|
|
Mechanical properties and quality control of railway axle steel produced by continuous casting |
DAI Hua-yun1,GUO Hua1,LI Hong-guang1,LIU Jian-hua2,CHEN Xiao-long 2 |
1. Pangang Group Research Institute Co., Ltd., Panzhihua 617000, Sichuan, China 2. Pangang Group Panzhihua Iron and Vanadium Co., Ltd., Panzhihua 617067, Sichuan, China |
|
|
Abstract The axle steel produced by continuous casting technology has some characteristics such as high efficiency,good economy and superior quality. In order to meet the requirements of high quality billets of axle steel by the ministry of railway,the production of axle steel for railway by bloom continuous casting technology was studied. According to the technical conditions of axle steels produced by continuous casting,the action effect of microelement vanadium in axle steel was investigated. The mechanical performance index of axle steel was significantly improved by the precipitation strengthening of vanadium. The strength stability increased by 10%. Moreover,the axle steel exhibited good plastic toughness. The mechanical property and the quality of manufactured axles were good,which could meet the technical conditions of continuous casting and the development demand of railroad transportation.
|
Received: 17 December 2014
Published: 08 September 2015
|
|
|
|
[1] |
王玉玲.LZ50车轴钢性能和组织的研究[J].山西冶金, 2012, 5(1):7-9
|
[1] |
王玉玲.LZ50车轴钢性能和组织的研究[J].山西冶金, 2012, 5(1):7-9
|
[2] |
孟传峰.铁路车轴用LZ50钢机械性能影响因素的分析研究[J].山西冶金, 2002, 2(2):20-21
|
[2] |
孟传峰.铁路车轴用LZ50钢机械性能影响因素的分析研究[J].山西冶金, 2002, 2(2):20-21
|
[3] |
孙涛、李英等.钒系微合金车轴钢晶粒粗化温度研究[J].热加工工艺, 2010, 39(24):67-72
|
[3] |
孙涛、李英等.钒系微合金车轴钢晶粒粗化温度研究[J].热加工工艺, 2010, 39(24):67-72
|
[1] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[2] |
LI Pei-jia1,XU Zhen-nan2,LIANG Chao2,ZHANG Ya-yan1,CHEN Xing-fu2,WU Jian-tao2. Study on investment casting process of K4002 cover plate based on laser sintering rapid molding technology[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 491-496. |
[3] |
QIN Da-wei, LIU Hong-min, ZHANG Dong, WANG Jun-sheng. Prediction models of coating mass per unit area for hot-dip galvanized strip based on artificial neural network[J]. Iron and Steel, 2020, 55(5): 68-72. |
[4] |
ZHAO Yun-peng, YU Chao, XIAO Hong, WU Zong-he, XU Peng-peng, XIE Hong-biao. Effect of pure iron interlayer on mechanical properties of hot rolled stainless steel clad plate[J]. Iron and Steel, 2020, 55(5): 73-79. |
[5] |
SHAO Cheng-wei, WANG Jun-tao, ZHAO Xiao-li, HUI Wei-jun. Microstructure and mechanical properties of intercritically annealed Al-contain medium Mn steel[J]. Iron and Steel, 2020, 55(5): 87-93. |
[6] |
GUO De-ying, LI Dong-tao, ZHANG Xiao-ming, MA Chao, DAI Xin, LIU Yang. Optical structure and thermal and cold properties of different rank coal coke[J]. Iron and Steel, 2020, 55(4): 20-26. |
|
|
|
|