|
|
Effect of boron and titanium on microstructure and properties of low carbon Al-killed steel |
RUAN Shi-peng1,2,3,ZHAO Ai-min1,GUO Ming-yi2,3,HAN Guang-jie2,3,LI Jun2, 3 |
1. Metallurgy Engineering Research Institute,University of Science and Technology Beijing,Beijing 100083,China 2. Technology Center,Xingtai Iron and Steel Co.,Ltd.,Xingtai 054027,Hebei,China 3. Hebei Engineering Research Center for Wire Rod,Xingtai 054027,Hebei,China |
|
|
Abstract The effect of boron and titanium on the microstructure and properties of low carbon Al-killed steel 08Al was studied by adding individual and both. The results show that the yield and tensile strength of 08Al had little change with adding trace (0.002 0%) boron alone, but the yield strength and tensile strength enhanced about 20 MPa with adding 0.057%Ti alone. The strength of 08Al significantly increased with adding both 0.004 8%B and 0.07%Ti, the yield strength value enhanced from 260 to 316 MPa and the tensile strength value enhanced from 363 to 463 MPa. The reason for high strength of 08Al+B+Ti steel is that quasi-polygonal ferrite with high dislocation density is obtained, at the same time, the phase transformation strengthening of fine lamellar pearlite has a certain contribution to the high strength.
|
Received: 14 January 2016
Published: 11 July 2016
|
|
|
|
[1] |
CHENG Xiang-kui, ZHAO Ying-tao, ZHAO Xu, WANG Jun, HUANG Xiao-li, PU Chun-lei. Preparation of V-Ti magnetite ore basic pellet containing NaOH[J]. Iron and Steel, 2020, 55(6): 33-37. |
[2] |
MA Li-ming,ZHANG Jian-liang,WU Sheng-li,LIU Zheng-jian,WANG Yao-zu,XU Chen-yang. Treatment of vanadiumtitanium magnetite based on fluxed green ball composite agglomeration process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 462-469. |
[3] |
LI Xiao-yuan,SHI Jie. Ballistic behavior of high strength steel targets during high speed impact of projectile[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 429-436. |
[4] |
RONG Tao, TANG Hui-qing, FAN Kai, SUN Yan-jun. Applying high-carbon metallic briquette in blast furnace for coke saving[J]. Iron and Steel, 2020, 55(5): 10-19. |
[5] |
HE Zhan-wei, XUE Xiang-xin. Basic sintering characteristics of several typical vanadium titanium magnetite[J]. Iron and Steel, 2020, 55(5): 20-25. |
[6] |
ZENG Ze-yun, LI Chang-rong, LI Zhi-ying, LIU Zhan-lin,LI Zheng-song, ZHAI Yong-qiang. Thermodynamic analysis of titanium precipitation in HRB500E seismic steel[J]. Iron and Steel, 2020, 55(5): 45-51. |
|
|
|
|