|
|
|
| Numerical simulation of scarfing machine burners flame characteristics |
| CHEN Zhi-yong， WANG Jing-bo， TIAN Yong |
| （Steelmaking General Plant， Ansteel Co.， Ltd.， Anshan 114021， Liaoning， China） |
|
|
|
|
Abstract Scarfing machine system is a method to remove surface defects using hot flame cutting and melting， to obtain products with high quality. The research is mainly focused on improving process precision， optimizing control process and allocating mediums. Investigation on scarfing flame using CFD simulation can clearly reflect the flame characteristics， reveal the essence and solve practical problems. In the current study， a numerical simulation model of flow field was calculated based on the scarfing units in Ansteel Co. Ltd， the process from the state of preheating to the state of scarfing was researched based on CFD transient combustion simulation. This paper discussed the flame characteristics and the growth rhythm of molten pool by analyzing the temperature and velocity fields under different conditions. The results provided certain theoretical basis of functional characteristics and optimization design of burner.
|
|
Received: 09 May 2016
Published: 02 November 2016
|
|
|
|
|
|
| [1] |
施国优.热火焰清理之探讨[J].宝钢技术，1990(3):41-45
|
| [2] |
肖文忠.火焰清理机及其应用[J].中国学术期刊电子出版社，2012:23-27
|
| [1] |
施国优.热火焰清理之探讨[J].宝钢技术，1990(3):41-45
|
| [2] |
肖文忠.火焰清理机及其应用[J].中国学术期刊电子出版社，2012:23-27
|
| [3] |
闫媛媛，张勇.基于ANSYSCFX的反应炉燃烧传热数值模拟研究[J].陕西科技大学学报，2013，31(5)：135-138
|
| [3] |
闫媛媛，张勇.基于ANSYSCFX的反应炉燃烧传热数值模拟研究[J].陕西科技大学学报，2013，31(5)：135-138
|
| [4] |
齐凤升，陈家俊.火焰清理机密排孔群射流掺混特性的模拟研究[J].中国冶金，2014,24:158-162
|
| [4] |
齐凤升，陈家俊.火焰清理机密排孔群射流掺混特性的模拟研究[J].中国冶金，2014,24:158-162
|
| [5] |
连铸坯高质量火焰清理技术[C].东北特钢：东北特殊钢集团有限责任公司，2012
|
| [5] |
连铸坯高质量火焰清理技术[C].东北特钢：东北特殊钢集团有限责任公司，2012
|
| [1] |
HUA Fu- an,ZHANG Zheng,LI Jian- ping,ZHANG Hong- rui,WEI Rui- jiang. Research and development of direct flame impingement heating technology[J]. , 2019, 31(2): 168-173. |
| [2] |
Lü Ming1,LI Hang1,YANG Lingzhi2,LI Xiaoming1, XING Xiangdong1,YANG Zeshi2. Effect of bottom blowing flow rate near EBT area on EAF steelmaking[J]. Iron and Steel, 2019, 54(10): 38-44. |
| [3] |
ZHU Guang- ming,YIN Ji- li,REN Qing- wen,DING Ming- kai,MIN Fan- lei,CAO Xiao- lin. Optimization on nozzle structure of delivery system based on FEM[J]. , 2019, 31(1): 8-14. |
| [4] |
ZHANG Jiong，WANG Gan，FAN Hai-ning，ZHANG Li-xin，ZHOU Ya-hui，WANG Quan. Production Practice of Ma Steel Slab Scarfing Machine[J]. , 2018, 43(6): 38-41. |
| [5] |
LOU Wen-tao，LIU Zhuang，WANG Xiao-yu，ZHU Miao-yong. Numerical simulation of slag-metal reaction and desulfurization behavior in gas-stirred ladle[J]. Iron and Steel, 2018, 53(12): 37-43. |
| [6] |
ZHAO Chang- liang,WANG Cheng- yi,SUN Yan- hui,WANG Zheng,SHEN Hong- jun. Physical simulation analysis of a 300 t duplex combined blown dephosphorization converter[J]. Chinese Journal of Iron and Steel, 2015, 27(12): 42-47. |
|
|
|
|
2016, Vol. 51 
