|
|
|
Abstract With the wide application of welding， there is a growing concern about the cold cracks of welded joints. The diffusible hydrogen in steel weldments is one of the main reasons these lead to hydrogen assisted cracking. In this article， the source and production of diffusible hydrogen were summarized. Then this paper reviewed the measurement of diffusible hydrogen and summarized the reasons for affecting diffusible hydrogen content. And the dynamic and effect of hydrogen were analyzed emphatically. Subsequently，it introduced perniciousness and prevention of diffusible hydrogen. At last we pointed out the problems in research of diffusible hydrogen and look forward to the future of the research.
|
|
Received: 20 January 2015
Published: 12 October 2015
|
|
|
|
|
|
| [1] |
Kumar P G, Yu-ichi K.Diffusible Hydrogen in Steel Weldments -A Status Review[J].Transactions of JWRI, 2013, 42(1):39-62
|
| [1] |
Kumar P G, Yu-ichi K.Diffusible Hydrogen in Steel Weldments -A Status Review[J].Transactions of JWRI, 2013, 42(1):39-62
|
| [2] |
Lee H W.Weld metal hydrogen-assisted cracking in thick steel plate weldments[J].Materials Science and Engineering: A, 2007, 445:328-335
|
| [2] |
Lee H W.Weld metal hydrogen-assisted cracking in thick steel plate weldments[J].Materials Science and Engineering: A, 2007, 445:328-335
|
| [3] |
刘全印, 畅保钢.关于焊接材料扩散氢含量检测试验的讨论[J].焊接技术, 2011, 41(4):52-55
|
| [3] |
刘全印, 畅保钢.关于焊接材料扩散氢含量检测试验的讨论[J].焊接技术, 2011, 41(4):52-55
|
| [4] |
Dayal R K, Parvathavarthini N.Hydrogen embrittlement in power plant steels[J].Sadhana, 2003, 28(3-4):431-451
|
| [4] |
Dayal R K, Parvathavarthini N.Hydrogen embrittlement in power plant steels[J].Sadhana, 2003, 28(3-4):431-451
|
| [5] |
Brauser S, Kannengiesser T.Hydrogen absorption of different welded duplex steels[J].International journal of hydrogen energy, 2010, 35(9):4368-4374
|
| [5] |
Brauser S, Kannengiesser T.Hydrogen absorption of different welded duplex steels[J].International journal of hydrogen energy, 2010, 35(9):4368-4374
|
| [6] |
Albert S K, Padhy G K.A Brief Review on Methods for Diffusible Hydrogen Measurement in Welds[J].Indian Welding Journal, 2014, 47(2):101-113
|
| [6] |
Albert S K, Padhy G K.A Brief Review on Methods for Diffusible Hydrogen Measurement in Welds[J].Indian Welding Journal, 2014, 47(2):101-113
|
| [7] |
栗卓新, 史传伟, 李国栋, 等.焊接材料扩散氢测试精度及方法的研究进展[J].焊接, 2011, (11):17-21
|
| [7] |
栗卓新, 史传伟, 李国栋, 等.焊接材料扩散氢测试精度及方法的研究进展[J].焊接, 2011, (11):17-21
|
| [8] |
李兴霞, 崔国明, 翟德梅, 等.高强钢焊接接头扩散氢行为研究[J].电焊机, 2013, 43(8):46-48
|
| [8] |
李兴霞, 崔国明, 翟德梅, 等.高强钢焊接接头扩散氢行为研究[J].电焊机, 2013, 43(8):46-48
|
| [9] |
刘翠荣, 赵钰.焊缝金属中扩散氢的测定与分析[J].华北工学院学报, 1998, 19(4):309-311
|
| [9] |
刘翠荣, 赵钰.焊缝金属中扩散氢的测定与分析[J].华北工学院学报, 1998, 19(4):309-311
|
| [10] |
Fydrych D, ?abanowski J.Determining diffusible hydrogen amounts using the mercury method[J].Welding International, 2012, 26(9):697-702
|
| [10] |
Fydrych D, ?abanowski J.Determining diffusible hydrogen amounts using the mercury method[J].Welding International, 2012, 26(9):697-702
|
| [11] |
王晓东, 文九巴, 魏金山, 等.稀土含量对熔敷金属扩散氢逸出特性及性能的影响[J].热加工工艺, 2003, (3):16-18
|
| [11] |
王晓东, 文九巴, 魏金山, 等.稀土含量对熔敷金属扩散氢逸出特性及性能的影响[J].热加工工艺, 2003, (3):16-18
|
| [12] |
Ball D J, Gestal Jr W J, Nippes E F.Determination of Diffusible Hydrogen in Weldments by the RPI Silicone-Oil Extraction Method[J].Welding Journal, 1981, 60(3):50-54
|
| [12] |
Ball D J, Gestal Jr W J, Nippes E F.Determination of Diffusible Hydrogen in Weldments by the RPI Silicone-Oil Extraction Method[J].Welding Journal, 1981, 60(3):50-54
|
| [13] |
Nolan D, Pitrun M.A comparative study of diffusible hydrogen test methods[J].Australasian Welding Journal, 2003, 48:36-41
|
| [13] |
Nolan D, Pitrun M.A comparative study of diffusible hydrogen test methods[J].Australasian Welding Journal, 2003, 48:36-41
|
| [14] |
陈邦固, 张文钺, 杜则裕, 等.排液法测定熔敷金属中扩散氢的研究[J].焊接学报, 1984, 5(4):188-194
|
| [14] |
陈邦固, 张文钺, 杜则裕, 等.排液法测定熔敷金属中扩散氢的研究[J].焊接学报, 1984, 5(4):188-194
|
| [15] |
Jenkins N, Hart P, Parker D H.An evaluation of rapid methods for diffusible weld hydrogen[J].Welding Journal Including Welding Research Supplement, 1997, 76(1):1-6
|
| [15] |
Jenkins N, Hart P, Parker D H.An evaluation of rapid methods for diffusible weld hydrogen[J].Welding Journal Including Welding Research Supplement, 1997, 76(1):1-6
|
| [16] |
G.K. Padhy,VRamasubbu,S. K. Albert. Rapid Determination of Diffusible Hydrogen in Steel Welds Using a Modified Gas Chromatography Facility[J].J. of Testing and Evaluation, 2014, 43(1):1-11
|
| [16] |
G.K. Padhy,VRamasubbu,S. K. Albert. Rapid Determination of Diffusible Hydrogen in Steel Welds Using a Modified Gas Chromatography Facility[J].J. of Testing and Evaluation, 2014, 43(1):1-11
|
| [17] |
Kannengiesser I T, Tiersch D I F H N.Measurements of diffusible hydrogen contents at elevated temperatures using different hot extraction techniques—An international round robin test[J].Welding in the World, 2010, 54(5-6):R115-R122
|
| [17] |
Kannengiesser I T, Tiersch D I F H N.Measurements of diffusible hydrogen contents at elevated temperatures using different hot extraction techniques—An international round robin test[J].Welding in the World, 2010, 54(5-6):R115-R122
|
| [18] |
de Abreu L C, Modenesi P J, Villani‐Marques P.Comparative study of methods for determining the diffusible hydrogen content in welds[J].Welding international, 1995, 9(1):26-31
|
| [18] |
de Abreu L C, Modenesi P J, Villani‐Marques P.Comparative study of methods for determining the diffusible hydrogen content in welds[J].Welding international, 1995, 9(1):26-31
|
| [19] |
Veinot D E, Fraser P E, MacGregor L W.Measurement of diffusible hydrogen in seamed flux cored Wires for Welding of high strenght steels[J].DRDC Atlantic Report on TTCP MAT-TP1 Operating Assignment, 2007, 45(11):28-32
|
| [19] |
Veinot D E, Fraser P E, MacGregor L W.Measurement of diffusible hydrogen in seamed flux cored Wires for Welding of high strenght steels[J].DRDC Atlantic Report on TTCP MAT-TP1 Operating Assignment, 2007, 45(11):28-32
|
| [20] |
方乃文, 李连胜, 杨子佳, 等.药芯焊丝熔敷金属中扩散氢含量不同测定方法的对比研究[J].焊接, 2012, (10):43-47
|
| [20] |
方乃文, 李连胜, 杨子佳, 等.药芯焊丝熔敷金属中扩散氢含量不同测定方法的对比研究[J].焊接, 2012, (10):43-47
|
| [21] |
Benson D K, Olson D L, Smith R D, et al.Method and apparatus for determining diffusible hydrogen concentrations: U.S. Patent 7, 306, 951[P]. 2007-12-11.
|
| [21] |
Benson D K, Olson D L, Smith R D, et al.Method and apparatus for determining diffusible hydrogen concentrations: U.S. Patent 7, 306, 951[P]. 2007-12-11.
|
| [22] |
Padhy G K.Developing a Sensor for Measuring Diffusible Hydrogen Electrochemical sensors are investigated as a reliable method for determining diffusible hydrogen in welding consumables[J].Welding Journal-Including Welding Research Supplement, 2011, 90(3):47-51
|
| [22] |
Padhy G K.Developing a Sensor for Measuring Diffusible Hydrogen Electrochemical sensors are investigated as a reliable method for determining diffusible hydrogen in welding consumables[J].Welding Journal-Including Welding Research Supplement, 2011, 90(3):47-51
|
| [23] |
SMITH R D, Benson D K, PITTS J R, et al.Diffusible weld hydrogen: Measurement by fiber optic sensors[J].Materialpruefung, 2001, 43(1-2):26-29
|
| [23] |
SMITH R D, Benson D K, PITTS J R, et al.Diffusible weld hydrogen: Measurement by fiber optic sensors[J].Materialpruefung, 2001, 43(1-2):26-29
|
| [24] |
Smith R D, Benson D K, Maroef I, et al.The determination of hydrogen distribution in high-strength steel weldments part 2: opto-electronic diffusible hydrogen sensor[J].WELDING JOURNAL-NEW YORK, 2001, 80(5):122-s
|
| [24] |
Smith R D, Benson D K, Maroef I, et al.The determination of hydrogen distribution in high-strength steel weldments part 2: opto-electronic diffusible hydrogen sensor[J].WELDING JOURNAL-NEW YORK, 2001, 80(5):122-s
|
| [25] |
Lasseigne A N, McColskey J D, Koenig K, et al.Advanced non-contact diffusible hydrogen sensors for steel weldments[C]//Trends in Welding Research: Proceedings of the 8th International Conference. 2009: 424-429.
|
| [25] |
Lasseigne A N, McColskey J D, Koenig K, et al.Advanced non-contact diffusible hydrogen sensors for steel weldments[C]//Trends in Welding Research: Proceedings of the 8th International Conference. 2009: 424-429.
|
| [26] |
Koenig K, Lasseigne A N, Cisler J W, et al.Non-contact,nondestructive hydrogen and microstructural assessment of steel welds[J].International Journal of Pressure Vessels and Piping, 2010, 87(11):605-610
|
| [26] |
Koenig K, Lasseigne A N, Cisler J W, et al.Non-contact,nondestructive hydrogen and microstructural assessment of steel welds[J].International Journal of Pressure Vessels and Piping, 2010, 87(11):605-610
|
| [27] |
Alber S K.A new method to measure the diffusible hydrogen content in steel weldments using a polymer electrolyte-based hydrogen sensor[J].Welding Journal-Including Welding Research Supplement, 1997, 76(7):251-s
|
| [27] |
Alber S K.A new method to measure the diffusible hydrogen content in steel weldments using a polymer electrolyte-based hydrogen sensor[J].Welding Journal-Including Welding Research Supplement, 1997, 76(7):251-s
|
| [28] |
Pitrun M, Nolan D, Dunne D.Correlation of welding parameters and diffusible hydrogen content in rutile flux-cored arc welds[J].Australasian Welding Journal, 2004, 49:33-46
|
| [28] |
Pitrun M, Nolan D, Dunne D.Correlation of welding parameters and diffusible hydrogen content in rutile flux-cored arc welds[J].Australasian Welding Journal, 2004, 49:33-46
|
| [29] |
Bhandari D, Chhibber R, Arora N.Effect of electrode coatings on diffusible hydrogen content, hardness and microstructures of the ferritic heat affected zones in bimetallic welds[J].Advanced Materials Research, 2012, 383:4697-4701
|
| [29] |
Bhandari D, Chhibber R, Arora N.Effect of electrode coatings on diffusible hydrogen content, hardness and microstructures of the ferritic heat affected zones in bimetallic welds[J].Advanced Materials Research, 2012, 383:4697-4701
|
| [30] |
张炳范, 李午申, 李景华, 等.碱性焊条药皮组份与扩散氢的相关性[J].电焊机, 1989, (6):1-5
|
| [30] |
张炳范, 李午申, 李景华, 等.碱性焊条药皮组份与扩散氢的相关性[J].电焊机, 1989, (6):1-5
|
| [31] |
桂赤斌, 王征, 文建成.熔渣的溶氢能力与熔敷金属的扩散氢[J].焊接学报, 2008, 29(7):54-56
|
| [31] |
桂赤斌, 王征, 文建成.熔渣的溶氢能力与熔敷金属的扩散氢[J].焊接学报, 2008, 29(7):54-56
|
| [32] |
洪江波, 熊征, 陈德斌, 等.高强焊条药皮碱度对韧性与扩散氢的影响[J].焊接学报, 2008 , 29(5):18-24
|
| [32] |
洪江波, 熊征, 陈德斌, 等.高强焊条药皮碱度对韧性与扩散氢的影响[J].焊接学报, 2008 , 29(5):18-24
|
| [33] |
王征, 桂赤斌, 王禹华.高强度钢焊缝金属氢控制研究进展[J].焊接, 2008, (2):7-10
|
| [33] |
王征, 桂赤斌, 王禹华.高强度钢焊缝金属氢控制研究进展[J].焊接, 2008, (2):7-10
|
| [34] |
Du Plessis J, Du Toit M.Reducing diffusible hydrogen contents of shielded metal arc welds through addition of flux-oxidizing ingredients[J].Journal of Materials Engineering and Performance, 2008, 17(1):50-56
|
| [34] |
Du Plessis J, Du Toit M.Reducing diffusible hydrogen contents of shielded metal arc welds through addition of flux-oxidizing ingredients[J].Journal of Materials Engineering and Performance, 2008, 17(1):50-56
|
| [35] |
张文钺, 张智.氟钙钛型自保护药芯焊丝降氢机理的研究[J].中国机械工程, 1995, 6(5):57-59
|
| [35] |
张文钺, 张智.氟钙钛型自保护药芯焊丝降氢机理的研究[J].中国机械工程, 1995, 6(5):57-59
|
| [36] |
杜则裕, 丁萍.微量元素降低焊缝扩散氢含量的机理探讨[J].天津大学学报, 1995, 28(3):398-402
|
| [36] |
杜则裕, 丁萍.微量元素降低焊缝扩散氢含量的机理探讨[J].天津大学学报, 1995, 28(3):398-402
|
| [37] |
陈邦固, 丁萍.微量元素对焊缝扩散氢含量的影响[J].焊接学报, 1995, 16(2):112-117
|
| [37] |
陈邦固, 丁萍.微量元素对焊缝扩散氢含量的影响[J].焊接学报, 1995, 16(2):112-117
|
| [38] |
王岚, 杜学铭, 吕奎清.药皮原料粒径对其熔敷金属扩散氢含量的影响[J].焊接技术, 2010, 39(10):50-51
|
| [38] |
王岚, 杜学铭, 吕奎清.药皮原料粒径对其熔敷金属扩散氢含量的影响[J].焊接技术, 2010, 39(10):50-51
|
| [39] |
White D, Pollard G, Gee R.The Effects of Welding Parameters on Diffusible Hydrogen Levels in Cored Wire Welding[J].Welding and Metal Fabrication(UK), 1992, 60(5):209-210
|
| [39] |
White D, Pollard G, Gee R.The Effects of Welding Parameters on Diffusible Hydrogen Levels in Cored Wire Welding[J].Welding and Metal Fabrication(UK), 1992, 60(5):209-210
|
| [40] |
Bracarense A Q, Souza R, Costa M C M, et al.Welding current effect on diffusible hydrogen content in flux cored arc weld metal[J].Journal of the Brazilian Society of Mechanical Sciences, 2002, 24(4):278-285
|
| [40] |
Bracarense A Q, Souza R, Costa M C M, et al.Welding current effect on diffusible hydrogen content in flux cored arc weld metal[J].Journal of the Brazilian Society of Mechanical Sciences, 2002, 24(4):278-285
|
| [41] |
Therese Dahlstrom.Multivariate analysis of results from international Round Robin on diffusible hydrogen[C]. 63rd Annual Meeting of IIW. Singapore, Doc II-1721-09.
|
| [41] |
Therese Dahlstrom.Multivariate analysis of results from international Round Robin on diffusible hydrogen[C]. 63rd Annual Meeting of IIW. Singapore, Doc II-1721-09.
|
| [42] |
尹士科, 王移山, 李凤辉.焊缝中氢的扩散行为及影响因素[J].钢铁研究学报, 2013, 25(5):39-43
|
| [42] |
尹士科, 王移山, 李凤辉.焊缝中氢的扩散行为及影响因素[J].钢铁研究学报, 2013, 25(5):39-43
|
| [43] |
余巍, 张京海.环境条件对熔敷金属中扩散氢含量的影响[J].材料开发与应用, 1999, 14(1):8-11
|
| [43] |
余巍, 张京海.环境条件对熔敷金属中扩散氢含量的影响[J].材料开发与应用, 1999, 14(1):8-11
|
| [44] |
Ozaki H, Naiman J, Masubuchi K.A study of hydrogen cracking in underwater steel welds[J].Welding Journal, 1977, (8):231-236
|
| [44] |
Ozaki H, Naiman J, Masubuchi K.A study of hydrogen cracking in underwater steel welds[J].Welding Journal, 1977, (8):231-236
|
| [45] |
程方杰, 胡生辉, 高文斌, 等.水下焊条电弧焊扩散氢含量及焊缝组织特征分析[J].焊接学报, 2014, 35(9):45-49
|
| [45] |
程方杰, 胡生辉, 高文斌, 等.水下焊条电弧焊扩散氢含量及焊缝组织特征分析[J].焊接学报, 2014, 35(9):45-49
|
| [46] |
Fydrych D, Rogalski G.Effect of underwater local cavity welding method conditions on diffusible hydrogen content in deposited metal[J].Welding International, 2013, 27(3):196-202
|
| [46] |
Fydrych D, Rogalski G.Effect of underwater local cavity welding method conditions on diffusible hydrogen content in deposited metal[J].Welding International, 2013, 27(3):196-202
|
| [47] |
朱亮, 张爱华.水蒸气保护电弧焊焊缝的氢质量分数[J].机械工程学报, 2002, 38(8):143-146
|
| [47] |
朱亮, 张爱华.水蒸气保护电弧焊焊缝的氢质量分数[J].机械工程学报, 2002, 38(8):143-146
|
| [48] |
刘忠杰, 肖桐, 覃庆泽.焊缝金属中可扩散氢含量的试验研究[J].兵器材料科学与工程, 2003, 26(5):44-45
|
| [48] |
刘忠杰, 肖桐, 覃庆泽.焊缝金属中可扩散氢含量的试验研究[J].兵器材料科学与工程, 2003, 26(5):44-45
|
| [49] |
柯黎明.焊缝金属铁素体含量对氢裂敏感性的影响[J].焊接学报, 1993, (3):6-10
|
| [49] |
柯黎明.焊缝金属铁素体含量对氢裂敏感性的影响[J].焊接学报, 1993, (3):6-10
|
| [50] |
张显辉, 焦伟, 谭长瑛.20MnNiMo 钢焊接氢致裂纹特征 (Ⅱ) [J].焊接学报, 2002, (3):5-10
|
| [50] |
张显辉, 焦伟, 谭长瑛.20MnNiMo 钢焊接氢致裂纹特征 (Ⅱ) [J].焊接学报, 2002, (3):5-10
|
| [51] |
Kotecki D J, LaFave R A.AWS A5 Committee studies of weld metal diffusible hydrogen[J].Welding Journal, 1985, 64(3):31-37
|
| [51] |
Kotecki D J, LaFave R A.AWS A5 Committee studies of weld metal diffusible hydrogen[J].Welding Journal, 1985, 64(3):31-37
|
| [52] |
欧阳跃军.氢在钢中的扩散与氢渗透传感器的研究[D]. 湖南大学, 2013.
|
| [52] |
欧阳跃军.氢在钢中的扩散与氢渗透传感器的研究[D]. 湖南大学, 2013.
|
| [53] |
王晓东.熔敷金属成分和组织对扩散氢逸出特性及焊缝性能的影响[D]. 河南科技大学, 2003
|
| [53] |
王晓东.熔敷金属成分和组织对扩散氢逸出特性及焊缝性能的影响[D]. 河南科技大学, 2003
|
| [54] |
郑秀芳, 陈廉.焊接接头氢陷阱性质及捕获氢能力[J].钢铁研究, 1998, (5):40-42
|
| [54] |
郑秀芳, 陈廉.焊接接头氢陷阱性质及捕获氢能力[J].钢铁研究, 1998, (5):40-42
|
| [55] |
Maroef I, Olson D L, Eberhart M, et al.Hydrogen trapping in ferritic steel weld metal[J].International Materials Reviews, 2002, 47(4):191-223
|
| [55] |
Maroef I, Olson D L, Eberhart M, et al.Hydrogen trapping in ferritic steel weld metal[J].International Materials Reviews, 2002, 47(4):191-223
|
| [56] |
杜则裕, 秦伯雄.合金钢焊接区显微组织与扩散氢的动态分布关系[J].焊接学报, 1994, 15(4):254-261
|
| [56] |
杜则裕, 秦伯雄.合金钢焊接区显微组织与扩散氢的动态分布关系[J].焊接学报, 1994, 15(4):254-261
|
| [57] |
张智, 杜则裕.低合金钢焊接接头扩散氢的局部聚集规律[J].天津大学学报, 1997, 30(2):205-210
|
| [57] |
张智, 杜则裕.低合金钢焊接接头扩散氢的局部聚集规律[J].天津大学学报, 1997, 30(2):205-210
|
| [58] |
杜则裕, 张智.合金钢焊接区扩散氢的动态分布[J].中国机械工程, 1994, 5(1):10-13
|
| [58] |
杜则裕, 张智.合金钢焊接区扩散氢的动态分布[J].中国机械工程, 1994, 5(1):10-13
|
| [59] |
Yue X, Feng X L, Lippold J C.Effect of diffusible hydrogen level on heat-affected zone hydrogen-induced cracking of high-strength steels[J].Welding in the World, 2014, 58(1):101-109
|
| [59] |
Yue X, Feng X L, Lippold J C.Effect of diffusible hydrogen level on heat-affected zone hydrogen-induced cracking of high-strength steels[J].Welding in the World, 2014, 58(1):101-109
|
| [60] |
张京海, 魏金山, 王晓东.熔敷金属扩散氢逸出的数学模型[J].焊接学报, 2003, 24(4):73-78
|
| [60] |
张京海, 魏金山, 王晓东.熔敷金属扩散氢逸出的数学模型[J].焊接学报, 2003, 24(4):73-78
|
| [61] |
李亚江, 沈孝芹.钢焊接区扩散氢分布的数值分析[J].焊接学报, 2001, 22(3):39-43
|
| [61] |
李亚江, 沈孝芹.钢焊接区扩散氢分布的数值分析[J].焊接学报, 2001, 22(3):39-43
|
| [62] |
Yan C, Liu C, Yan B.3D modeling of the hydrogen distribution in X80 pipeline steel welded[J].jointsComputational Materials Science, 2014, 83:158-163
|
| [62] |
Yan C, Liu C, Yan B.3D modeling of the hydrogen distribution in X80 pipeline steel welded[J].jointsComputational Materials Science, 2014, 83:158-163
|
| [63] |
巩建鸣, 蒋文春, 唐建群, 等.钢焊接接头氢扩散三维有限元模拟[J].机械工程学报, 2007, 43(9):113-118
|
| [63] |
巩建鸣, 蒋文春, 唐建群, 等.钢焊接接头氢扩散三维有限元模拟[J].机械工程学报, 2007, 43(9):113-118
|
| [64] |
蒋文春, 巩建鸣, 唐建群, 等.焊接残余应力下氢扩散的数值模拟[J].焊接学报, 2006, 27(11):57-60
|
| [64] |
蒋文春, 巩建鸣, 唐建群, 等.焊接残余应力下氢扩散的数值模拟[J].焊接学报, 2006, 27(11):57-60
|
| [65] |
Olden V, Alvaro A, Akselsen O M.Hydrogen diffusion and hydrogen influenced critical stress intensity in an API X70 pipeline steel welded joint–Experiments and FE simulations[J].International journal of hydrogen energy, 2012, 37(15):11474-11486
|
| [65] |
Olden V, Alvaro A, Akselsen O M.Hydrogen diffusion and hydrogen influenced critical stress intensity in an API X70 pipeline steel welded joint–Experiments and FE simulations[J].International journal of hydrogen energy, 2012, 37(15):11474-11486
|
| [66] |
Ishikawa N, Sueyoshi H, Endo S.Critical Condition for Hydrogen Induced Cold Cracking of High Strength Weld Metal[C]//2014 10th International Pipeline Conference. American Society of Mechanical Engineers, 2014: V003T07A013.
|
| [66] |
Ishikawa N, Sueyoshi H, Endo S.Critical Condition for Hydrogen Induced Cold Cracking of High Strength Weld Metal[C]//2014 10th International Pipeline Conference. American Society of Mechanical Engineers, 2014: V003T07A013.
|
| [67] |
张文钺, 周振丰.焊接冶金与金属焊接性[M]. 北京: 机械工业出版社, 1987.
|
| [67] |
张文钺, 周振丰.焊接冶金与金属焊接性[M]. 北京: 机械工业出版社, 1987.
|
| [68] |
张文钺, 祝美丽, 秦伯雄.焊接冷裂敏感性的有效扩散氢及氢扩散因子[J].焊接学报, 1991, 12(3):129-135
|
| [68] |
张文钺, 祝美丽, 秦伯雄.焊接冷裂敏感性的有效扩散氢及氢扩散因子[J].焊接学报, 1991, 12(3):129-135
|
| [69] |
潘川, 李正邦, 梁东图, 等.奥氏体不锈钢焊缝金属氢致滞后断裂门槛值的研究[J].金属学报, 2001, (3):15-19
|
| [69] |
潘川, 李正邦, 梁东图, 等.奥氏体不锈钢焊缝金属氢致滞后断裂门槛值的研究[J].金属学报, 2001, (3):15-19
|
| [70] |
Pokhodnya I K, Paltsevich A P, Golovko V V, et al.Technology and metallurgy methods for decreasing diffusible hydrogen content[J].WELDING RESEARCH ABROAD, 2000, 46(5):2-11
|
| [70] |
Pokhodnya I K, Paltsevich A P, Golovko V V, et al.Technology and metallurgy methods for decreasing diffusible hydrogen content[J].WELDING RESEARCH ABROAD, 2000, 46(5):2-11
|
| [71] |
姚润钢, 李午申, 李少兵, 等.型焊条烘焙温度对扩散氢含量及相关性能的影响[J].焊接技术, 2006, 35(2):17-19
|
| [71] |
姚润钢, 李午申, 李少兵, 等.型焊条烘焙温度对扩散氢含量及相关性能的影响[J].焊接技术, 2006, 35(2):17-19
|
| [72] |
Du Plessis J.Control of diffusible weld metal hydrogen through arc chemistry modifications[D]. University of Pretoria, 2007.
|
| [72] |
Du Plessis J.Control of diffusible weld metal hydrogen through arc chemistry modifications[D]. University of Pretoria, 2007.
|
| [73] |
Padhy G K, Ramasubbu V, Murugesan N, et al.Effect of preheat and post-heating on diffusible hydrogen content of welds[J].Science and Technology of Welding and Joining, 2012, 17(5):408-413
|
| [73] |
Padhy G K, Ramasubbu V, Murugesan N, et al.Effect of preheat and post-heating on diffusible hydrogen content of welds[J].Science and Technology of Welding and Joining, 2012, 17(5):408-413
|
| [1] |
HAN Yi, XIAO Yao, ZHANG Ao-yin, ZHAO Yu-fei, LIU Feng, LI Hong-bin. Recessive defects in electromagnetic heating process of electrical resistance welding steel pipe[J]. Iron and Steel, 2020, 55(1): 108-118. |
| [2] |
WANG Bingxing，ZHU Fuxian，WANG Chao，LOU Haonan，. Application of oxide metallurgy in high heat input welding steels[J]. Iron and Steel, 2019, 54(9): 12-21. |
| [3] |
WANG Yunan，JIANG Xiaofang. Investigation on inclusions and microstructure of #br#
offshore steel for high heat input welding[J]. Iron and Steel, 2019, 54(8): 209-215. |
| [4] |
ZHANG Nan,TIAN Zhi-ling,ZHANG Shu-yan,XIANG Ming,HE Yu-qi,DONG Xian-chun. Prediction of fatigue life and behavior analysis of small crack propagation in CGHAZ of Q700D[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(8): 741-747. |
| [5] |
YU Enlin， XIAO Yao， LIU Feng， LI Dalong， HAN Yi， ZHAO Yuqian. Welding and heat treatment of high frequency longitudinal welded pipe[J]. Iron and Steel, 2019, 54(6): 1-10. |
| [6] |
ZHANG Nan,TIAN Zhi-ling,ZHANG Shu-ling,DONG Xian-chun,PAN Hui1,ZHANG Xi. Mechanism and solution of welding softening for 700MPa microalloyed high strength steel#br#[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(3): 318-326. |
|
|
|
2015, Vol. 50 
