[1] |
李超.我国城市固体废弃物污染及治理状况[J].现代农业科技, 2012, (7):283-289
|
[1] |
李超.我国城市固体废弃物污染及治理状况[J].现代农业科技, 2012, (7):283-289
|
[2] |
朱雪梅,黄启飞,王琪,等.固体废物水泥窑共处置技术应用及存在问题[C]. 2006.
|
[2] |
朱雪梅,黄启飞,王琪,等.固体废物水泥窑共处置技术应用及存在问题[C]. 2006.
|
[3] |
龙世刚,曹枫,孟庆民,等.高炉喷吹废塑料的研究[J]. 钢铁. 2005, 40(9): 13-15.
|
[3] |
龙世刚,曹枫,孟庆民,等.高炉喷吹废塑料的研究[J]. 钢铁. 2005, 40(9): 13-15.
|
[4] |
魏国侠,刘汉桥,蔡九菊.冶金技术在城市固体废弃物处理中的应用前景[J]. 工业炉. 2009, 31(1): 33-37.
|
[4] |
魏国侠,刘汉桥,蔡九菊.冶金技术在城市固体废弃物处理中的应用前景[J]. 工业炉. 2009, 31(1): 33-37.
|
[5] |
赵娟,崔怡.高炉喷吹塑料废弃物技术研究进展[J]. 青岛理工大学学报. 2007(04): 62-64.
|
[5] |
赵娟,崔怡.高炉喷吹塑料废弃物技术研究进展[J]. 青岛理工大学学报. 2007(04): 62-64.
|
[6] |
任山,郁庆瑶,龙世刚.高炉喷吹废轮胎的可行性分析[J]. 中国冶金. 2008(06): 40-43.
|
[6] |
任山,郁庆瑶,龙世刚.高炉喷吹废轮胎的可行性分析[J]. 中国冶金. 2008(06): 40-43.
|
[7] |
王允飞,于文吉,吉发.废弃木质材料循环利用现状及前景分析[J]. 中国人造板. 2010, 17(4): 1-4.
|
[7] |
王允飞,于文吉,吉发.废弃木质材料循环利用现状及前景分析[J]. 中国人造板. 2010, 17(4): 1-4.
|
[8] |
文心.我国目前废纸回收利用率不足30%[J]. 造纸化学品. 2015(5): 24.
|
[8] |
文心.我国目前废纸回收利用率不足30%[J]. 造纸化学品. 2015(5): 24.
|
[9] |
闫凯.餐厨废弃物-燃料乙醇生物转化研究[D]. 暨南大学, 2013.
|
[9] |
闫凯.餐厨废弃物-燃料乙醇生物转化研究[D]. 暨南大学, 2013.
|
[10] |
魏松民.城市垃圾可燃废弃物高炉处理技术研究[D]. 北京工业大学, 2006.
|
[10] |
魏松民.城市垃圾可燃废弃物高炉处理技术研究[D]. 北京工业大学, 2006.
|
[11] |
张力,冉景煜.城市固态生活垃圾的工业分析与热解特性[J]. 环境保护科学. 2000, 26(4): 17-20.
|
[11] |
张力,冉景煜.城市固态生活垃圾的工业分析与热解特性[J]. 环境保护科学. 2000, 26(4): 17-20.
|
[12] |
戴贤明.废轮胎热解过程及产物特性试验研究[D]. 华中科技大学, 2009.
|
[12] |
戴贤明.废轮胎热解过程及产物特性试验研究[D]. 华中科技大学, 2009.
|
[13] |
Wei R, Zhang L, Cang D, et al.Current status and potential of biomass utilization in ferrous metallurgical industry[J]. Renewable and Sustainable Energy Reviews. 2017, 68: 511-524.
|
[13] |
Wei R, Zhang L, Cang D, et al.Current status and potential of biomass utilization in ferrous metallurgical industry[J]. Renewable and Sustainable Energy Reviews. 2017, 68: 511-524.
|
[14] |
金桃,颜炯,Bottlinger Michael,等.餐厨垃圾制生物煤试验初探[J]. 可再生能源. 2014, 32(4): 505-511.
|
[14] |
金桃,颜炯,Bottlinger Michael,等.餐厨垃圾制生物煤试验初探[J]. 可再生能源. 2014, 32(4): 505-511.
|
[15] |
任山,龙世刚.三种可燃固体废弃物及煤粉的热重分析[J]. 安徽工业大学学报(自然科学版). 2009(03): 229-231.
|
[15] |
任山,龙世刚.三种可燃固体废弃物及煤粉的热重分析[J]. 安徽工业大学学报(自然科学版). 2009(03): 229-231.
|
[16] |
刘亮,邬海明,欧凤林,等.脱脂餐厨垃圾燃烧特性及几种动力学模型结果比较[J]. 湖北大学学报(自然科学版). 2015(02): 97-102.
|
[16] |
刘亮,邬海明,欧凤林,等.脱脂餐厨垃圾燃烧特性及几种动力学模型结果比较[J]. 湖北大学学报(自然科学版). 2015(02): 97-102.
|
[17] |
唐赛珍.我国塑料废弃物资源化现状及前景[J]. 新材料产业. 2011(10): 62-67.
|
[17] |
唐赛珍.我国塑料废弃物资源化现状及前景[J]. 新材料产业. 2011(10): 62-67.
|
[18] |
杨小娟,王小雷.初探国内外废旧服装回收再利用发展现状[J]. 山东纺织经济. 2013(7): 11-13.
|
[18] |
杨小娟,王小雷.初探国内外废旧服装回收再利用发展现状[J]. 山东纺织经济. 2013(7): 11-13.
|
[19] |
王珊珊,孙芳利,段新芳,等.废弃木质材料的循环利用技术及我国未来的研究重点[J]. 西北林学院学报. 2005, 20(2): 183-185.
|
[19] |
王珊珊,孙芳利,段新芳,等.废弃木质材料的循环利用技术及我国未来的研究重点[J]. 西北林学院学报. 2005, 20(2): 183-185.
|
[20] |
孙军.木废料资源及其作为能源利用的前景[J]. 可再生能源. 2002(05): 8-11.
|
[20] |
孙军.木废料资源及其作为能源利用的前景[J]. 可再生能源. 2002(05): 8-11.
|
[21] |
王向会,李广魏,孟虹,等.国内外餐厨垃圾处理状况概述[J]. 环境卫生工程. 2005, 13(2): 41-43.
|
[21] |
王向会,李广魏,孟虹,等.国内外餐厨垃圾处理状况概述[J]. 环境卫生工程. 2005, 13(2): 41-43.
|
[22] |
Janz J, Weiss W.Injection of waste plastics into the blast furnace of Stahlwerke Bremen[J]. Metallurgical Research & Technology. 1996, 100(3): 271-279.
|
[22] |
Janz J, Weiss W.Injection of waste plastics into the blast furnace of Stahlwerke Bremen[J]. Metallurgical Research & Technology. 1996, 100(3): 271-279.
|
[23] |
龙世刚,冯新华,庞建明,等.高炉喷吹废塑料堵枪模拟[J]. 钢铁研究学报. 2009, 21(3): 8-10.
|
[23] |
龙世刚,冯新华,庞建明,等.高炉喷吹废塑料堵枪模拟[J]. 钢铁研究学报. 2009, 21(3): 8-10.
|
[24] |
张崇民,王文忠.废弃塑料处理概况及其冶金原料化的探讨[C]. 2002.
|
[24] |
张崇民,王文忠.废弃塑料处理概况及其冶金原料化的探讨[C]. 2002.
|
[25] |
吴复忠,李军旗,金会心.喷吹煤与废塑料时矿石的还原粉化性能[J]. 钢铁研究学报. 2010(04): 5-8.
|
[25] |
吴复忠,李军旗,金会心.喷吹煤与废塑料时矿石的还原粉化性能[J]. 钢铁研究学报. 2010(04): 5-8.
|
[26] |
黄志甲,孙浩,丁晓,等.高炉喷吹废塑料技术的环境效益分析[C]. 2009.
|
[26] |
黄志甲,孙浩,丁晓,等.高炉喷吹废塑料技术的环境效益分析[C]. 2009.
|
[27] |
Li X G, Ma B G, Xu L, et al.Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres[J]. Thermochimica Acta. 2006, 441(1): 79-83.
|
[27] |
Li X G, Ma B G, Xu L, et al.Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres[J]. Thermochimica Acta. 2006, 441(1): 79-83.
|
[28] |
Williams P T, Brindle A J.Temperature selective condensation of tyre pyrolysis oils to maximise the recovery of single ring aromatic compounds ☆ ☆[J]. Fuel. 2003, 82(9): 1023-1031.
|
[28] |
Williams P T, Brindle A J.Temperature selective condensation of tyre pyrolysis oils to maximise the recovery of single ring aromatic compounds ☆ ☆[J]. Fuel. 2003, 82(9): 1023-1031.
|
[29] |
顾明言,刘旭辉,董红岩.高炉混合喷吹煤粉与废旧轮胎的数值模拟[C]. 2009.
|
[29] |
顾明言,刘旭辉,董红岩.高炉混合喷吹煤粉与废旧轮胎的数值模拟[C]. 2009.
|
[30] |
黄欢,韩枫,李烁,等.高炉喷吹废轮胎置换比的影响因素[J]. 钢铁研究. 2015, 43(5): 1-3.
|
[30] |
黄欢,韩枫,李烁,等.高炉喷吹废轮胎置换比的影响因素[J]. 钢铁研究. 2015, 43(5): 1-3.
|
[31] |
Machado J G M S, Osório E, Vilela A C F, et al.Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces[J]. Steel Research International. 2010, 81(1): 9-16.
|
[31] |
Machado J G M S, Osório E, Vilela A C F, et al.Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces[J]. Steel Research International. 2010, 81(1): 9-16.
|
[32] |
Babich A, Senk D, Fernandez M.Charcoal Behaviour by Its Injection into the Modern Blast Furnace[J]. Isij International. 2010, 50(1): 81-88.
|
[32] |
Babich A, Senk D, Fernandez M.Charcoal Behaviour by Its Injection into the Modern Blast Furnace[J]. Isij International. 2010, 50(1): 81-88.
|
[33] |
Ng K W, Giroux L, Macphee T, et al.Combustibility of charcoal for direct injection in blast furnace ironmaking[J]. Iron and Steel Technology. 2012, 9(3): 90-98.
|
[33] |
Ng K W, Giroux L, Macphee T, et al.Combustibility of charcoal for direct injection in blast furnace ironmaking[J]. Iron and Steel Technology. 2012, 9(3): 90-98.
|
[34] |
Mathieson J G, Rogers H, Somerville M, et al.Use of biomass in the iron and steel industry–an Australian perspective[Z]. Düsseldorf, Germany: 2011.
|
[34] |
Mathieson J G, Rogers H, Somerville M, et al.Use of biomass in the iron and steel industry–an Australian perspective[Z]. Düsseldorf, Germany: 2011.
|