|
|
|
| Fast shape prediction method for six-high cold rolling mill |
| WANG Dong-cheng1,2，ZHANG Wei1，WANG Zhi-jie1，LIU Hong-min1,2 |
（1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling， Yanshan University，Qinhuangdao 066004， Hebei， China
2. State Key Laboratory of Metastable Materials Science and Technology，Yanshan University， Qinhuangdao 066004， Hebei， China ） |
|
|
|
|
Abstract Compared with the shape prediction of the four-high mill，there are more unknowns obout the six-high mill，and the calculation speed is slower. Therefore，the model coupling method is extended to the six-high mill，and the linear equations of the strip plastic deformation models and the elastic deformation model of roll system are established. Considering the input parameters of flatness problems usually does not include the no-load roll gap value，a new linear equation is proposed according to the average thickness of the strip at exit. The value of the no-load roll gap is incorporated into the unknown quantity. Therefore，the applicability of the model coupling method is improved. Two calculation examples show that，when applied to six-high mill，the calculation results of model coupling method are in well agreement with the calculation results of relaxation factor method，but it can increase the calculation speed by about 100 times.
|
|
Received: 14 January 2016
Published: 29 August 2016
|
|
|
|
|
|
| [7] |
李耀辉,李定国. 马钢CSP热轧PFC板形模型的分析与应用[J]. 中国冶金, 2015, 25(11): 40-44.LI Yao-hui, LI Ding-guo, et al. Analysis and application of Ma steel CSP hot rolling PFC shape model[J]. China Metallurgy, 2015, 25(11): 40-44.
|
| [1] |
何安瑞,邵健,凌智,等. 1580mm热带钢轧机板形控制系统[J]. 钢铁, 2011, 46(3): 47-50.HE An-rui, SHAO Jian, LING Zhi,et al. Strip shape control system of 1580mm hot strip mill[J]. Iron and Steel, 2011, 46(3): 47-50.
|
| [8] |
丁顺风, 杨利坡, 于丙强. 基于模糊评判规则的冷轧带钢智能板形评价模型[J]. 钢铁, 2014, 49(9): 61-63, 70.DING Shun-feng, YANG Li-po, YU Bing-qiang. Study on Automatic Flatness Control Principle of Foil Mill [J]. Iron and Steel, 2014, 49(9): 61-63, 70.
|
| [2] |
王晓晨,杨荃,孙友昭. 六辊冷轧机的弯辊力组合板形控制策略[J]. 北京科技大学学报, 2014,36(6):824-829.Wang Xian-chen, Yang Quan, Sun You-zhao, et al. Combination of plate shape control strategy of six roll cold rolling mill bending roll force [J]. Journal of University of Science and Technology Beijing, 2014,36(6):824-829.
|
| [3] |
包仁人,张杰,李洪波,等. 非对称板形对连续退火炉内带钢跑偏的影响[J]. 钢铁, 2015,50(5):34-37.BAO Ren-ren, ZHANG Jie, LI Hong-bo,et al. Effect of continuous annealing furnace strip shape of asymmetrical plate [J]. Iron and Steel, 2015,50(5):34-37.
|
| [9] |
王东城, 赵章献, 刘宏民. 冷轧带钢板形高效分析与设定软件及其应用[J]. 钢铁, 2015, 50(7):54-60.WANG Dong-cheng, ZHAO Zhang-xian, LIU Hong-min. High-efficiency software and its application for shape analysis and presetting of cold rolling strip [J]. Iron and Steel, 2015, 50(7):54-60.
|
| [4] |
张殿华, 刘佳伟, 王军生, 等. 带钢冷连轧板形功效系数自学习计算模型[J]. 钢铁, 2010, 45(3): 52-56.ZHANG Dian-hua, LIU Jia-wei, WANG Jun-sheng, et al. Self-Learning model of cold-strip mill based on the actuator efficiency factor of shape control [J]. Iron and Steel, 2010, 45(3): 52-56.
|
| [10] |
王东城, 吴燕林, 刘宏民. 四辊轧机辊系弹性变形高效计算方法[J]. 钢铁, 2015, 50(11):69-74.WANG Dong-cheng, WU Yan-lin, LIU Hong-min. High-efficiency calculation method for roll stack elastic deformation of four-high mill [J]. Iron and Steel, 2015, 50(11):69-74.
|
| [5] |
郝亮, 邸洪双, 龚殿尧, 等. 箔材轧机板形控制原理的研究[J]. 中国冶金, 2011, 21(3): 1-3, 23.HAO Liang, DI Hong-shuang, GONG Dian-yao, et al. Study on Automatic Flatness Control Principle of Foil Mill [J]. China Metallurgy, 2011, 21(3): 1-3, 23.
|
| [6] |
麻永林,宫美娜,邢淑清,等. 304不锈钢带板形控制的有限元分析[J]. 钢铁, 2015,50(2):48-53.MA Yong-lin, GONG Mei-na, XING Shu-qing, et al. Finite element analysis of shape control of 304 stainless steel strip[J]. Iron and Steel, 2015,50(2):48-53.
|
| [7] |
李耀辉,李定国. 马钢CSP热轧PFC板形模型的分析与应用[J]. 中国冶金, 2015, 25(11): 40-44.LI Yao-hui, LI Ding-guo, et al. Analysis and application of Ma steel CSP hot rolling PFC shape model[J]. China Metallurgy, 2015, 25(11): 40-44.
|
| [8] |
丁顺风, 杨利坡, 于丙强. 基于模糊评判规则的冷轧带钢智能板形评价模型[J]. 钢铁, 2014, 49(9): 61-63, 70.DING Shun-feng, YANG Li-po, YU Bing-qiang. Study on Automatic Flatness Control Principle of Foil Mill [J]. Iron and Steel, 2014, 49(9): 61-63, 70.
|
| [9] |
王东城, 赵章献, 刘宏民. 冷轧带钢板形高效分析与设定软件及其应用[J]. 钢铁, 2015, 50(7):54-60.WANG Dong-cheng, ZHAO Zhang-xian, LIU Hong-min. High-efficiency software and its application for shape analysis and presetting of cold rolling strip [J]. Iron and Steel, 2015, 50(7):54-60.
|
| [10] |
王东城, 吴燕林, 刘宏民. 四辊轧机辊系弹性变形高效计算方法[J]. 钢铁, 2015, 50(11):69-74.WANG Dong-cheng, WU Yan-lin, LIU Hong-min. High-efficiency calculation method for roll stack elastic deformation of four-high mill [J]. Iron and Steel, 2015, 50(11):69-74.
|
| [11] |
WANG Dong-cheng, LIU Hong-min . A model coupling method for shape prediction [J]. Journal of Iron and Steel Research, International, 2012, 19(2):22-27.
|
| [11] |
WANG Dong-cheng, LIU Hong-min . A model coupling method for shape prediction [J]. Journal of Iron and Steel Research, International, 2012, 19(2):22-27.
|
|
|
|
2016, Vol. 51 
