|
|
Hot deformation behavior and energy dissipation diagram of 9Ni martensite stainless steel |
ZHAO Hong-yu1,2,LIU Rong-pei1,WANG Chang-jun2,LIANG Jian-xiong2,HU Jia-qi2 |
(1. Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093,Yunnan, China 2. Institute for Special Steels, Central Iron and Steel Research Institute, Beijing 100081, China) |
|
|
Abstract In order to study the hot deformation behavior of 9Ni martensite stainless steel,the thermal deformation test for the sampling of 9Ni steel forgings with[?400 mm]large sizes was carried out. The Gleeble-1500 thermal simulator was used to select the engineering strain 60%,the deformation temperature was 950-1 200 ℃,and the strain rate was 0.01-5 s-1. And the true stress-strain curves under different deformation processes were drawn. The constitutive equation of 9Ni steel was constructed by introducing Zener-Hollomon parameters. The relative error of this constitutive equation model was only 0.03%-0.42%,and had good goodness of fit. The energy dissipation diagram of 9Ni steel under different strain was drawn,and the optimum heat processing interval of large forgings of 9Ni steel was established with the microstructure after deformation. The temperature was at 1 100-1 150 ℃,and the strain rate was 0.1-0.3 s-1.
|
Received: 04 April 2018
Published: 11 October 2018
|
|
|
|
|
[1] |
杨跃辉, 蔡庆伍, 武会宾,等. 两相区热处理工艺对9Ni钢性能的影响[J]. 材料热处理学报, 2009, 30(3):92-95.
|
[1] |
杨跃辉, 蔡庆伍, 武会宾,等. 两相区热处理工艺对9Ni钢性能的影响[J]. 材料热处理学报, 2009, 30(3):92-95.
|
[2] |
ZHANGKun, WUHui-bin, TANGDi. High Temperature Deformation Behavior of Fe-9Ni-C Alloy[J]. Journal of Iron and Steel Research,International, 2012(5).
|
[2] |
ZHANGKun, WUHui-bin, TANGDi. High Temperature Deformation Behavior of Fe-9Ni-C Alloy[J]. Journal of Iron and Steel Research,International, 2012(5).
|
[3] |
杨跃辉, 蔡庆伍, 武会宾,等. 9Ni钢的高温变形行为及其数学模型研究[J]. 热加工工艺, 2009, 38(12):1-3.
|
[3] |
杨跃辉, 蔡庆伍, 武会宾,等. 9Ni钢的高温变形行为及其数学模型研究[J]. 热加工工艺, 2009, 38(12):1-3.
|
[4] |
谢章龙, 刘振宇, 王国栋. 低碳9Ni钢的动态再结晶数学模型[J]. 东北大学学报(自然科学版), 2010, 31(1):51-55.
|
[4] |
谢章龙, 刘振宇, 王国栋. 低碳9Ni钢的动态再结晶数学模型[J]. 东北大学学报(自然科学版), 2010, 31(1):51-55.
|
[5] |
莫丽, 王军. 基于FOA-LSSVM混合优化的9Ni钢本构模型[J]. 热加工工艺, 2015(12):56-59.
|
[5] |
莫丽, 王军. 基于FOA-LSSVM混合优化的9Ni钢本构模型[J]. 热加工工艺, 2015(12):56-59.
|
[6] |
Mc7queen H J, Ryan N D. Constitutive analysis in hot working[J]. Materials Science & Engineering A, 2002, 322(1):43-63.
|
[6] |
Mc7queen H J, Ryan N D. Constitutive analysis in hot working[J]. Materials Science & Engineering A, 2002, 322(1):43-63.
|
[7] |
Prasad Y V R K, Ravichandran N. Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps[J]. Bulletin of Materials Science, 1991, 14(5):1241-1248.
|
[7] |
Prasad Y V R K, Ravichandran N. Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps[J]. Bulletin of Materials Science, 1991, 14(5):1241-1248.
|
[8] |
Medina S F, Hernandez C A. General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels[J]. Acta Materialia, 1996, 44(1):137-148.
|
[8] |
Medina S F, Hernandez C A. General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels[J]. Acta Materialia, 1996, 44(1):137-148.
|
[9] |
陈二保. 铁基基体CVDTiN表观活化能之间的关系[J]. 安徽工业大学学报(自科版), 1990(3):18-23.
|
[9] |
陈二保. 铁基基体CVDTiN表观活化能之间的关系[J]. 安徽工业大学学报(自科版), 1990(3):18-23.
|
[10] |
Prasad Y, Gegel H L, Doraivelu S M, et al. Modeling of dynamic material behavior in hot deformation: forging of Ti-6242 [J]. Metallurgical Transactions A, 1984, 15(10): 1883-1892.
|
[10] |
Prasad Y, Gegel H L, Doraivelu S M, et al. Modeling of dynamic material behavior in hot deformation: forging of Ti-6242 [J]. Metallurgical Transactions A, 1984, 15(10): 1883-1892.
|
[11] |
Prasad Y V R K, Ravichandran N. Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps[J]. Bulletin of Materials Science, 1991, 14(5):1241-1248.
|
[11] |
Prasad Y V R K, Ravichandran N. Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps[J]. Bulletin of Materials Science, 1991, 14(5):1241-1248.
|
[12] |
Srinivasa N, Prasad Y. Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps [J]. Journal of Materials Processing Technology, 1995, 51(1): 171-192.
|
[12] |
Srinivasa N, Prasad Y. Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps [J]. Journal of Materials Processing Technology, 1995, 51(1): 171-192.
|
[13] |
王晓辉. USS122超高强度不锈钢热变形行为与强韧化机理的研究[D]. 昆明理工大学, 2015.
|
[13] |
王晓辉. USS122超高强度不锈钢热变形行为与强韧化机理的研究[D]. 昆明理工大学, 2015.
|
|
|
|