|
|
Rolling force model of longitude profile LP plate based on E Orowan differential equation |
SUN Jing-na,CHEN Chi,HUANG Hua-gui,ZHANG Cai-yun,WANG Shuo |
(National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,Yanshan University, Qinhuangdao 066004, Hebei, China) |
|
|
Abstract The analysis of rolling force of longitude profile LP plate which is a considerable product in steel rolling reduction can provide theoretical basis for optimizing the forming process and predicting product performance. Based on E Orowan mathematical model and shear friction,the stress expression in each deformation zone of the longitude profile LP plate was derived. The change rule of the rolling force in the deformation zone was observed by the variations of rolling parameters. The results are as follows:the inlet positions of cladded longitude profile rolling and the rolling force peak are related to rolling reduction while the outlet position is determined by the rolling wedge angle. The rolling force peak and the deformation zone size reduce with the increase of wedge angle and time in the upwards rolling. Conversely, the rolling force peak and the deformation zone size raise with the increase of wedge angle and time in the downwards rolling.
|
Received: 21 April 2017
Published: 14 November 2017
|
|
|
|
|
[1] |
王国栋,刘相华,吴迪.节约型钢铁材料及其减量化加工制造[J].轧钢, 2006, 23(2):1-5
|
[1] |
王国栋,刘相华,吴迪.节约型钢铁材料及其减量化加工制造[J].轧钢, 2006, 23(2):1-5
|
[2] |
Fukumoto Y, Nagai M.steel bridges: new steels and innovative erection methods.[J].Progress in Structural Engineering and materials, 2000, 2(1):34-40
|
[2] |
Fukumoto Y, Nagai M.steel bridges: new steels and innovative erection methods.[J].Progress in Structural Engineering and materials, 2000, 2(1):34-40
|
[3] |
Shinichi S, Ryuji M, Tadashi O, et.al.Steel Products for Shipbuilding.[J].JFE Technical Report, 2004, (2):41-48
|
[3] |
Shinichi S, Ryuji M, Tadashi O, et.al.Steel Products for Shipbuilding.[J].JFE Technical Report, 2004, (2):41-48
|
[4] |
张广基, 刘相华, 胡贤磊等.变厚度轧制轧件水平速度变化规律[J].东北大学学报自然科学版, 2013, 34(1):75-79
|
[4] |
张广基, 刘相华, 胡贤磊等.变厚度轧制轧件水平速度变化规律[J].东北大学学报自然科学版, 2013, 34(1):75-79
|
[5] |
刘相华, 张广基.变厚度轧制过程力平衡微分方程[J].钢铁研究学报, 2012, 24(4):10-14
|
[5] |
刘相华, 张广基.变厚度轧制过程力平衡微分方程[J].钢铁研究学报, 2012, 24(4):10-14
|
[6] |
刘相华, 张广基, 支颖.变厚度轧制时质量守恒的表述方式[J].科学通报, 2013, 58(13):1769-1774
|
[6] |
刘相华, 张广基, 支颖.变厚度轧制时质量守恒的表述方式[J].科学通报, 2013, 58(13):1769-1774
|
[7] |
余伟, 孙广杰.薄板变厚度轧制中前滑理论模型和数值模拟[J].北京科技大学学报, 2014, 36(2):241-245
|
[7] |
余伟, 孙广杰.薄板变厚度轧制中前滑理论模型和数值模拟[J].北京科技大学学报, 2014, 36(2):241-245
|
[8] |
王军生,矫志杰,赵启林,等.冷连轧动态变规格辊缝动态设定原理与应用[J].钢铁研究学报, 2001, 36(10):39-42
|
[8] |
王军生,矫志杰,赵启林,等.冷连轧动态变规格辊缝动态设定原理与应用[J].钢铁研究学报, 2001, 36(10):39-42
|
[9] |
王军生, 赵启林, 矫志杰, 等.冷连轧动态变规格轧辊速度的动态设定[J].钢铁研究学报, 2002, 14(2):18-21
|
[9] |
王军生, 赵启林, 矫志杰, 等.冷连轧动态变规格轧辊速度的动态设定[J].钢铁研究学报, 2002, 14(2):18-21
|
[10] |
杜平, 胡贤磊, 王君, 等.变截面轧制过程的多点动态设定[J].钢铁研究学报, 2009, 21(11):27-30
|
[10] |
杜平, 胡贤磊, 王君, 等.变截面轧制过程的多点动态设定[J].钢铁研究学报, 2009, 21(11):27-30
|
[11] |
张小平, 秦建平.轧制理论[M]北京:冶金工业出版社, 2006:54-58.
|
[11] |
张小平, 秦建平.轧制理论[M]北京:冶金工业出版社, 2006:54-58.
|
[1] |
BAI Zhen-hua1,2, XU Ji-shuan1, DONG Hang-zhe1, SHEN Li-tao1. Roller roughness attenuation model in leveling rolling process[J]. Iron and Steel, 2019, 54(4): 43-48. |
[2] |
BAI Zhen-hua,,WANG Song-yao,CUI Ya-ya,ZHAO Wei-quan,LIU Shuo-yang. Optimization technology of relationship graph between flow rate of emulsion and rolling speed[J]. Iron and Steel, 2017, 52(7): 58-63. |
[3] |
CHAI Xiao-jun,LI Hong-bo,ZHANG Jie,ZHOU Yi-zhong, MA Heng-hao,ZHANG Peng-wu. Transverse distribution law of rolling force and its prediction model in hot rolling[J]. Iron and Steel, 2017, 52(6): 52-60. |
[4] |
LIU Xiang-hua,ZHANG Guang-ji. Force Equilibrium Differential Equations for Variable Gauge Rolling[J]. Chinese Journal of Iron and Steel, 2012, 24(04): 10-13. |
[5] |
WANG Liansheng,YANG Quan,HE Anrui,WANG Xiaochen,LIU Tianwu. Thickness and Transverse Distribution of Roll Pressure for HotRolled Wide Strip[J]. Iron and Steel, 2011, 46(6): 55-59. |
[6] |
BAI Zhenhua;KANG Xiaopeng;LONG Ruibing;WU Shouming. Practical Temper Rolling Force Model and It’s Self Study Technology[J]. Iron and Steel, 2008, 43(10): 51-0. |
|
|
|
|