|
|
Design of strip edge grinding device for finishing line |
BAI Zhen-hua1,2,LIU Ya-xing1,LIU Feng1,2,WANG Rui1,QIAN Cheng1,DU Jiang-cheng1 |
(1. National Engineering Research Center for Equipment and Technology of Cold Rolling Strip, Yanshan University,Qinhuangdao 066004, Hebei, China 2. State Key Laboratory of Metastable Materials Science and Technology,Yanshan University, Qinhuangdao 066004, Hebei, China) |
|
|
Abstract In allusion to the burr problem of strip edge tearing zone after cutting edge in finishing line,fully combined with the characteristics of the disc shear device and shearing process,by tracking a large number of field test and theory research,the edge grinding device of the steel strip in finishing mill was designed,which has proved to be effective after field application,and the device can solve the "burr" problem in the strip edge tear zone effectively,and improve the quality of products greatly under the premise of not changing the production equipment and process of finishing unit,which creates greater economic benefits for the unit with further popularization and application value.
|
Received: 28 April 2016
Published: 13 January 2017
|
|
|
|
[1] |
王训宏,李有元,王快社,等.80kg级TRIP钢带圆盘剪剪切工艺[J].轧钢,2009,26(03):71-72.(WANG Xun-hong, LI You-yuan, WANG Kuai-she, et al. Cutting Technology of Disc Shear for 80 kg Grade TRIP Steel Plate[J].Steel Rolling, 2009, 26(03):71-72.)
|
[1] |
王训宏,李有元,王快社,等.80kg级TRIP钢带圆盘剪剪切工艺[J].轧钢,2009,26(03):71-72.(WANG Xun-hong, LI You-yuan, WANG Kuai-she, et al. Cutting Technology of Disc Shear for 80 kg Grade TRIP Steel Plate[J].Steel Rolling, 2009, 26(03):71-72.)
|
[2] |
路家斌,李顺,阎秋生,等.圆盘剪分切过程硬质合金圆盘刀磨损及其对分切质量的影响[J].塑性工程学报,2014,21(6):117-123.(LU Jia-bin, LI Shun, YAN Qiu-sheng, et al.Wear of carbide alloy disc cutter and its effect on the slitting quality in the disc slitting process[J].Journal of Plasticity Engineering, 2014,21(6):117-123. )
|
[2] |
路家斌,李顺,阎秋生,等.圆盘剪分切过程硬质合金圆盘刀磨损及其对分切质量的影响[J].塑性工程学报,2014,21(6):117-123.(LU Jia-bin, LI Shun, YAN Qiu-sheng, et al.Wear of carbide alloy disc cutter and its effect on the slitting quality in the disc slitting process[J].Journal of Plasticity Engineering, 2014,21(6):117-123. )
|
[3] |
陈东文,黄贞益,郝震宇,等.圆盘剪剪切工艺优化研究[J] .轧钢,2015,32(2):90-95.(CHEN Dong-wen, HUANG Zhen-yi, HAO Zhen-yu, et al. Optimized research on disc shear shearing process[J]. Steel Rolling, 2015,32(2):90-95.)
|
[3] |
陈东文,黄贞益,郝震宇,等.圆盘剪剪切工艺优化研究[J] .轧钢,2015,32(2):90-95.(CHEN Dong-wen, HUANG Zhen-yi, HAO Zhen-yu, et al. Optimized research on disc shear shearing process[J]. Steel Rolling, 2015,32(2):90-95.)
|
[4] |
景群平,贾海亮,双远华,等.切边圆盘剪剪切过程的数值模拟和实验研究[J].塑性工程学报,2010,17(5):32-36.(JING Qun-ping, JIA H ai-liang , SH UANG Yuan-hua, et al. Numerical simulation and experimental study of the shearing process on trimming disc shear[J]. Journal of Plasticity Engineering, 2010,17(5):32-36.)
|
[4] |
景群平,贾海亮,双远华,等.切边圆盘剪剪切过程的数值模拟和实验研究[J].塑性工程学报,2010,17(5):32-36.(JING Qun-ping, JIA H ai-liang , SH UANG Yuan-hua, et al. Numerical simulation and experimental study of the shearing process on trimming disc shear[J]. Journal of Plasticity Engineering, 2010,17(5):32-36.)
|
[5] |
刘书浩,陈兵,杨竞.带钢剪切断面层次分布对剪切工艺影响探究[J].机械设计与制造,2012,(10):108-110.(LIU Shu-hao, CHEN Bing, YANG Jing. The Study of Strip Shearing Section Level Distribution of Shearing Process[J]. Machinery Design & Manufacture, 2012,(10):108-110.)
|
[5] |
刘书浩,陈兵,杨竞.带钢剪切断面层次分布对剪切工艺影响探究[J].机械设计与制造,2012,(10):108-110.(LIU Shu-hao, CHEN Bing, YANG Jing. The Study of Strip Shearing Section Level Distribution of Shearing Process[J]. Machinery Design & Manufacture, 2012,(10):108-110.)
|
[6] |
李芳春,徐政,任悦.板带钢无毛刺精密剪切的研究[J].鞍钢技术,1997,(11):46-49.(LI Fang-chun, XU Zheng, REN Yue. Study of Precision Shearing of Plate-Strip Steel without Barb[J]. Anshan Iron Steel Technology, 1997,(11):46-49.)
|
[6] |
李芳春,徐政,任悦.板带钢无毛刺精密剪切的研究[J].鞍钢技术,1997,(11):46-49.(LI Fang-chun, XU Zheng, REN Yue. Study of Precision Shearing of Plate-Strip Steel without Barb[J]. Anshan Iron Steel Technology, 1997,(11):46-49.)
|
[7] |
胡建军,周保欣,刘顺明.圆盘剪剪切原理及切边质量控制[J].重型机械,2012,(6):58-62.(HU Jian-jun,ZHOU Bao-xin,LIU Shun-ming.Shearing principle of double-side trimmer and control of shearing quality[J].Heavy Machinery,2012,(6):58-62.)
|
[7] |
胡建军,周保欣,刘顺明.圆盘剪剪切原理及切边质量控制[J].重型机械,2012,(6):58-62.(HU Jian-jun,ZHOU Bao-xin,LIU Shun-ming.Shearing principle of double-side trimmer and control of shearing quality[J].Heavy Machinery,2012,(6):58-62.)
|
[8] |
王骏.带钢压毛刺机结构评析[J].冶金设备,2003,(4):47-49.(WANG Jun. Analysis of the Structure of the Burr Masher for Strip Steel[J]. Metallurgical Equipment, 2003,(4):47-49.)
|
[8] |
王骏.带钢压毛刺机结构评析[J].冶金设备,2003,(4):47-49.(WANG Jun. Analysis of the Structure of the Burr Masher for Strip Steel[J]. Metallurgical Equipment, 2003,(4):47-49.)
|
[9] |
王世惠.圆盘剪自动控制的改进和完善[J].冶金自动化,2009,(2):60-62.(WANG Shi-hui. Improvement and perfection of automatic control system for disk shear[J]. Metallurgical Industry Automation, 2009,(2):60-62.)
|
[9] |
王世惠.圆盘剪自动控制的改进和完善[J].冶金自动化,2009,(2):60-62.(WANG Shi-hui. Improvement and perfection of automatic control system for disk shear[J]. Metallurgical Industry Automation, 2009,(2):60-62.)
|
[10] |
徐榴伶.一种用于连铸大方坯的在线去毛刺机[J].连铸,2016,41(1):56-58.(XU Liu-ling. An online deburring machine for bloom[J]. Continuous Casting, 2016,41(1):56-58.)
|
[10] |
徐榴伶.一种用于连铸大方坯的在线去毛刺机[J].连铸,2016,41(1):56-58.(XU Liu-ling. An online deburring machine for bloom[J]. Continuous Casting, 2016,41(1):56-58.)
|
[11] |
樊星辰,贾广顺,孙博,等.特厚板坯连铸机摆锤式去毛刺机结构优化改进[J].中国冶金,2014,24(12):41-43.(FAN Xing-chen, JIA Guang-shun, SUN Bo, et al. Design optimization and improvement of deburrer structure with hammers in extra-thick slab caster[J]. China Metallurgy, 2014 , 24(12):41-43.)
|
[11] |
樊星辰,贾广顺,孙博,等.特厚板坯连铸机摆锤式去毛刺机结构优化改进[J].中国冶金,2014,24(12):41-43.(FAN Xing-chen, JIA Guang-shun, SUN Bo, et al. Design optimization and improvement of deburrer structure with hammers in extra-thick slab caster[J]. China Metallurgy, 2014 , 24(12):41-43.)
|
[12] |
张敏,蔡志军.锤刀式毛刺机在板坯连铸机上的应用和故障处理[J].连铸,2012,(1):26-28.(ZHANG Min, CAI Zhi-jun. Application and Troubleshooting of Rotary Deburrer on Slab Caster[J]. Continuous Casting, 2012,(1):26-28.)
|
[12] |
张敏,蔡志军.锤刀式毛刺机在板坯连铸机上的应用和故障处理[J].连铸,2012,(1):26-28.(ZHANG Min, CAI Zhi-jun. Application and Troubleshooting of Rotary Deburrer on Slab Caster[J]. Continuous Casting, 2012,(1):26-28.)
|
[13] |
蔡志军,曹天明.马钢板坯连铸锤式旋转去毛刺机的应用[J].连铸,2009,(4):28-30.(CAI Zhi-jun , CAO Tian-ming. Application of Deburrer With Rotating Hammer in Slab Caster at Ma' anshan Steel[J]. Continuous Casting, 2009,(4):28-30.)
|
[13] |
蔡志军,曹天明.马钢板坯连铸锤式旋转去毛刺机的应用[J].连铸,2009,(4):28-30.(CAI Zhi-jun , CAO Tian-ming. Application of Deburrer With Rotating Hammer in Slab Caster at Ma' anshan Steel[J]. Continuous Casting, 2009,(4):28-30.)
|
[14] |
韩光燕,康华伟,栾贻忠.1500mm冷带切边圆盘剪的优化改造[J].轧钢,2012,29(2):70-72.(HAN Guang-yan, KANG Hua-wei, LUAN Yi-zhong. Optimization Reformation of Circular Shear for 1500mm Cold Rolled Strip[J]. Steel Rolling, 2012,29(2):70-72.)
|
[14] |
韩光燕,康华伟,栾贻忠.1500mm冷带切边圆盘剪的优化改造[J].轧钢,2012,29(2):70-72.(HAN Guang-yan, KANG Hua-wei, LUAN Yi-zhong. Optimization Reformation of Circular Shear for 1500mm Cold Rolled Strip[J]. Steel Rolling, 2012,29(2):70-72.)
|
[15] |
李生存.酸轧IF软钢切边技术研究与实践[J].钢铁,2014,49(12):85-89.(LI Sheng-cun. Research and Practice in Side Trimming Technology of IF Steel[J]. Iron and Steel, 2014,49(12):85-89.)
|
[15] |
李生存.酸轧IF软钢切边技术研究与实践[J].钢铁,2014,49(12):85-89.(LI Sheng-cun. Research and Practice in Side Trimming Technology of IF Steel[J]. Iron and Steel, 2014,49(12):85-89.)
|
[1] |
XU Liu-ling. An online deburring machine for bloom[J]. Chinese Journal of Iron and Steel, 2016, 41(1): 56-58. |
[2] |
LI Sheng-cun. Research and Practice in Side Trimming Technology of IF Steel[J]. Iron and Steel, 2014, 49(12): 85-89. |
[3] |
ZHANG Min,CAI Zhi-jun. Application and Troubleshooting of Rotary Deburrer on Slab Caster[J]. Chinese Journal of Iron and Steel, 2012, (1): 26-28. |
[4] |
JIA Bin. Improvement of Rolling-cut Double Side Trimming Shear’s Shearing Quality in Heavy Plate Mill of Baosteel Co., Ltd.[J]. Iron and Steel, 2009, 1(6): 0-0. |
[5] |
zhijun cai tianming cao. The Application of Deburrer with Rotating Hammer in Masteel Slab Caster[J]. Chinese Journal of Iron and Steel, 2009, 1(4): 28-30. |
|
|
|
|