|
|
Polynomial SSC model on roughing mill |
LI Xue-tong1,LI Dong-ying1,ZANG Xin-liang1,YU Feng-qin1,HU Jian-ping2,DU Feng-shan1 |
(1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,Yanshan University,Qinhuangdao 066004,Hebei,China 2. Department of Rolling Steel,CISDI Engineering Co.,Ltd.,Chongqing 401122,China) |
|
|
Abstract The Short Stroke Control(SSC) is an effective way to improve the shape of slab head and tail and reduce metal loss during the process of roughing mill to adjust the width of slab. While the present broken line SSC model,which is often used, needs to be improved. Based on the processing parameters of some hot strip roughing mill group,a coupling thermal-mechanical numerical simulation model for vertical and horizontal rolling was established using rigid-plastic finite element method,by which the unsteady deformation of strip ends in roughing mill was deeply analyzed and the change of the width reduction at the ends of slab was obtained. According to the simulated results obtained,a fifth polynomial SSC strategy was proposed,and the corresponding polynomial SSC model was determined. Through comparison among simulated results,it can be showed that the new established polynomial SSC model has a better ability to improve the shape of strip ends and increase the yield of hot strip product.
|
Received: 19 October 2015
Published: 11 July 2016
|
|
|
|
[1] |
YUAN Guo,CHEN Dong,KANG Jian,LI Zhen- lei,WANG Guo- dong. Development and application of NG- TMCP technology based on ultra- fast cooling for large scale hot rolled strip lines[J]. , 2019, 31(2): 150-158. |
[2] |
SU Lan,SONG Yong,ZHENG Yong-gang,GAO Zhi-gang. Influence of slab chamfer on spread and improvement of width control model in rough rolling[J]. Iron and Steel, 2018, 53(6): 70-75. |
[3] |
WANG Ze-peng,,XIAO Peng-cheng,,ZHU Li-guang,,LIU Zeng-xun,,ZHANG Shi-jun,. Temperature analysis for mold copper tube of billet continuous casting[J]. Iron and Steel, 2018, 53(3): 38-43. |
[4] |
HE Qing-qiang,ZHU Han,GENG Chun-li,CHAI Wan-li,LIU Jian-guo. Simulation and test of ultrasonic vibration effect on low carbon steel hot compression[J]. Iron and Steel, 2018, 53(10): 61-66. |
[5] |
SONG Guang-yi,YANG Quan,WANG Xiao-chen,ZHANG Xi-bang, WANG Feng-mei,WANG Qiu-na. Work roll wear law for hot strip temper mill[J]. Iron and Steel, 2017, 52(9): 54-59. |
[6] |
YANG Jie,CHENG Zheng- zhong,HU Qi,WANG Lei- chuan,ZHANG Zhan- guo,FU Yu. Analysis and optimization about color aberration of strip steel in galvanizing and tension leveler unit[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 739-748. |
|
|
|
|