
|
[5] |
Masakazu Iida, Kazuhiro Ogura, Tetsui Hakone.Analysis of drainage rate variation of molten iron and slag from blast furnace during tapping[J].ISIJ international, 2008, 48(4):412-419
|
[6] |
周传典.高炉炼铁技术手册 [M].北京冶金工业出版社, 2005, :581-581
|
[6] |
周传典.高炉炼铁技术手册 [M].北京冶金工业出版社, 2005, :581-581
|
[1] |
. The realization of valve spool jamming online monitoring of the mould width adjustment reversing valve[J]. , 2020, 45(3): 0-0. |
[2] |
LIU Jie,ZHAO Dong-ming,LI Jian-jun,ZHOU Ming-shun,ZHANG Hui,XU Li-bing. Research and application of blast furnace’s low[w(MgO)]slag in Ansteel[J]. Iron and Steel, 2018, 53(3): 22-26. |
[3] |
CAO Ying-jie,ZHANG Jian-liang,,GUO Hong-wei,,DU Shen,BAI Jun-li. Clustering Analysis and Application of Operative Profile in Guofeng No.1 Blast Furnace Based on the Algorithm of TwoStep[J]. Iron and Steel, 2013, 48(10): 17-22. |
[4] |
. On-line Monitoring System for Temperature Field and Abnormal Erosion of BF Hearth and Bottom[J]. Iron and Steel, 2010, 45(5): 11-11. |
[5] |
WU Lijun;XU Xun;ZHOU Weiguo. Study on Intelligent Monitoring Methodology for Blast Furnace Stave[J]. Iron and Steel, 2008, 43(1): 13-0. |
|
|
|
|