镍基高温合金生产用原材料有害杂质的控制

doi:10.13228/j.boyuan.issn0449-749x.20170169

Abstract
Figure/Table
References
Related Citation (4)

Download: PDF (0 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract With increasing thrust-weight ratio and inlet temperature of turbine for the aircraft engine，higher comprehensive performance requirements are put forward for components operating in hot environment manufactured by premium Ni-based superalloy. The quality of high temperature alloy material depends on its chemical composition and structure. It is obligatory to strictly control the alloy composition and reduce the content of harmful elements firstly. Since the residual detrimental impurities such as Pb，Sn，As，Sb，Bi，Se，and O，N，S etc are difficult to remove through common refining technology in practice， the purity of superalloy products would greatly depends on purity of raw materials used in production. Along with improvement in equipment and technology of domestic alloy making enterprises，raw materials of high harmful impurity content has become the bottleneck，limiting stable production of premium Ni-based superalloy. Based on the analysis of sources of trace elements in primary raw materials used in production of superalloy，the approaches of quality control for raw materials are proposed including selecting superior ore resources，improving the level of extraction and refining，purifying scrap and spent alloy component and cleaning the raw materials before charging.

Received: 12 April 2017 Published: 07 September 2017

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIANG Zhou-Hua
	ZHANG Xin-Fa
	LIU Fu-Bin
	GONG Wei

Cite this article:

JIANG Zhou-Hua,ZHANG Xin-Fa,LIU Fu-Bin等. Harmful impurities control of raw material used in Ni-based superalloy production[J]. Iron and Steel, 2017, 52(9): 1-10.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20170169 OR http://www.chinamet.cn/Jweb_gt/EN/Y2017/V52/I9/1

[1]	师昌绪，仲增墉.中国高温合金五十年[M]. 北京：冶金工业出版社,2006
[1]	师昌绪，仲增墉.中国高温合金五十年[M]. 北京：冶金工业出版社,2006
[2]	冶军. 美国镍基高温合金[M]. 北京：科学出版社,1978
[2]	冶军. 美国镍基高温合金[M]. 北京：科学出版社,1978
[3]	黄乾尧，李汉康.高温合金[M]. 北京：冶金工业出版社，2000
[3]	黄乾尧，李汉康.高温合金[M]. 北京：冶金工业出版社，2000
[4]	殷克勤. 提高铸造高温合金及其精铸件纯洁度的途径[J]. 材料工程, 1999(7):47-48.
[4]	殷克勤. 提高铸造高温合金及其精铸件纯洁度的途径[J]. 材料工程, 1999(7):47-48.
[5]	C.E. Shamblen, D.R. Chang, J.A. Corrado. Superalloy melting and cleanliness evalution[A]. Supperalloys1984[C]. Warrendale:TMS,1984: 509-520
[5]	C.E. Shamblen, D.R. Chang, J.A. Corrado. Superalloy melting and cleanliness evalution[A]. Supperalloys1984[C]. Warrendale:TMS,1984: 509-520
[6]	B.B.谢多洛夫,全宏声. 铸造高温合金熔炼工艺中的冶金原则[J]. 航空材料学报, 1991(S1):6-13.
[6]	B.B.谢多洛夫,全宏声. 铸造高温合金熔炼工艺中的冶金原则[J]. 航空材料学报, 1991(S1):6-13.
[7]	傅杰. 必须重视我国特种熔炼技术的发展[J]. 钢铁研究学报, 1992, 4（S）：102-106.
[7]	傅杰. 必须重视我国特种熔炼技术的发展[J]. 钢铁研究学报, 1992, 4（S）：102-106.
[8]	桂忠楼,吴昌新,孙传棋, 航空用优质高温合金锭制造技术的研究[J].材料工程,2002,（3）：20
[8]	桂忠楼,吴昌新,孙传棋, 航空用优质高温合金锭制造技术的研究[J].材料工程,2002,（3）：20
[9]	牛建平，孙晓峰，金涛等. 高温合金的VIM超纯净熔炼[J]. 有色金属，2001，53（2）：62
[9]	牛建平，孙晓峰，金涛等. 高温合金的VIM超纯净熔炼[J]. 有色金属，2001，53（2）：62
[10]	尹志冬，戴斌煜，刘智彬等. 高温合金净化技术研究现状[J]. 铸造，2011,60（5）:462
[10]	尹志冬，戴斌煜，刘智彬等. 高温合金净化技术研究现状[J]. 铸造，2011,60（5）:462
[11]	Holt R T, Wallace W. Impurities and trace elements in nickel-base superalloys[J]. International Metals Reviews, 1975, 21(1):1-24.
[11]	Holt R T, Wallace W. Impurities and trace elements in nickel-base superalloys[J]. International Metals Reviews, 1975, 21(1):1-24.
[12]	R.Schlatter. Melting and refining technology of high-temperature steels and superalloys: a review of recent process developments[C]// 2. international conference on superalloys-processing, Champion, Pennsylvania, USA, 18 Sep 1972.
[12]	R.Schlatter. Melting and refining technology of high-temperature steels and superalloys: a review of recent process developments[C]// 2. international conference on superalloys-processing, Champion, Pennsylvania, USA, 18 Sep 1972.
[13]	Y. Mori, H. Ikegami.Trans. Iron Steel Inst. Japan, 1975, 15, 160
[13]	Y. Mori, H. Ikegami.Trans. Iron Steel Inst. Japan, 1975, 15, 160
[14]	Cao W D, Kennedy R L. New developments in wrought 718-type superalloys[J]. Acta Metallurgica Sinica（English letters）, 2005, 18(1):39-46.
[14]	Cao W D, Kennedy R L. New developments in wrought 718-type superalloys[J]. Acta Metallurgica Sinica（English letters）, 2005, 18(1):39-46.
[15]	郭建亭. 几种微量元素在高温合金中的作用与机理[J]. 中国有色金属学报, 2011, 21(3):465-475.
[15]	郭建亭. 几种微量元素在高温合金中的作用与机理[J]. 中国有色金属学报, 2011, 21(3):465-475.
[16]	Mitchell A. The production of high-quality materials by special melting processes[J]. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films, 1987, 5(4):2672-2677.
[16]	Mitchell A. The production of high-quality materials by special melting processes[J]. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films, 1987, 5(4):2672-2677.
[17]	Moshtaghi M. Effect of vacuum degree in VIM furnace on mechanical properties of Ni-Fe-Cr based alloy[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(9):136-140.
[17]	Moshtaghi M. Effect of vacuum degree in VIM furnace on mechanical properties of Ni-Fe-Cr based alloy[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(9):136-140.
[18]	Г. B. Назаров. “Ми TOM”，No.1.p.52-54,1973.
[18]	Г. B. Назаров. “Ми TOM”，No.1.p.52-54,1973.
[19]	王建明, 杨舒宇. 镍基铸造高温合金[M]. 冶金工业出版社, 2014.
[19]	王建明, 杨舒宇. 镍基铸造高温合金[M]. 冶金工业出版社, 2014.
[20]	V. M. Goldschmidt: 'Geochemistry'; 1954, Oxford, Oxford University Press.
[20]	V. M. Goldschmidt: 'Geochemistry'; 1954, Oxford, Oxford University Press.
[21]	Bromley AV, Parker RH. Sources of trace elements in primary raw materials used in production of superalloys[J]. Metals Technology, 1984, 11(1):419-427.
[21]	Bromley AV, Parker RH. Sources of trace elements in primary raw materials used in production of superalloys[J]. Metals Technology, 1984, 11(1):419-427.
[22]	行卫东, 范兴祥, 董海刚,等. 废旧高温合金再生技术及进展[J]. 稀有金属, 2013(3):494-500.
[22]	行卫东, 范兴祥, 董海刚,等. 废旧高温合金再生技术及进展[J]. 稀有金属, 2013(3):494-500.
[23]	冯瑞姝, 徐盛明. 难溶高熔点金属合金回收工艺研究进展[J]. 湿法冶金, 2012, 31(6).
[23]	冯瑞姝, 徐盛明. 难溶高熔点金属合金回收工艺研究进展[J]. 湿法冶金, 2012, 31(6).
[24]	张玉龙. 燃气轮机导向叶片合金返回料工程化应用研究[J]. 机械工程师, 2013(8):65-67.
[24]	张玉龙. 燃气轮机导向叶片合金返回料工程化应用研究[J]. 机械工程师, 2013(8):65-67.
[25]	M.C. Thomas. Meterials for advanced power engineering 1994[A],Proceeding of a conference held in liege[C], Belgium,1994:85
[25]	M.C. Thomas. Meterials for advanced power engineering 1994[A],Proceeding of a conference held in liege[C], Belgium,1994:85
[26]	M.C. Thomas, R.C. Helmink, D.J. Frasier, et al. Allison Manufacturing, Property and Turbine Engine Performance of CMSX-4? Single Crystal Airfoils, Kluwer Academic Publishers, 1994.
[26]	M.C. Thomas, R.C. Helmink, D.J. Frasier, et al. Allison Manufacturing, Property and Turbine Engine Performance of CMSX-4? Single Crystal Airfoils, Kluwer Academic Publishers, 1994.
[27]	D. A. FORD: Rolls-Royce Ltd, Bristol, personal communication,1983.
[27]	D. A. FORD: Rolls-Royce Ltd, Bristol, personal communication,1983.
[28]	N. ONO, S. ITASAKO, and I. FUKUI: in Proc. Int. Conf. 'Cobalt:metallurgy and uses', Brussels, Nov. 1981, Centred'Information des Metaux Non Ferreux.
[28]	N. ONO, S. ITASAKO, and I. FUKUI: in Proc. Int. Conf. 'Cobalt:metallurgy and uses', Brussels, Nov. 1981, Centred'Information des Metaux Non Ferreux.
[29]	Eng. Min. J., 1980, 181, (12), 62-68.
[29]	Eng. Min. J., 1980, 181, (12), 62-68.
[30]	A. H. SULLY: 'Chromium'; 1954, London, Butterworths.
[30]	A. H. SULLY: 'Chromium'; 1954, London, Butterworths.
[31]	阎江峰, 陈加希,胡亮. 铬冶金[M]．北京：冶金工业出版社，2007：254~274
[31]	阎江峰, 陈加希,胡亮. 铬冶金[M]．北京：冶金工业出版社，2007：254~274
[32]	R. R. DORFLER and J. M. LAFERTY: in 'Extractive metallurgy of refractory metals', (ed. H. Y. Sohn et al.), 1; 1981, New York, Metallurgical Society of IME.
[32]	R. R. DORFLER and J. M. LAFERTY: in 'Extractive metallurgy of refractory metals', (ed. H. Y. Sohn et al.), 1; 1981, New York, Metallurgical Society of IME.
[33]	O. K. MEHRA, D. K. BOSE, and C. K. GUPTA: Me tall. Trans.,1973,4,691-694
[33]	O. K. MEHRA, D. K. BOSE, and C. K. GUPTA: Me tall. Trans.,1973,4,691-694
[34]	K. GRJOTHEIM and B. J. WELCH: 'Aluminium smelter technology'; 1980, Diisseldorf, Aluminium-Verlag.
[34]	K. GRJOTHEIM and B. J. WELCH: 'Aluminium smelter technology'; 1980, Diisseldorf, Aluminium-Verlag.
[35]	Abiko K, Takaki S. Ultra-purification of iron by ultra-high vacuum melting[J]. Vacuum, 1999, 53(1–2):93-96.
[35]	Abiko K, Takaki S. Ultra-purification of iron by ultra-high vacuum melting[J]. Vacuum, 1999, 53(1–2):93-96.
[36]	Takaki S, Abiko K. Ultra-purification of iron by three types of melting furnaces constructed using ultra-high vacuum technology[J]. Vacuum, 1999, 53(1–2):97-100.
[36]	Takaki S, Abiko K. Ultra-purification of iron by three types of melting furnaces constructed using ultra-high vacuum technology[J]. Vacuum, 1999, 53(1–2):97-100.
[37]	Takaki S, Abiko K. Ultra-Purification of Electrolytic Iron by Cold-Crucible Induction Melting and Induction-Heating Floating-Zone Melting in Ultra-High Vacuum[J]. Materials Transactions Jim, 2000, 41(1):2-6.
[37]	Takaki S, Abiko K. Ultra-Purification of Electrolytic Iron by Cold-Crucible Induction Melting and Induction-Heating Floating-Zone Melting in Ultra-High Vacuum[J]. Materials Transactions Jim, 2000, 41(1):2-6.
[38]	Srivastava R R, Kim M S, Lee J C, et al. Resource recycling of superalloys and hydrometallurgical challenges[J]. Journal of Materials Science, 2014, 49(14):4671-4686.
[38]	Srivastava R R, Kim M S, Lee J C, et al. Resource recycling of superalloys and hydrometallurgical challenges[J]. Journal of Materials Science, 2014, 49(14):4671-4686.
[39]	Woulds M J. Recycling of Engine Serviced Superalloys[C]// Superalloys. 1980:31-41.
[39]	Woulds M J. Recycling of Engine Serviced Superalloys[C]// Superalloys. 1980:31-41.
[40]	Satya P V, Rao A S, Prakash U, et al. Recycling of Superalloy Scrap through Electro Slag Remelting[J]. Isij International, 1996, 36(12):1459-1464.
[40]	Satya P V, Rao A S, Prakash U, et al. Recycling of Superalloy Scrap through Electro Slag Remelting[J]. Isij International, 1996, 36(12):1459-1464.
[41]	张华霞, 吴昌新, 桂忠楼. 纯净化DZ125合金返回料研究[J]. 材料工程, 2009(08):68-70.
[41]	张华霞, 吴昌新, 桂忠楼. 纯净化DZ125合金返回料研究[J]. 材料工程, 2009(08):68-70.
[42]	张华霞, 孟宇, 桂忠楼. DD3单晶合金返回料净化技术研究[J]. 金属加工：热加工, 2010(17):70-72.
[42]	张华霞, 孟宇, 桂忠楼. DD3单晶合金返回料净化技术研究[J]. 金属加工：热加工, 2010(17):70-72.
[43]	周波, 赵明汉, 赵京晨. 返回炉料添加量对K4169合金力学性能的影响[J]. 钢铁研究学报, 2003, 15(z1):196-199.
[44]	满延林, 王宇飞, 杨刚,等. 返回次数对K4169合金组织及性能的影响[C]// 2011中国材料研讨会论文摘要集. 2011.
[43]	周波, 赵明汉, 赵京晨. 返回炉料添加量对K4169合金力学性能的影响[J]. 钢铁研究学报, 2003, 15(z1):196-199.
[45]	吴贤, 吴永谦, 孟晗琪. 高温合金废料回收处理技术现状[J]. 中国钼业, 2015, 39(01):8-11.
[44]	满延林, 王宇飞, 杨刚,等. 返回次数对K4169合金组织及性能的影响[C]// 2011中国材料研讨会论文摘要集. 2011.
[45]	吴贤, 吴永谦, 孟晗琪. 高温合金废料回收处理技术现状[J]. 中国钼业, 2015, 39(01):8-11.
[46]	Krynitz U, Olbrich A, Kummer W, et al. Method for the decomposition and recovery of metallic constituents from superalloys: US, US5776329[P]. 1998.
[46]	Krynitz U, Olbrich A, Kummer W, et al. Method for the decomposition and recovery of metallic constituents from superalloys: US, US5776329[P]. 1998.
[47]	Kim M S, Lee J C, Kim E Y, et al. Leaching of CMSX-4 Superalloy in Hydrochloric Acid Solutions[J]. 2010, 19(5).
[47]	Kim M S, Lee J C, Kim E Y, et al. Leaching of CMSX-4 Superalloy in Hydrochloric Acid Solutions[J]. 2010, 19(5).
[48]	Srivastava R R, Kim M S, Lee J C, et al. Resource recycling of superalloys and hydrometallurgical challenges[J]. Journal of Materials Science, 2014, 49(14):4671-4686.
[48]	Srivastava R R, Kim M S, Lee J C, et al. Resource recycling of superalloys and hydrometallurgical challenges[J]. Journal of Materials Science, 2014, 49(14):4671-4686.
[49]	牛建平.纯净钢及高温合金制备技术[M].北京：冶金工业出版社，2009:101-103
[49]	牛建平.纯净钢及高温合金制备技术[M].北京：冶金工业出版社，2009:101-103
[50]	张新法, 郝银贵, 姚丹丹. 感应炉爆发性喷溅和爆炸机理分析及安全对策[J]. 工业炉, 2015, 37(1) ：17-19
[50]	张新法, 郝银贵, 姚丹丹. 感应炉爆发性喷溅和爆炸机理分析及安全对策[J]. 工业炉, 2015, 37(1) ：17-19