|
|
Strategic study on green development of Chinese steel industry |
ZHANG Chun-xia1,WANG Hai-feng1,ZHANG Shou-rong2,YIN Rui-yu1 |
(1. State Key Laboratory of Advanced Steel Processes and Products,Central Iron and Steel Research Institute,Beijing 100081,China 2. Wuhan Iron and Steel Group Company, Wuhan 430080,Hubei,China) |
|
|
Abstract Issues of green development of Chinese steel industry are studied. The green development connotations of steel industry are put forward based on analysis of the concept and the relationships among green development, recycling development and low-carbon development. The present status and challenges on the green development of Chinese steel industry are analyzed. Scenario of peak point of the total energy consumption and the total pollutant emissions for Chinese steel industry in the future are analyzed. Then, targets of green development of Chinese steel industry facing 2020 are set. It is emphasized that steel enterprises must develop in harmony with the society and should be integrated into the circular economy based on function extension. Finally, 3 leading engineering projects, 3 kinds of 35 key technologies, 5 demonstration projects and a series of strategy and policy are proposed for the green development of Chinese steel industry during the 13th five plan.
|
Received: 09 July 2015
Published: 12 October 2015
|
|
|
|
[1] |
杨朝飞,里杰兰德[瑞典].中国绿色经济发展机制和政策创新研究综合报告[M].北京:中国环境科学出版社,2012.YANG Chao-fei,Lars-Erik Liljelund.The comprehensive report of the green economy development mechanism and the study on policy innovation in China[M].Beijing: China Enviromental Science Press,2012.
|
[1] |
杨朝飞,里杰兰德[瑞典].中国绿色经济发展机制和政策创新研究综合报告[M].北京:中国环境科学出版社,2012.YANG Chao-fei,Lars-Erik Liljelund.The comprehensive report of the green economy development mechanism and the study on policy innovation in China[M].Beijing: China Enviromental Science Press,2012.
|
[2 ] |
中国环境与发展国际合作委员会编.中国经济发展方式的绿色转型[M].北京:中国环境科学出版社,2012.The editorial board of China Council for International Cooperation on Enviroment and development.The green transformation of Chinese economical development mode[M].Beijing: China Enviromental Science Press,2012.
|
[2 ] |
中国环境与发展国际合作委员会编.中国经济发展方式的绿色转型[M].北京:中国环境科学出版社,2012.The editorial board of China Council for International Cooperation on Enviroment and development.The green transformation of Chinese economical development mode[M].Beijing: China Enviromental Science Press,2012.
|
[3] |
殷瑞钰, 金涌, 张寿荣等. 中国工程院咨询项目报告《流程工业与循环经济》[R], 2007.YIN Rui-yu, JIN Yong, ZHANG Shou-rong, et al. Process industry and circular economy[R]. Advisory report for Chinese Academy of Engineering, 2007.
|
[3] |
殷瑞钰, 金涌, 张寿荣等. 中国工程院咨询项目报告《流程工业与循环经济》[R], 2007.YIN Rui-yu, JIN Yong, ZHANG Shou-rong, et al. Process industry and circular economy[R]. Advisory report for Chinese Academy of Engineering, 2007.
|
[4] |
殷瑞钰等. 中国工程院咨询项目报告《过程工程与低碳经济》[R], 2011.YIN Rui-yu, et al. Process engineering and low carbon economy[R]. Advisory report for Chinese Academy of Engineering, 2011.
|
[4] |
殷瑞钰等. 中国工程院咨询项目报告《过程工程与低碳经济》[R], 2011.YIN Rui-yu, et al. Process engineering and low carbon economy[R]. Advisory report for Chinese Academy of Engineering, 2011.
|
[5] |
殷瑞钰. 冶金流程工程学(第2版)[M]. 北京: 冶金工业出版社, 2009.YIN Rui-yu. Metallurgical process engineering(The 2nd edition)[M]. Beijing:Mechanical industry press,2009.
|
[5] |
殷瑞钰. 冶金流程工程学(第2版)[M]. 北京: 冶金工业出版社, 2009.YIN Rui-yu. Metallurgical process engineering(The 2nd edition)[M]. Beijing:Mechanical industry press,2009.
|
[6] |
殷瑞钰,张春霞. 钢铁企业功能拓展是实现循环经济的有效途径[J]. 钢铁. 2005,40(7):1-8.YIN Rui-yu, ZH ANG Chun-xia. Developing functions of steel enterprises is an effective way for realizing circular economy. Iron and Steel. 2005,40(7):1-8
|
[6] |
殷瑞钰,张春霞. 钢铁企业功能拓展是实现循环经济的有效途径[J]. 钢铁. 2005,40(7):1-8.YIN Rui-yu, ZH ANG Chun-xia. Developing functions of steel enterprises is an effective way for realizing circular economy. Iron and Steel. 2005,40(7):1-8
|
[7] |
World steel association. Crude Steel Statistics Tables 2001-2014.
|
[7] |
World steel association. Crude Steel Statistics Tables 2001-2014.
|
[8] |
中国钢铁工业五十年数字汇编编辑委员会编.中国钢铁工业五十年数字汇编(上卷)[M].北京:冶金工业出版社,2003.The editorial board of the data statistics of fifty years of China’s iron and steel industry. The data statistics of fifty years of China’s iron and steel industry(Volume1 of 2) [M].Beijing: Metallurgical Industry Press,2003.
|
[8] |
中国钢铁工业五十年数字汇编编辑委员会编.中国钢铁工业五十年数字汇编(上卷)[M].北京:冶金工业出版社,2003.The editorial board of the data statistics of fifty years of China’s iron and steel industry. The data statistics of fifty years of China’s iron and steel industry(Volume1 of 2) [M].Beijing: Metallurgical Industry Press,2003.
|
[9] |
《中国钢铁工业年鉴》编辑委员会. 中国钢铁工业年鉴[M]. 北京: 冶金工业出版社, 2014.The editorial board of China steel yearbook. China steel yearbook[M]. Beijing:Mechanical industry press,2014.
|
[9] |
《中国钢铁工业年鉴》编辑委员会. 中国钢铁工业年鉴[M]. 北京: 冶金工业出版社, 2014.The editorial board of China steel yearbook. China steel yearbook[M]. Beijing:Mechanical industry press,2014.
|
[10] |
中国金属学会,中国钢铁工业协会. 2011-2020年中国钢铁工业科学与技术发展指南[M]. 北京: 冶金工业出版社, 2012.The Chinese society for matals, China iron&steel association. Technology roadmap on Chinese steel industry 2011-2020[M]. Beijing:Mechanical industry press,2012.
|
[10] |
中国金属学会,中国钢铁工业协会. 2011-2020年中国钢铁工业科学与技术发展指南[M]. 北京: 冶金工业出版社, 2012.The Chinese society for matals, China iron&steel association. Technology roadmap on Chinese steel industry 2011-2020[M]. Beijing:Mechanical industry press,2012.
|
[11] |
ZHANG Chun-xia, ZHENG Wen-hua, ZHOU Ji-cheng, et al. Development and application of energy-saving technologies-CDQ and TRT in Chinese steel industry[C], 3rd CSM-VDEh metallurgical seminar[A]. 2011: 89~98.
|
[11] |
ZHANG Chun-xia, ZHENG Wen-hua, ZHOU Ji-cheng, et al. Development and application of energy-saving technologies-CDQ and TRT in Chinese steel industry[C], 3rd CSM-VDEh metallurgical seminar[A]. 2011: 89~98.
|
[12] |
ZHANG Chun-xia, ZHOU Ji-cheng, SHANGGUAN Fang-qin, et al. Progress and developing trend of energy saving and emission reduction for Chinese steel industry since the 21st century[C]. The 12th Japan-China symposium on science and technology of iron and steel[A]. 2010, The Iron and Steel Institute of Japan: Nogoya, Japan.
|
[12] |
ZHANG Chun-xia, ZHOU Ji-cheng, SHANGGUAN Fang-qin, et al. Progress and developing trend of energy saving and emission reduction for Chinese steel industry since the 21st century[C]. The 12th Japan-China symposium on science and technology of iron and steel[A]. 2010, The Iron and Steel Institute of Japan: Nogoya, Japan.
|
[13] |
殷瑞钰,张寿荣,干勇等. 中国工程院咨询项目报告《黑色金属矿产资源的可持续开发和综合利用》[R], 2014.YIN Rui-yu, ZHANG Shou-rong, GAN Yong, et al. Sustainable exploitation and utilization of ferrous metal mineral resources[R]. Advisory report for Chinese Academy of Engineering, 2014.
|
[13] |
殷瑞钰,张寿荣,干勇等. 中国工程院咨询项目报告《黑色金属矿产资源的可持续开发和综合利用》[R], 2014.YIN Rui-yu, ZHANG Shou-rong, GAN Yong, et al. Sustainable exploitation and utilization of ferrous metal mineral resources[R]. Advisory report for Chinese Academy of Engineering, 2014.
|
[1] |
SHANGGUAN Fang-qin, LI Xiu-ping, ZHOU Ji-cheng, WANG Fang-jie, BU Qing-cai, ZHANG Chun-xia. Strategic research on development of steel scrap resources in China[J]. Iron and Steel, 2020, 55(6): 8-14. |
[2] |
LI Xin-chuang. Road map to high-quality development of iron and steel industry in new age[J]. Iron and Steel, 2019, 54(1): 1-7. |
[3] |
WANG Xin-dong,TIAN Jing-lei,SONG Cheng-yuan. Innovative practice technology and outlook in large iron and steel enterprise green manufacturing[J]. Iron and Steel, 2018, 53(2): 1-9. |
[4] |
WANG Qing- juan,LI Xiang- jun,REN Yao- jia,ZHOU Hai- xiong. Effect of initial state on hot deformation behavior of 65 wire rod[J]. , 2018, 30(12): 998-1005. |
[5] |
FAN Ming- qiang,,MAO Lei,,ZHANG Yun- fei,TIAN Zhi- qiang,SUN Zhong- hua,QIN Sen. Effects of temperature rise on deformation behavior and microstructure of H13 steel during high temperature compression process[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 756-761. |
[6] |
SUN Jing-na,CHEN Chi,HUANG Hua-gui,ZHANG Cai-yun,WANG Shuo. Rolling force model of longitude profile LP plate based on E Orowan differential equation[J]. Iron and Steel, 2017, 52(11): 37-42. |
|
|
|
|