|
|
Experimental research on sintering flue gas swirl atomization desulfurization and dust integration |
LIU Ding-ping,YUAN Dan-jue |
(School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China) |
|
|
Abstract Aiming at ultra-clean emission requirements for sintering flue gas in iron and steel enterprises,the problems encountered in the process of sintering flue gas desulfurization and dusting were analyzed and swirl atomization desulfurization and dust integration technology was put forward. By constructing a spray tangential swirl field,desulfurization efficiency and dust removal efficiency of a desulfurization tower improved under the influence of turbulent flow,atomization and condensation. The three-day transformation test of a 2×90 m2 sintering unit desulfurization tower was carried out. The test results show that adopting swirl atomizing technology,although the inlet flue gas flow rate,inlet flue gas temperature,inlet SO2 concentration fluctuate sharply,the outlet SO2 concentration can be stabilized below 30 mg/m3 and the desulfurization efficiency can reach as high as 99.22% after reformation. When the inlet dust concentration is 50 mg/m3 and without adding a wet electrostatic precipitator,the outlet dust concentration can be stabilized below 8 mg/m3,the dust removal efficiency can reach as high as 94.3% after reformation,achieving ultra-clean emission of sintering flue gas.
|
Received: 07 February 2018
Published: 24 August 2018
|
|
|
|
[1] |
中华人民共和国环境保护部.中国环境统计年报[J].中国环境科学出版社, 2015, :-
|
[1] |
中华人民共和国环境保护部.中国环境统计年报[J].中国环境科学出版社, 2015, :-
|
[2] |
李艳青, 闫志华, 栾雪娜.国内外烧结烟气脱硫现状及发展趋势[J].莱钢科技, 2009, (04):4-8
|
[2] |
李艳青, 闫志华, 栾雪娜.国内外烧结烟气脱硫现状及发展趋势[J].莱钢科技, 2009, (04):4-8
|
[3] |
Iino Y, Soma F, Hashimoto K.Environmental technologies in steel works[J].Jfe Technical Report, 2006, (8):7-16
|
[3] |
Iino Y, Soma F, Hashimoto K.Environmental technologies in steel works[J].Jfe Technical Report, 2006, (8):7-16
|
[4] |
Wang S P, Bi X G, Weng D M.Study on a New Technology of Flue Gas Desulfurization in Sintering Process[J].Advanced Materials Research, 2013, :726-2290
|
[4] |
Wang S P, Bi X G, Weng D M.Study on a New Technology of Flue Gas Desulfurization in Sintering Process[J].Advanced Materials Research, 2013, :726-2290
|
[5] |
王兴连.国内外烧结烟气脱硫现状及存在的问题[J].冶金管理, 2012, (08):38-41
|
[5] |
王兴连.国内外烧结烟气脱硫现状及存在的问题[J].冶金管理, 2012, (08):38-41
|
[6] |
曲余玲, 毛艳丽, 张东丽.烧结烟气脱硫技术应用现状及发展趋势[J].冶金能源, 2010, (06):51-56
|
[6] |
曲余玲, 毛艳丽, 张东丽.烧结烟气脱硫技术应用现状及发展趋势[J].冶金能源, 2010, (06):51-56
|
[7] |
陈亮, 焦东明.钢铁企业烧结烟气除尘脱硫技术[J].科技与企业, 2012, (10):332-332
|
[7] |
陈亮, 焦东明.钢铁企业烧结烟气除尘脱硫技术[J].科技与企业, 2012, (10):332-332
|
[8] |
鲁健.烧结烟气特点及处理技术的发展趋势[J].内蒙古科技大学学报, 2012, (03):227-230
|
[8] |
鲁健.烧结烟气特点及处理技术的发展趋势[J].内蒙古科技大学学报, 2012, (03):227-230
|
[9] |
李啸.烧结烟气的特殊性及对脱硫工艺的影响[J].中国水运下半月, 2012, 12(05):224-225
|
[10] |
黄群亮.湿法烟气脱硫改造工艺的优选及经济性评价[J].华南理工大学, 2015, :-
|
[9] |
李啸.烧结烟气的特殊性及对脱硫工艺的影响[J].中国水运下半月, 2012, 12(05):224-225
|
[11] |
刘定平, 王玲.旋流雾化技术特点分析及其在烟气脱硫中的实验研究[J].应用化工, 2017, 46(10):2068-2072
|
[10] |
黄群亮.湿法烟气脱硫改造工艺的优选及经济性评价[J].华南理工大学, 2015, :-
|
[12] |
刘定平, 张亚曦, 周俊.旋流雾化脱硫塔除尘效果试验研究[J].环境工程, 2017, 35(02):68-71
|
[11] |
刘定平, 王玲.旋流雾化技术特点分析及其在烟气脱硫中的实验研究[J].应用化工, 2017, 46(10):2068-2072
|
[12] |
刘定平, 张亚曦, 周俊.旋流雾化脱硫塔除尘效果试验研究[J].环境工程, 2017, 35(02):68-71
|
[1] |
ZHANG Wei-li, WU Sheng-li, HU Zhong-jie. Analysis of affecting factors of activated coke denitrationefficiency for sintering flue gas[J]. Iron and Steel, 2020, 55(5): 109-115. |
[2] |
ZHANG Wei-li1,WU Sheng-li1,HU Zhong-jie1,2. Statistical analysis of factors affecting desulfurization rate of activated coke for sintering flue gas[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 281-288. |
[3] |
WANG Qing-guo,,ZHU Tong,LI Yong. Sintering flue gas purifying process and equipment by use of activated coke in Baosteel[J]. Iron and Steel, 2018, 53(3): 87-95. |
[4] |
ZHANG Hong-liang,,SHI Qi,LONG Hong-ming,,LI Jia-xin,CHUN Tie-jun,GAO Zhi-fang. Analysis of [NOx]removal process in sintering flue gas[J]. Iron and Steel, 2017, 52(5): 100-106. |
[5] |
WANG Zheng,CUI Heng,. Saline-sodic soils amelioration with sintering flue gas desulfurization gypsum[J]. Iron and Steel, 2015, 50(12): 47-52. |
[6] |
QIU Zheng-qiu,LI Jian-ming,WANG Jian-shan,ZHANG Xiao-long,. Application and Development of Pangang Flue Gas Desulphurization Technology[J]. Iron and Steel, 2014, 49(2): 74-78. |
|
|
|
|