|
|
Bending fatigue crack initiation and propagation behaviors of a nickel free high nitrogen stainless steel |
ZHANG Hui-fang,XIAO Zhen-xing,ZHOU Yu,QIAN Li-hua,WANG Wei,[LU]Zhi-qing |
(Key Laboratory of Advanced Forging and Stamping Technology and Science, Ministry of Education,Yanshan University, Qinhuangdao 066004, Hebei, China) |
|
|
Abstract Using four-point bending fatigue test studied the fatigue behavior of nickel free high nitrogen stainless steel in different stress levels, and the micro morphology, initiation position and propagation trace of fatigue crack were analyzed. The fracture of experimental steel was multiple cracks, and the total crack length increased gradually with the increase of stress level. The crack length tends to be stable when the stress level was close to the yield limit of the material. Most of the cracks initiated at the slip zone, and the crack were distorted, migrated and bifurcated in the process of crack propagation. The crack propagated mainly along single slip band or multiple slip bands in the grain and deflected when crack crossed the grain boundary or twin boundary.
|
Received: 05 April 2017
Published: 29 September 2017
|
|
|
|
[1] |
SUN Deng-yue, HOU Hai-tao, RU Wen-di, XU Shi-min. Design of multi-point flexible pressure straightening device for wide and heavy plates and calculation of reverse bending amount[J]. Iron and Steel, 2020, 55(6): 113-117. |
[2] |
XING Xian-qiang, CAO Wen-quan, WANG Cun-yu. Bond structure of 55SiCr steel used for coil springs of automotive suspension system[J]. Iron and Steel, 2020, 55(3): 68-73. |
[3] |
GUAN Zhen, SUN Yong-qing, LI Li, TIAN Shuai, LIU Zhen-bao, LIANG Jian-xiong. Effects of smelting process on fatigue performance of 15-5PH stainless steel[J]. Iron and Steel, 2020, 55(1): 72-80. |
[4] |
LIU Yu, XUE Jian-zhi, XIE Xin-liang. Early fracture analysis of bench fatigue test for automobile front axle[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(1): 44-. |
[5] |
GAO Cairu,PAN Huan,QIU Chunlin,LI Changsheng,LIN Fengkun. FEM simulation of inner void defects in plastic die steel during upsetting process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(6): 547-552. |
[6] |
GAO Zhi-yu1, FAN Xian-jin1, DOU Chun-yue1, ZHANG Xu1, PAN Tao2. Simulation analysis on transfer law of deformation in thickness direction of ultra-heavy plate[J]. Iron and Steel, 2019, 54(4): 49-54,62. |
|
|
|
|