|
|
Experiment on solidification and composition segregation of solidified mold flux film for peritectic steel continuous casting |
LONG Xiao,HE Sheng-ping,WANG Qian |
(College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China) |
|
|
Abstract The structure and property of mold flux films are critical factors for enhancing the quality of casting products and maintaining a stable running of casting. An improved water-cooled copper probe was adopted to obtain solid slag films with different probe immersion times. Optical microscopes and SEM were used to inspect the internal structure of films,SEM-EDX was adopted to measure the composition segregation within the film for deducing the composition change of liquid slag at solidification front. The result reveals that the major crystal forms in solid films are cuspidine and carnegieite,the precipitation of cuspidine changes the composition of liquid slag at the solidification front and promotes the precipitation of carnegieite,which leads to the rapid growing of solid slag film.
|
Received: 07 November 2016
Published: 04 May 2017
|
|
|
|
|
[1] |
迟景灏, 甘永年.连铸保护渣[M].沈阳:东北大学出版社, 1992:5.
|
[1] |
迟景灏, 甘永年.连铸保护渣[M].沈阳:东北大学出版社, 1992:5.
|
[2] |
S. Hiraki, K. Nakajima.Influence of mold heat fluxes on longitudinal surface cracks during high speed continuous casting of steel Slab[C]// 77th Steelmaking Conference Proceedings, Chicago: Iron & Steel Society,1994,397-403
|
[2] |
S. Hiraki, K. Nakajima.Influence of mold heat fluxes on longitudinal surface cracks during high speed continuous casting of steel Slab[C]// 77th Steelmaking Conference Proceedings, Chicago: Iron & Steel Society,1994,397-403
|
[3] |
H. Nakato, M. Ozawa, K. Kinoshita, Y. Habu.Nakato,MOzawa,K. Kinoshita,Y. Habu and T. Factors affecting the formation of shell and longitudinal cracks in mold during high-speed continuous casting of slabs[J].Trans. ISIJ, 1984, 24(11):957-965
|
[3] |
H. Nakato, M. Ozawa, K. Kinoshita, Y. Habu.Nakato,MOzawa,K. Kinoshita,Y. Habu and T. Factors affecting the formation of shell and longitudinal cracks in mold during high-speed continuous casting of slabs[J].Trans. ISIJ, 1984, 24(11):957-965
|
[4] |
曹磊.包晶钢连铸坯表面纵裂与保护渣性能选择[J].钢铁, 2015, 50(2):38-42
|
[4] |
曹磊.包晶钢连铸坯表面纵裂与保护渣性能选择[J].钢铁, 2015, 50(2):38-42
|
[5] |
朱礼龙, 何生平, 毛敬华, 赵和明, 韩志伟, 王谦.特厚板连铸保护渣系列规划[J].钢铁, 2016, 51(3):44-48
|
[5] |
朱礼龙, 何生平, 毛敬华, 赵和明, 韩志伟, 王谦.特厚板连铸保护渣系列规划[J].钢铁, 2016, 51(3):44-48
|
[6] |
赵紫锋, 王新华, 张炯明, 梅峰, 康建国.中碳钢板坯保护渣性能优化及提高拉速工业试验研究[J].钢铁, 2009, 44(3):24-27
|
[6] |
赵紫锋, 王新华, 张炯明, 梅峰, 康建国.中碳钢板坯保护渣性能优化及提高拉速工业试验研究[J].钢铁, 2009, 44(3):24-27
|
[7] |
X. Long, S. He, L. Zhu, T. Wu, Q. Wang.Effects of Crystallization of Mould Fluxes on Property of Liquid Slag Film and its Impact on Peritectic Steel Slab Continuous Casting[C]// 4th International Symposium on High Temperature Metallurgical Processing, San Antonio, America: Wiley, 2013,115.-162
|
[7] |
X. Long, S. He, L. Zhu, T. Wu, Q. Wang.Effects of Crystallization of Mould Fluxes on Property of Liquid Slag Film and its Impact on Peritectic Steel Slab Continuous Casting[C]// 4th International Symposium on High Temperature Metallurgical Processing, San Antonio, America: Wiley, 2013,115.-162
|
[8] |
H. Ryu, Z. Zhang, J. W. Cho, G. Wen and S. Sridhar.Crystallization behaviors of slags through a heat flux simulator[J].ISIJ International, 2010, 50(8):1142-1150
|
[8] |
H. Ryu, Z. Zhang, J. W. Cho, G. Wen and S. Sridhar.Crystallization behaviors of slags through a heat flux simulator[J].ISIJ International, 2010, 50(8):1142-1150
|
[9] |
K. Lara Santos Assis.Heat transfer through mold fluxes: a new approach to measure thermal properties of slags[D]//Pittsburgh,Carnegie Mellon University,2016.
|
[9] |
K. Lara Santos Assis.Heat transfer through mold fluxes: a new approach to measure thermal properties of slags[D]//Pittsburgh,Carnegie Mellon University,2016.
|
[10] |
联邦德国钢铁工程师协会.渣图集[M].北京:冶金工业出版社, 1989:125.
|
[10] |
联邦德国钢铁工程师协会.渣图集[M].北京:冶金工业出版社, 1989:125.
|
[1] |
LIU Ke, HAN Yi-hua, YANG Fan, ZHU Li-guang. Effect of MgO on microstructure of CaO-Al2O3 based quaternary system mold fluxes[J]. Iron and Steel, 2020, 55(5): 52-58. |
[2] |
zheng yuanshou. High speed production technology of 160 × 160mm2 continuous casting in SanGangsteel[J]. , 2020, 45(3): 0-0. |
[3] |
AI Ke-nan, ZHANG Pan-pan, ZHAO Meng-hao, LI Cheng-liang, ZHANG Zhi-ming, FU Jian-xun. Analysis of formation mechanism of surface crack of 1215 free-cutting steel during drawing[J]. Iron and Steel, 2020, 55(2): 88-94. |
[4] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
[5] |
. Development and Application of Mold Flux for Medium Carbon Steel in High Speed Thin Slab Continuous Casting[J]. , 2020, 45(1): 0-0. |
[6] |
HUANG Caide,HE Wenyuan,LIU Yanqiang,XIAO Maoyuan,. Effect of electromagnetic braking on flow field in #br#
tinplate under high casting speed[J]. Iron and Steel, 2019, 54(8): 90-101. |
|
|
|
|