|
|
Experiment on distribution characteristics of surface inclusions in IF steel continuous casting billet |
ZHAO Cheng-lin1,2,TANG Fu-ping3,ZHU Xiao-lei1,2,LIAO Xiang-wei1,2,CHEN Dong2 |
(1. State Key Laboratory of Marine Equipment Made of Metal Material and Application, Anshan 114009, Liaoning,China 2. Iron and Steel Research Institutes of Ansteel Group, Anshan 114009, Liaoning, China 3. Ansteel Group Corporation, Anshan 114009, Liaoning, China) |
|
|
Abstract Inclusions are important factors that affect the surface quality of IF steel. It is significant to determine the optimum cleaning depth of continuous casting billet in different states when the IF steel continuous casting slab is cleaned on-line flame automatically. The second pouring piece of slab,the steady casting billet and the transfer billet between head and second cans of IF steel was dealed with. A total of 28 analytical samples are equidistance divided along with the width direction of the inner and outer surfaces of the each casting,and the size of each specimen is 29 mm×21 mm×30 mm. The changes of morphology,quantity and maximum size of inclusions under different cleaning depth are studied. The results show that the number of inclusions which is 20-50 μm in the second piece of slab is decreased with the increase of the cleaning capacity,the number of inclusions which is larger than 50 μm is slightly increased,and the number of inclusions which is larger than 20 μm in the steady state and the transfer billet is slightly reduced. When the surface of the slab is not cleaned,the maximum inclusions on the surface of the three slabs are 500,200 and 200 μm respectively. If the critical dimension of the inclusions affecting the surface quality of the steel plate is 100 μm,the second slab cleaning depth should be 4-5 mm,the steady casting billet and the transfer billet should be 2 mm.
|
Received: 19 May 2017
Published: 21 December 2017
|
|
|
|
[1] |
唐萍,李玉林,贾成橙,等.钢铸坯表层大型夹杂物分布及来源研究[J].炼钢, 2016, 32(4):73-78
|
[1] |
唐萍,李玉林,贾成橙,等.钢铸坯表层大型夹杂物分布及来源研究[J].炼钢, 2016, 32(4):73-78
|
[2] |
田恩华,崔衡,尤大利,等.钢铸坯表层洁净度研究[J].炼钢, 2014, 30(1):59-62
|
[2] |
田恩华,崔衡,尤大利,等.钢铸坯表层洁净度研究[J].炼钢, 2014, 30(1):59-62
|
[3] |
韩俊,陈涛.火焰清理机在板坯连铸生产中的应用[J].连铸,2012(3):38-41.[J].连铸, 2012, (2):38-41
|
[3] |
韩俊,陈涛.火焰清理机在板坯连铸生产中的应用[J].连铸,2012(3):38-41.[J].连铸, 2012, (2):38-41
|
[4] |
黄俊,许东利,王莉,等.钢镀锌板表面夹杂物缺陷分析与控制[J].炼钢, 2014, 30(2):26-29
|
[4] |
黄俊,许东利,王莉,等.钢镀锌板表面夹杂物缺陷分析与控制[J].炼钢, 2014, 30(2):26-29
|
[5] |
常桂华,张维维,赵成林,等.超低碳钢中最大夹杂物尺寸预测方法[J].鞍钢技术,2015(4):20-22.[J].鞍钢技术, 2015, (4):20-22
|
[5] |
常桂华,张维维,赵成林,等.超低碳钢中最大夹杂物尺寸预测方法[J].鞍钢技术,2015(4):20-22.[J].鞍钢技术, 2015, (4):20-22
|
[6] |
王新华.高品质冷轧薄板钢中非金属夹杂物控制技术[J].钢铁, 2013, 48(9):1-8
|
[6] |
王新华.高品质冷轧薄板钢中非金属夹杂物控制技术[J].钢铁, 2013, 48(9):1-8
|
[1] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[2] |
ZHU Tan-hua, ZHOU Qiu-yue, REN Ying, DUAN Hao-jian, ZHANG Li-feng. Inclusion evolution in IF steel during tundish reoxidation[J]. Iron and Steel, 2020, 55(3): 35-39. |
[3] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
[4] |
LAN Peng, TIE Zhan-peng, ZHANG Wei, MIAO Hong-sheng, YAN Qing-zhong, ZHANG Jia-quan. Research progress on spot segregation defects in continuously cast semi-products[J]. Iron and Steel, 2020, 55(2): 11-22. |
[5] |
YANG Jie1,YAO Hai-ming2,WU Zhen-gang1,GAO Qian-yun2. Clogging control of submerged entry nozzle during IF steelproduction by middle-thin slab process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(1): 20-26. |
[6] |
XIE shizheng. Effect of roller EMS on macrostructure and properties of high strength steel[J]. , 2020, 45(1): 0-0. |
|
|
|
|