|
|
|
| Characteristic parameters recognition method of strip cross-sectional shape |
| WANG Dong-cheng1,2，WU Yan-lin1，LIU Hong-min1,2 |
（1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip，Yanshan University，Qinhuangdao 066004，Hebei，China
2. State Key Laboratory of Metastable Materials Science and Technology，Yanshan University，Qinhuangdao 066004，Hebei，China） |
|
|
|
|
Abstract In view of the shortcoming of existing methods to identify the characteristic parameters of strip cross-sectional shape，the reason of low general polynomial’s identification accuracy is analyzed. Based on the theory of elastic half-space，the analytical expression of roll’s elastic-flattening under polynomial distribution force is derived，which is combined with the general polynomial and regarded as the basic characteristic patterns of strip shape. The characteristic parameters are obtained by the least squares principle. The main feature of this method is，the physical meaning of characteristic parameter is clear，so it’s favorable to the adjustment of corresponding control measures after identifying. At the same time，only one function is used to describe the entire cross-sectional and no segmentation process is needed，so the calculation process is simplified. Finally， the accuracy and?stability of various methods are compared through experimental data，and the results show that the method based on elastic flattening mechanism is in?well?agreement?with experimental data no matter for the edge of strip or middle zone，so it is the most satisfying model.
|
|
Received: 18 December 2014
Published: 12 October 2015
|
|
|
|
|
|
| [1] |
何小丽, 汪峰, 孙祖春. 梅钢1420冷轧自动板形控制系统[J]. 梅山科技, 2010, 5:59-61.
|
| [1] |
何小丽, 汪峰, 孙祖春. 梅钢1420冷轧自动板形控制系统[J]. 梅山科技, 2010, 5:59-61.
|
| [2] |
冷轧机板形控制系统核心技术自主研发与工业应用[J]. 中国冶金, 2013, 4:61.
|
| [2] |
冷轧机板形控制系统核心技术自主研发与工业应用[J]. 中国冶金, 2013, 4:61.
|
| [3] |
唐成龙. 关联数据自适应模糊聚类与带钢板形前馈控制[D]. 上海：上海交通大学，2010.
|
| [3] |
唐成龙. 关联数据自适应模糊聚类与带钢板形前馈控制[D]. 上海：上海交通大学，2010.
|
| [4] |
李光瀛, 唐荻, 王先进. 汽车板深加工技术的发展[J]. 轧钢, 2013, 30(1):1-8.
|
| [4] |
李光瀛, 唐荻, 王先进. 汽车板深加工技术的发展[J]. 轧钢, 2013, 30(1):1-8.
|
| [5] |
刘华, 顾廷权, 缪明华. 带钢断面形状检测与特征参数识别方法[J].钢铁研究学报, 2012, 02: 59-62.
|
| [5] |
刘华, 顾廷权, 缪明华. 带钢断面形状检测与特征参数识别方法[J].钢铁研究学报, 2012, 02: 59-62.
|
| [6] |
Tang Cheng-long, Gu Ting-quan, Miao Ming-hua. Development of integrated measurement system of transversal thickness deviation and flatness based on laser vision compensation[C]. Proceedings of the 10th international conference on steel rolling: Metallurgical industry press, 2010:1750-1755.
|
| [6] |
Tang Cheng-long, Gu Ting-quan, Miao Ming-hua. Development of integrated measurement system of transversal thickness deviation and flatness based on laser vision compensation[C]. Proceedings of the 10th international conference on steel rolling: Metallurgical industry press, 2010:1750-1755.
|
| [7] |
连家创, 段振勇. 轧件宽展量的研究[J]. 钢铁, 1984, 19(11): 15-20.
|
| [7] |
连家创, 段振勇. 轧件宽展量的研究[J]. 钢铁, 1984, 19(11): 15-20.
|
| [8] |
王宏旭, 连家创, 陈淑云. 四辊冷轧带钢中张应力横向分布的求解[J]. 钢铁研究学报, 1996, 8(1): 16-19.
|
| [8] |
王宏旭, 连家创, 陈淑云. 四辊冷轧带钢中张应力横向分布的求解[J]. 钢铁研究学报, 1996, 8(1): 16-19.
|
| [9] |
王宏旭. 板形计算理论和工作辊辊型优化曲线的研究[D]. 秦皇岛：东北重型机械学院, 1996: 21-26.
|
| [9] |
王宏旭. 板形计算理论和工作辊辊型优化曲线的研究[D]. 秦皇岛：东北重型机械学院, 1996: 21-26.
|
| [10] |
Tang Cheng-long, Wang Shi-gang, Liang Qin-hua, et al. Improved pattern clustering algorithm for recognizing transversal distribution of steel strip thickness[J]. Journal of iron and steel, international, 2009, 16(5):50-55.
|
| [10] |
Tang Cheng-long, Wang Shi-gang, Liang Qin-hua, et al. Improved pattern clustering algorithm for recognizing transversal distribution of steel strip thickness[J]. Journal of iron and steel, international, 2009, 16(5):50-55.
|
| [11] |
刘宏民, 单修迎, 贾春玉. 板带轧制断面形状控制的矩阵模型[J]. 燕山大学学报, 2011, 35(1): 15-22.
|
| [11] |
刘宏民, 单修迎, 贾春玉. 板带轧制断面形状控制的矩阵模型[J]. 燕山大学学报, 2011, 35(1): 15-22.
|
| [12] |
白振华, 石晓东, 王瑞, 等. 4辊冷连轧机组虚拟凸度仪的设计及断面特性反馈控制技术的开发[J]. 钢铁研究学报, 2013, 25(9): 58-62.
|
| [12] |
白振华, 石晓东, 王瑞, 等. 4辊冷连轧机组虚拟凸度仪的设计及断面特性反馈控制技术的开发[J]. 钢铁研究学报, 2013, 25(9): 58-62.
|
| [13] |
V.B 金兹伯格. 姜明东, 王国栋译. 高精度板带钢轧制理论与实践[M]. 北京: 冶金工业出版社, 2002:513.
|
| [13] |
V.B 金兹伯格. 姜明东, 王国栋译. 高精度板带钢轧制理论与实践[M]. 北京: 冶金工业出版社, 2002:513.
|
| [14] |
毛红朝, 贾银芳, 曹德亮, 等. 一种带钢断面形状检测识别方法[P]. 江苏, CN101905248A, 2010-12-0.
|
| [14] |
毛红朝, 贾银芳, 曹德亮, 等. 一种带钢断面形状检测识别方法[P]. 江苏, CN101905248A, 2010-12-0.
|
| [15] |
王国栋. 板形控制和板形理论[M]. 北京: 冶金工业出版社, 1986:17-18.
|
| [15] |
王国栋. 板形控制和板形理论[M]. 北京: 冶金工业出版社, 1986:17-18.
|
| [16] |
王东城. 基于机理的板形在线设定模型研究[D]. 秦皇岛：燕山大学，2009.
|
| [16] |
王东城. 基于机理的板形在线设定模型研究[D]. 秦皇岛：燕山大学，2009.
|
| [17] |
K. L. Johnson. Contact Mechanics [M]. Cambridge University Press, 1985.
|
| [17] |
K. L. Johnson. Contact Mechanics [M]. Cambridge University Press, 1985.
|
| [18] |
何渝. 计算机常用数值算法与程序(C++版)[M]. 北京: 人民邮电出版社,2003:383-384.
|
| [18] |
何渝. 计算机常用数值算法与程序(C++版)[M]. 北京: 人民邮电出版社,2003:383-384.
|
| [1] |
QIN Da-wei, LIU Hong-min, ZHANG Dong, WANG Jun-sheng. Prediction models of coating mass per unit area for hot-dip galvanized strip based on artificial neural network[J]. Iron and Steel, 2020, 55(5): 68-72. |
| [2] |
ZHOU Cong-rui， CHEN Xiao-long， ZHOU Ming-ke，FAN Lei， MEI Peng， BAO Si-qian. Cause analysis of surface blackening of SPHC hot rolled strip after pickling[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 41-. |
| [3] |
XIAO Hong, XU Zi-an, ZHANG Chun-jie. Incremental solution of internal stress in coiling process of cold rolled strip[J]. Iron and Steel, 2020, 55(2): 82-87. |
| [4] |
ZHAO Ding-cheng，MA Shu-mei. Influence of electromagnetic screen on temperature uniformity of strip steel[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(1): 1-. |
| [5] |
MA Wei1,LI Wei-gang1,2,ZHAO Yun-tao1,YAN Bao-kang1. Prediction of hot-rolled roll force based on deep learning[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 805-815. |
| [6] |
YANG Geng-wei,LU Jia-wei,SUN Hui,FANG Zi-wei,ZHOU Yi-liao,YAO Nan. Microstructure, mechanical properties and phase transformation behavior of TiV microalloyed highstrength hotstrip steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(8): 726-732. |
|
|
|
|
2015, Vol. 50 
