|
|
|
| High-efficiency software and its application for shape analysis and presetting of cold rolling strip |
| WANG Dong-cheng1,2，ZHAO Zhang-xian1，LIU Hong-min1,2 |
1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip， Yanshan University，Qinhuangdao 066004， Hebei， China
2. State Key Laboratory of Metastable Materials Science and Technology， Yanshan University， Qinhuangdao 066004， Hebei， China |
|
|
|
|
Abstract In view of the low calculation speed and poor stability of theory models for shape analysis， high-efficiency shape prediction model and high-efficiency shape presetting model are presented. Based on the high-efficiency models，a set of high-efficiency software is developed for shape analysis and presetting. The software is universal for different four-high and six-high cold rolling mill，and its main feature is the significant high speed and high stability without sacrificing calculation precision. Through two examples，the software is proved to be reliable，and the calculation time of shape analysis and presetting for common cold tandem mill with five stands is less than 1 s. The software can be used to in the fields of mill design，mill selection and optimization roll contour，and its core code can be used to preset the shape on-line directly.
|
|
Received: 23 September 2014
Published: 06 July 2015
|
|
|
|
|
|
| [1] |
解相朋. 中冶南方基于工控机的冷轧带钢板形控制技术[N]. 世界金属导报, 2014-3-4(B16).
|
| [1] |
解相朋. 中冶南方基于工控机的冷轧带钢板形控制技术[N]. 世界金属导报, 2014-3-4(B16).
|
| [2] |
中国金属学会, 中国钢铁工业协会. 2011~2020年中国钢铁工业科学与技术发展指南[M]. 冶金工业出版社, 2012:1-10.
|
| [2] |
中国金属学会, 中国钢铁工业协会. 2011~2020年中国钢铁工业科学与技术发展指南[M]. 冶金工业出版社, 2012:1-10.
|
| [3] |
曹建国, 毛娜, 张杰, 等. 冷连轧机边降控制窜辊数学模型研究[J]. 钢铁, 2008,43(8):57-60.
|
| [3] |
曹建国, 毛娜, 张杰, 等. 冷连轧机边降控制窜辊数学模型研究[J]. 钢铁, 2008,43(8):57-60.
|
| [4] |
吴彬, 张清东, 张晓峰. 冷连轧机辊型配置对高强钢板形控制的影响[J]. 轧钢, 2012,29(1):19-21
|
| [4] |
吴彬, 张清东, 张晓峰. 冷连轧机辊型配置对高强钢板形控制的影响[J]. 轧钢, 2012,29(1):19-21
|
| [5] |
刘宏民. 三维轧制理论及其应用[M]. 北京: 科学出版社, 1999: 129.
|
| [5] |
刘宏民. 三维轧制理论及其应用[M]. 北京: 科学出版社, 1999: 129.
|
| [6] |
白振华, 连家创, 刘峰. 宝钢2050热轧厂平整机辊型优化技术的研究[J]. 钢铁, 2002,37(9):35-38.
|
| [6] |
白振华, 连家创, 刘峰. 宝钢2050热轧厂平整机辊型优化技术的研究[J]. 钢铁, 2002,37(9):35-38.
|
| [7] |
朱简如, 林秀贞, 吴平, 等. 宽带UCMW冷连轧机辊系与轧件一体化仿真模型的开发[J]. 冶金设备, 2005,8 (4): 7-10.
|
| [7] |
朱简如, 林秀贞, 吴平, 等. 宽带UCMW冷连轧机辊系与轧件一体化仿真模型的开发[J]. 冶金设备, 2005,8 (4): 7-10.
|
| [8] |
杨轶婷, 张清东, 王文广, 等. 带钢冷连轧轧件辊系一体化仿真研究[J]. 轧钢, 2007,24 (5): 13-16.
|
| [8] |
杨轶婷, 张清东, 王文广, 等. 带钢冷连轧轧件辊系一体化仿真研究[J]. 轧钢, 2007,24 (5): 13-16.
|
| [9] |
梁治国, 王晓晨. 我国钛合金板带产业现状及生产技术研究热点分析[J]. 新材料产业, 2012,3: 13-16.
|
| [9] |
梁治国, 王晓晨. 我国钛合金板带产业现状及生产技术研究热点分析[J]. 新材料产业, 2012,3: 13-16.
|
| [10] |
Wang Dong-cheng, Liu Hong-min. A Model Coupling Method for Shape Prediction[J]. Journal of Iron and Steel Research, International, 2012,19(2): 22-27.
|
| [10] |
Wang Dong-cheng, Liu Hong-min. A Model Coupling Method for Shape Prediction[J]. Journal of Iron and Steel Research, International, 2012,19(2): 22-27.
|
| [11] |
彭艳, 刘宏民, 胡建平. 冷轧带材板形分析及预设定控制软件(FAPCSR)及其应用[J]. 钢铁, 2003,38 (2): 34-37.
|
| [11] |
彭艳, 刘宏民, 胡建平. 冷轧带材板形分析及预设定控制软件(FAPCSR)及其应用[J]. 钢铁, 2003,38 (2): 34-37.
|
| [12] |
彭艳, 刘宏民, 胡建平. 冷轧带钢板形控制仿真分析软件(FCEACSR) [J]. 冶金设备, 2003,3: 13-16.
|
| [12] |
彭艳, 刘宏民, 胡建平. 冷轧带钢板形控制仿真分析软件(FCEACSR) [J]. 冶金设备, 2003,3: 13-16.
|
| [13] |
T. Tarnoplskaya, F. R. De Hoog. An Efficient Method for Strip Flatness Analysis in Cold Rolling[J]. Math. Engng. Ind. , 1998, 7(1): 71?95.
|
| [13] |
T. Tarnoplskaya, F. R. De Hoog. An Efficient Method for Strip Flatness Analysis in Cold Rolling[J]. Math. Engng. Ind. , 1998, 7(1): 71?95.
|
| [14] |
王东城. 基于机理的板形在线设定模型研究[D]. 秦皇岛：燕山大学，2009.
|
| [14] |
王东城. 基于机理的板形在线设定模型研究[D]. 秦皇岛：燕山大学，2009.
|
| [15] |
白振华, 康晓鹏, 吴首民. 双UCM平整机组板形参数在线设定技术[J]. 钢铁, 2009,44(5): 39-43.
|
| [15] |
白振华, 康晓鹏, 吴首民. 双UCM平整机组板形参数在线设定技术[J]. 钢铁, 2009,44(5): 39-43.
|
| [1] |
ZHENG Zhong, WANG Yong-zhou, LU Yi, GAO Xiao-qiang. Intelligent optimization model and system of plate and slab design of medium steel plate[J]. Iron and Steel, 2020, 55(4): 53-59. |
| [2] |
TANG Wei, DU Feng-shan, LIN Hai-hai, WEN Jie. Control technology of cold rolled high-strength container plate′s rolling stability[J]. Iron and Steel, 2020, 55(1): 65-71. |
| [3] |
YU Huaxin,WANG Dongcheng,LIU Hongmin,ZHANG Shuai,YANG Lipo. Electric drive scheme design of flatness meter for cold rolling strip[J]. Iron and Steel, 2019, 54(7): 56-60. |
| [4] |
ZHANG Dian- hua,SUN Jie,CHEN Shu- zong,LI Xu. Intelligent optimization control of tandem cold rolling process for high precision thin strip[J]. , 2019, 31(2): 180-189. |
| [5] |
BAI Zhen-hua, XU Peng, WANG Xiao-lei, HE Zhao-long, WANG Yun-xiang. Development of comprehensive optimum setting technology for roll profile curve of continuous annealing unit[J]. Iron and Steel, 2019, 54(12): 48-54. |
| [6] |
YU Huaxin1，WANG Dongcheng1，2，LIU Hongmin1，2，XU Yanghuan1，GUO Zijian3. Channel coupling and decoupling of seamless flatness #br# meter for cold rolling strip[J]. Iron and Steel, 2019, 54(11): 63-68. |
|
|
|
|
2015, Vol. 50 
