|
|
Torsion fatigue characteristics and crackpropagation behavior of 15Cr14Co12Mo5Ni2 gear steel |
LI Xin-yu1,2,YANG Mao-sheng2,ZHOU Xiao-long1,GUO Jun1,2 |
(1. College of Material Science and Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan, China 2. Institute for Special Steel, Central Iron and Steel Research Institute, Beijing 100081,China) |
|
|
Abstract The crack propagation behavior oftorsion fatigue fracture and the relationship between inclusions size and torsion fatigue lifeof 15Cr14Co12Mo5Ni2 steel were researchedthroughtorsion fatigue test. Torsional fatigue limit strength and[τ-N]cure was obtained, and the value of 15Cr14Co12Mo5Ni2 steel was 350 MPa,whosedispersion was large. Through observed fractures,the surface failure mode and subsurface failure mode as the main failure mode of the test steel, and the fracture mainly resulting from oxide inclusions were found. Thefracture mechanics conditions of fatigue crack propagation of 15Cr14Co12Mo5Ni2 steel were analyzed by calculating stress strength factor[ΔK] and crack propagation threshold value[ΔKth.] The load process of test steel in fracture was: type II load,type I load,type II load, and type I+II load, which corresponded to crack sourcezone, fiber zone, fatigue crack propagation zone and instantaneous fracture zone. When the large crack formed, fiber zone would not appear, andthe load process was type II load, andtype I+II load. The relationship between the size of the inclusions and the torsional fatigue life of the 15Cr14Co12Mo5Ni2 steel was obtained by eliciting formulas and fitting dates. It wasfound that[τ-N]cure of the test steel moved toward the high life zone, andwhen the size of inclusion in crack initiation was less than 5 μm, torsional fatigue life of 15Cr14Co12Mo5Ni2 steel would be more than 107 cycles with 350 MPa stress.
|
Received: 23 February 2017
Published: 07 September 2017
|
|
|
|
[1] |
胡志忠,吴玉声等. 扭转疲劳断裂机制图[J]. 金属学报,1990,26(5):363.HU Zhi-zhong Fracture mechanism diagram of Torsional fatigue[J]. Acta Metallurgica Sinica,1990,26(5):363.
|
|
参考文献
|
[1] |
胡志忠,吴玉声等. 扭转疲劳断裂机制图[J]. 金属学报,1990,26(5):363.HU Zhi-zhong Fracture mechanism diagram of Torsional fatigue[J]. Acta Metallurgica Sinica,1990,26(5):363.
|
[2] |
Yoshinobu Shimamura,Koichiro Narita,et al. Fatigue properties of carburized alloy steel in very high cycle regime under torsional loading[J]. International Journal of Fatigue.2014,60(1):57.
|
[2] |
Yoshinobu Shimamura,Koichiro Narita,et al. Fatigue properties of carburized alloy steel in very high cycle regime under torsional loading[J]. International Journal of Fatigue.2014,60(1):57.
|
[3] |
Y Murakami,M Endo. Effects of defects, inclusions and inhomogeneities on fatigue strength [J]. International Journal of Fatigue.1994,16(3):163.
|
[3] |
Y Murakami,M Endo. Effects of defects, inclusions and inhomogeneities on fatigue strength [J]. International Journal of Fatigue.1994,16(3):163.
|
[4] |
Pekko Juvonen. Effects of non-metallic inclusions on fatigue properties of calcium treated steels[D]. Finland: Helsinki University of Technology,2004.
|
[4] |
Pekko Juvonen. Effects of non-metallic inclusions on fatigue properties of calcium treated steels[D]. Finland: Helsinki University of Technology,2004.
|
[5] |
张安哥,朱成九,陈梦成. 疲劳、断裂和损伤[M]. 成都:西南交通大学出版社,2006:53.ZHANG An-ge, ZHU Cheng-jiu, CHEN Meng-cheng. Fatigue, fracture and abrasion[M]. Chengdu: Southwest Jiaotong University Press, 2006: 53.
|
[5] |
张安哥,朱成九,陈梦成. 疲劳、断裂和损伤[M]. 成都:西南交通大学出版社,2006:53.ZHANG An-ge, ZHU Cheng-jiu, CHEN Meng-cheng. Fatigue, fracture and abrasion[M]. Chengdu: Southwest Jiaotong University Press, 2006: 53.
|
[6] |
K. Tanaka. Crack initiation and propagation in torsional fatigue of circumferentiallynotched steel bars[J]. International Journal of Fatigue. 2014,58(58):114
|
[6] |
K. Tanaka. Crack initiation and propagation in torsional fatigue of circumferentiallynotched steel bars[J]. International Journal of Fatigue. 2014,58(58):114
|
[7] |
Zhen XiuLin. Fatigue crack propagation in steels[J]. Engineering Fracture mechanics,1983,18(5):965
|
[7] |
Zhen XiuLin. Fatigue crack propagation in steels[J]. Engineering Fracture mechanics,1983,18(5):965
|
[8] |
Ling Chao,Zheng Xiulin. A New Method for Predicting Fatigue Crack Propagation Threshold [J].Journal of Mechanical Strength. 1989,2005(4):124
|
[8] |
Ling Chao,Zheng Xiulin. A New Method for Predicting Fatigue Crack Propagation Threshold [J].Journal of Mechanical Strength. 1989,2005(4):124
|
[9] |
Y Murakami. Inclusion Rating by Statistics of Extreme Values and Its Application to Fatigue Strength Prediction and Quality Control of Materials[J].International Journal of Fatigue. 1996, 18(3):215
|
[9] |
Y Murakami. Inclusion Rating by Statistics of Extreme Values and Its Application to Fatigue Strength Prediction and Quality Control of Materials[J].International Journal of Fatigue. 1996, 18(3):215
|
[10] |
王自强,陈少华. 高等断裂力学[M]. 北京:科学出版社,2009:214.WANG Zi-qiang, CHEN Shao-hua. Advanced Fracture Mechanics[M]. Beijing: Science Press, 2009:214.
|
[10] |
王自强,陈少华. 高等断裂力学[M]. 北京:科学出版社,2009:214.WANG Zi-qiang, CHEN Shao-hua. Advanced Fracture Mechanics[M]. Beijing: Science Press, 2009:214.
|
[11] |
褚武杨. 断裂力学基础[M]. 北京:科学出版社,1979:267.ZHU Wu-yang. Fracture mechanics foundation[M]. Beijing: Science Press, 1979:267.
|
[11] |
褚武杨. 断裂力学基础[M]. 北京:科学出版社,1979:267.ZHU Wu-yang. Fracture mechanics foundation[M]. Beijing: Science Press, 1979:267.
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[4] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
[5] |
QIN Zheng-feng, XUE Zheng-liang, LI Jin-bo, LI Bo-si. Origin of large spherical or bar-shaped inclusions in calcium treated steel[J]. Iron and Steel, 2020, 55(5): 31-38. |
[6] |
WANG Yi, ZHANG Li-feng, REN Ying, REN Qiang. Mechanism of inclusion evolution during refining process of 37Mn5 steel production[J]. Iron and Steel, 2020, 55(5): 39-44. |
|
|
|
|