|
|
Research on the bonding properties of Q345B cladding heavy steel plate |
LI Wen-bin,YUAN Si-yu,LI Guang-long,FEI Jing |
Iron and Steel Research Institute, Angang Group, Anshan 114009, Liaoning, China |
|
|
Abstract In order to develop thick steel plate which is more than 150 mm thickness, the process which consists of the application of Q345B continuous casting slab with surface scarfing, vacuum welding and heat in chamber furnace, and the rolling by heavy steel plate mill was used to produce cladding heavy steel plate 200 mm in thickness. The bonding degree and mechanical properties were tested by flaw detection, tensile, shear and cold bending tests. Microstructure and the tensile fracture of heavy steel plate were analyzed by means of optical microscope and scanning electron microscope. Results show that the heavy steel plate produced by current process has good bonding properties and can satisfy the GB/T 7734—2004Ⅰdemand of flaw detection. Both the structure at bonding site and matrix structure are ferrite plus pearlite. The reduction on cross section in thickness direction reaches more than 35%.
|
Received: 21 April 2015
Published: 29 October 2015
|
|
|
|
[1] |
Zang Y,Cao J N,Hu X Z,The analyzed for the processing way toproduct heavy plate by ingot / /2009 CSM Annual Meeting Proceedings,2009’3: 141( 臧悦,曹建宁,胡小卓.采用钢锭生产特厚板工艺方案的探讨/ /第七届中国钢铁年会论文集,2009’3: 141)
|
[1] |
Zang Y,Cao J N,Hu X Z,The analyzed for the processing way toproduct heavy plate by ingot / /2009 CSM Annual Meeting Proceedings,2009’3: 141( 臧悦,曹建宁,胡小卓.采用钢锭生产特厚板工艺方案的探讨/ /第七届中国钢铁年会论文集,2009’3: 141)
|
[2] |
Wang G L, Luo Z A, Xie G M et al. Experiment Research on Impact of Total Rolling Reduction Ratio on the Properties of Vacuum Rolling-Bonding Ultra-Thick steel plate [J]. Advanced Materials Research, 2011, 299: 962-965.
|
[2] |
Wang G L, Luo Z A, Xie G M et al. Experiment Research on Impact of Total Rolling Reduction Ratio on the Properties of Vacuum Rolling-Bonding Ultra-Thick steel plate [J]. Advanced Materials Research, 2011, 299: 962-965.
|
[3] |
Nishida S, Matsuoka T, Wada T. Technology and Products of JFE Steel’s Three Plate Mills [J]. JFE Technological Report, 2005, 5(3): 1-8.[4] Wang D W,The new progress of the production technology for ultra-heavy plate,China Steel Focus,2009’5: 56( 王定武.特厚钢板制造技术的新进展.冶金管理.2009’5:56)
|
[3] |
Nishida S, Matsuoka T, Wada T. Technology and Products of JFE Steel’s Three Plate Mills [J]. JFE Technological Report, 2005, 5(3): 1-8.[4] Wang D W,The new progress of the production technology for ultra-heavy plate,China Steel Focus,2009’5: 56( 王定武.特厚钢板制造技术的新进展.冶金管理.2009’5:56)
|
[5] |
福田隆 齑藤康信 复合钢板的轧制技术《塑性と加工》2003,44(512),14
|
[5] |
福田隆 齑藤康信 复合钢板的轧制技术《塑性と加工》2003,44(512),14
|
[6] |
崔忠主编 金属学与热处理[M] 北京:机械工业出版社,1997;
|
[6] |
崔忠主编 金属学与热处理[M] 北京:机械工业出版社,1997;
|
[1] |
CAI Zhen, LIANG Wen, WANG Shui-ze, LIU Yong-qian. Discussion about practice and process of ferrite rolling in Ti-IF steel[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 7-. |
[2] |
MAO Jinghua,SHUAI Yong,XIE Guiqiang,WANG Yatao. Key technology of internal quality control for#br# continuous casting extrathick slab[J]. Iron and Steel, 2019, 54(8): 64-69. |
[3] |
. Research on Central segregation control of 400mm ultra-thick slab[J]. , 2019, 44(6): 0-0. |
[4] |
GAO Zhi-yu1, FAN Xian-jin1, DOU Chun-yue1, ZHANG Xu1, PAN Tao2. Simulation analysis on transfer law of deformation in thickness direction of ultra-heavy plate[J]. Iron and Steel, 2019, 54(4): 49-54,62. |
[5] |
KANG Yong-lin, TIAN Peng, ZHU Guo-ming. Progress and trend on hot wide strip endless rolling technology[J]. Iron and Steel, 2019, 54(3): 1-8. |
[6] |
. Development of SAE8620 gear steel hot rolled wire coil[J]. , 2019, 44(3): 0-0. |
|
|
|
|