中国超超临界电站锅炉关键材料用钢及合金的研究现状

doi:10. 13228/j. boyuan. issn0449- 749x. 20140685

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract The present research in China of martensitic heat- resistant steel，austenitic heat- resistant steel and nickel base heat- resistant alloy used for boiler and ultra- supercritical thermal power unit was summarized. Compared with nickel base heat- resistant alloy，the research for martensitic and austenite heat resistant steels is relatively sufficient. The nationalization of martensitic heat- resistant T/P91，T/P92 steel and austenitic heat resistant steel S31042，S30432 and TP347HFG has been realized. Studies on the new 9%Cr martensitic steel were carried out. The investment and research for nickel base alloys is not enough and the research content is far from systematic，but the trend of study on nickel base alloys shows good momentum. Relatively comprehensive studies on Inconel 740，Alloy 617 and Alloy 263 have being researched by domestic scholars. Some recommendations were put forward for the research of key materials for ultra- supercritical thermal power units. Better future in China of research for heat resistant steels and alloys was prospected.

Received: 20 November 2014 Published: 18 August 2015

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YU Jing-Zhong
	LIU Zheng-Dong
	FU Han-Sheng

Cite this article:

YU Jing-Zhong,LIU Zheng-Dong,FU Han-Sheng. Study of steel and alloys for ultra- supercritical power plant in China[J]. Iron and Steel, 2015, 50(8): 1-9.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10. 13228/j. boyuan. issn0449- 749x. 20140685 OR http://www.chinamet.cn/Jweb_gt/EN/Y2015/V50/I8/1

[1]	http://www.chinairn.com/print/3409987.html(中研网)
[1]	http://www.chinairn.com/print/3409987.html(中研网)
[2]	金艳鸣. 我国各省电力工业碳排放现状与趋势分析. 能源技术经济. 2011，23(10):56-60
[2]	金艳鸣. 我国各省电力工业碳排放现状与趋势分析. 能源技术经济. 2011，23(10):56-60
[3]	黄瓯，彭泽瑛. 7000(2高超超临界技术的经济得益分析. 热力透平. 2010,39(3):170-174,220
[3]	黄瓯，彭泽瑛. 7000(2高超超临界技术的经济得益分析. 热力透平. 2010,39(3):170-174,220
[4]	王起江，洪杰. 超超临界电站锅炉用新型管材的研制. 宝钢技术. 2008年第5期：44-48,53
[4]	王起江，洪杰. 超超临界电站锅炉用新型管材的研制. 宝钢技术. 2008年第5期：44-48,53
[5]	石如星. 超超临界火电机组用P92钢组织性能优化研究. 钢铁研究总院，2011年博士学位论文.
[5]	石如星. 超超临界火电机组用P92钢组织性能优化研究. 钢铁研究总院，2011年博士学位论文.
[6]	姜运建. P92钢焊接残余应力场及对高温寿命的影响研究. 天津大学，2011年博士学位论文.
[6]	姜运建. P92钢焊接残余应力场及对高温寿命的影响研究. 天津大学，2011年博士学位论文.
[7]	包汉生. T122马氏体耐热钢组织稳定性与性能的研究. 钢铁研究总院，2009年博士学位论文.
[7]	包汉生. T122马氏体耐热钢组织稳定性与性能的研究. 钢铁研究总院，2009年博士学位论文.
[8]	J. Hald. Microstructure and long-term creep properties of 9–12% Cr steels. International Journal of Pressure Vessels and Piping 85 (2008) 30–37
[8]	J. Hald. Microstructure and long-term creep properties of 9–12% Cr steels. International Journal of Pressure Vessels and Piping 85 (2008) 30–37
[9]	Abe F. Bainitic and martensitic creep-resistant steels. Cur Solid State Mater Sci 2004; 8:305–11
[9]	Abe F. Bainitic and martensitic creep-resistant steels. Cur Solid State Mater Sci 2004; 8:305–11
[10]	Miro R. Susta, Khoo BOO Seong. Supercritical and Ultra-Supercritical Power Plants-SEA’s Vision or Reality? Power-GEN Asia 2004.
[10]	Miro R. Susta, Khoo BOO Seong. Supercritical and Ultra-Supercritical Power Plants-SEA’s Vision or Reality? Power-GEN Asia 2004.
[11]	Y. Sawaragi, H. Teranishi, H. Makiura, etal. The development of ... for boiler tubes (in Japanese). Sumitomo Met., 1985,37: 166.
[11]	Y. Sawaragi, H. Teranishi, H. Makiura, etal. The development of ... for boiler tubes (in Japanese). Sumitomo Met., 1985,37: 166.
[12]	M. Kikuchi, M. Sakakibara, Y. Otoguro, etal. Fujita: Int. Conf. High Temperature Alloys, Petten, Netherlands, 1985.
[12]	M. Kikuchi, M. Sakakibara, Y. Otoguro, etal. Fujita: Int. Conf. High Temperature Alloys, Petten, Netherlands, 1985.
[13]	A. Toyama, Y. Minami, T. Yamada. Effect of alloying elements on high temperature properties in an austenitic stainless steel containing high Cr (in Japanese) CAMP-ISIJ, 1988,1: 928～932
[13]	A. Toyama, Y. Minami, T. Yamada. Effect of alloying elements on high temperature properties in an austenitic stainless steel containing high Cr (in Japanese) CAMP-ISIJ, 1988,1: 928～932
[14]	H. Senba, M. Igarashi, Y. Sawaragi. Proc. Int. Conf. Power Engineering–’ 97, JSME, Tokyo. 1997, 2: 125～130.
[14]	H. Senba, M. Igarashi, Y. Sawaragi. Proc. Int. Conf. Power Engineering–’ 97, JSME, Tokyo. 1997, 2: 125～130.
[15]	M. Tamura, N. Yamanouchi, M. Tanimura, etal. 1985 Expo. and Symp. Industrial Heat Exchanger Tech., Pittsburgh PA, 1985.
[15]	M. Tamura, N. Yamanouchi, M. Tanimura, etal. 1985 Expo. and Symp. Industrial Heat Exchanger Tech., Pittsburgh PA, 1985.
[16]	Y. Sawaragi, K. Yoshikawa: Tetsu-to-Hagané, 1986, 72: S672.
[16]	Y. Sawaragi, K. Yoshikawa: Tetsu-to-Hagané, 1986, 72: S672.
[17]	Fujimitsu MASUYAMA. History of Power Plants and Progress in Heat Resistant Steels. ISIJ International, Vol. 41 (2001), No. 6, pp. 612–625
[17]	Fujimitsu MASUYAMA. History of Power Plants and Progress in Heat Resistant Steels. ISIJ International, Vol. 41 (2001), No. 6, pp. 612–625
[18]	杨岩. 铜含量对Super304H钢性能影响的研究. 2001年，钢铁研究硕士论文.
[18]	杨岩. 铜含量对Super304H钢性能影响的研究. 2001年，钢铁研究硕士论文.
[19]	谭舒平. S30432锅炉钢的工艺与高温强化机理研究. 2009年，哈尔滨工业大学博士学位论文。
[19]	谭舒平. S30432锅炉钢的工艺与高温强化机理研究. 2009年，哈尔滨工业大学博士学位论文。
[20]	赵庆权. 国产化Super304H钢管组织性能及持久强度研究. 2008年，兰州理工大学硕士论文。
[20]	赵庆权. 国产化Super304H钢管组织性能及持久强度研究. 2008年，兰州理工大学硕士论文。
[21]	杜婷. 时效和蠕变对预变形SUPER3o4H奥氏体不锈钢析出行为和晶间腐蚀性能的影响. 2009年，西安理工大学硕士论文.
[21]	杜婷. 时效和蠕变对预变形SUPER3o4H奥氏体不锈钢析出行为和晶间腐蚀性能的影响. 2009年，西安理工大学硕士论文.
[22]	范杰. 锅炉用S30432（10Cr18Ni9NbCu3BN）奥氏体耐热不锈钢管试制工艺研究. 2009年，重庆大学硕士论文.
[22]	范杰. 锅炉用S30432（10Cr18Ni9NbCu3BN）奥氏体耐热不锈钢管试制工艺研究. 2009年，重庆大学硕士论文.
[23]	王敬忠. 奥氏体耐热钢S31042钢组织与性能研究. 2011年，钢铁研究总院博士学位论文.
[23]	王敬忠. 奥氏体耐热钢S31042钢组织与性能研究. 2011年，钢铁研究总院博士学位论文.
[24]	吕一楠，刘树涛，张红军. HR3C钢内压蠕变试验后显微组织与力学性能试验研究. 动力工程学报. 2013年33卷第10期:822-828.
[24]	吕一楠，刘树涛，张红军. HR3C钢内压蠕变试验后显微组织与力学性能试验研究. 动力工程学报. 2013年33卷第10期:822-828.
[25]	R. Blum, R. W. Vanstone, Materials for Advanced Power Engineering 2006, Proceedings of the 8th Liege Conference, 2006, 41～60
[25]	R. Blum, R. W. Vanstone, Materials for Advanced Power Engineering 2006, Proceedings of the 8th Liege Conference, 2006, 41～60
[26]	R. Viswanathan, R. Purgert. Proceedings of 8th International Conference on Creep and Fatigue at Elevated Temperatures, July 22-26, 2007, CREEP2007-26826
[26]	R. Viswanathan, R. Purgert. Proceedings of 8th International Conference on Creep and Fatigue at Elevated Temperatures, July 22-26, 2007, CREEP2007-26826
[27]	我国启动国家700℃超超临界燃煤发电技术创新联盟[EB/OL]/[2010-07-26]．http：//news. xinlmanet. com/fortone/2010-07/23/c_12367331.htm.
[28]	A developmental precipitation-hardenable Ni-Cr-Co superalloy for high temperature service in the automotive and power industries [EB/OL]/[2010-07-16]. http://www. Specialmetals. Com/docuamm/Inconel%20alloy%20740.pdf.
[27]	我国启动国家700℃超超临界燃煤发电技术创新联盟[EB/OL]/[2010-07-26]．http：//news. xinlmanet. com/fortone/2010-07/23/c_12367331.htm.
[28]	A developmental precipitation-hardenable Ni-Cr-Co superalloy for high temperature service in the automotive and power industries [EB/OL]/[2010-07-16]. http://www. Specialmetals. Com/docuamm/Inconel%20alloy%20740.pdf.
[29]	张红军，周荣灿，侯淑芳等. 先进超超临界机组用Inconel 740合金的组织稳定性研究. 中国电机工程学报. 2011年，第31卷第8期：108-113
[29]	张红军，周荣灿，侯淑芳等. 先进超超临界机组用Inconel 740合金的组织稳定性研究. 中国电机工程学报. 2011年，第31卷第8期：108-113
[30]	谢锡善，赵双群，董建新，等. 超超临界电站用Inconel 740镍基合金的组织稳定性及其改型研究. 动力工程学报. 2011年，第31卷第8期：638-643
[30]	谢锡善，赵双群，董建新，等. 超超临界电站用Inconel 740镍基合金的组织稳定性及其改型研究. 动力工程学报. 2011年，第31卷第8期：638-643
[31]	Maile K．Use of advanced alloy 617 mod for critical components of tlle futLIre 700℃ coal fired power plant[C]//2009 Symposium on Advanced Power Plant Heat Resistant Steels and Alloys, Shanghai, China, 2009.
[31]	Maile K．Use of advanced alloy 617 mod for critical components of tlle futLIre 700℃ coal fired power plant[C]//2009 Symposium on Advanced Power Plant Heat Resistant Steels and Alloys, Shanghai, China, 2009.
[32]	Gariboldi E, Cabibbo M, Spigarelli S. Investigation on precipitation phenomena of Ni-22Cr-12Co-9Mo alloy aged and crept at high temperature. Intermatinal Journal of Pressure Vessels and Piping, 2008, 85(1/2):63-71.
[32]	Gariboldi E, Cabibbo M, Spigarelli S. Investigation on precipitation phenomena of Ni-22Cr-12Co-9Mo alloy aged and crept at high temperature. Intermatinal Journal of Pressure Vessels and Piping, 2008, 85(1/2):63-71.
[33]	Wu Q．Micmsnllctural characterization of advanced boiIer aterials for ultra upercritical coal power plant. Pmceedings to the Fourm Intemational Conference on Advances in Materials TecllIlology for Fossil PowerPlants,2005.
[33]	Wu Q．Micmsnllctural characterization of advanced boiIer aterials for ultra upercritical coal power plant. Pmceedings to the Fourm Intemational Conference on Advances in Materials TecllIlology for Fossil PowerPlants,2005.
[34]	郭岩，王博涵，侯淑芳，等. 700℃超超临界机组用AIIoy 617 mod时效析出相. 中国电机工程学报. 2014年，第34卷第14期：2314-2318
[34]	郭岩，王博涵，侯淑芳，等. 700℃超超临界机组用AIIoy 617 mod时效析出相. 中国电机工程学报. 2014年，第34卷第14期：2314-2318
[35]	吴赞，王珏，董建新，等. 超超临界电站用617合金的组织特征及平衡相析出规律. 稀有金属材料与工程. 2013年，第42卷第9期：1826-1831.
[35]	吴赞，王珏，董建新，等. 超超临界电站用617合金的组织特征及平衡相析出规律. 稀有金属材料与工程. 2013年，第42卷第9期：1826-1831.
[36]	IMAMURA Y, TODA K, YAMATOTO M. Numerical simulation of ice accretion on wind turbine blade[C].//Abstracts of the papers Presented at the minisymposia sessions of WCCM VI in Conjunction with APCOM. Beijing:[s.n.], 2004.
[36]	IMAMURA Y, TODA K, YAMATOTO M. Numerical simulation of ice accretion on wind turbine blade[C].//Abstracts of the papers Presented at the minisymposia sessions of WCCM VI in Conjunction with APCOM. Beijing:[s.n.], 2004.
[37]	张红军，周荣灿，侯淑芳. 先进超超临界机组用候选材料 Alloy263的组织稳定性. 动力工程学报. 2011年，第31卷第12期：969-973
[37]	张红军，周荣灿，侯淑芳. 先进超超临界机组用候选材料 Alloy263的组织稳定性. 动力工程学报. 2011年，第31卷第12期：969-973
[38]	叶建水，董建新，张麦仓，等. 700。C先进超超临界电站用617和740镍基合金焊接研究进展. 世界钢铁. 2013年第4期:63-72
[38]	叶建水，董建新，张麦仓，等. 700。C先进超超临界电站用617和740镍基合金焊接研究进展. 世界钢铁. 2013年第4期:63-72