镀锡板翘曲控制策略研究与应用

doi:10.13228/j.boyuan.issn0449-749x.20190069

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1061 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract Aiming at problems of the warping control on tinplate,considering the heredity and evolution of the warping height and the direction on tinplate substrate and tinplate,the warping control strategy of the single cold rolled and double cold rolled tinplate substrate was researched,the influence of the coiling process on the warping height of the tinplate with different steel grades and specifications was analyzed,and the warping control characteristics of tension leveler in electrolytic tinning line was studied. On this basis,the warping control strategy of the tinplate during the temper rolling/double cold rolling,tension leveling and coiling process was put forward. It had been applied in a tinplate manufacturing plant,the accuracy of the warping height control of tinplate products had been greatly improved.

Key words： tinplate warping double stands temper mill coiling tension leveler

Received: 25 February 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TANG Wei
	DU Feng-shan
	WEN Jie
	LIN Hai-hai

Cite this article:

TANG Wei,DU Feng-shan,WEN Jie等. Research and application of warping control strategy on tinplate[J]. Iron and Steel, 2019, 54(12): 55-61.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20190069 OR http://www.chinamet.cn/Jweb_gt/EN/Y2019/V54/I12/55

[1]	王晓东,黄久贵,李建中,等.国内外镀锡板生产发展状况[J].上海金属,2008,30(4):45.(WANG Xiao-dong,HUANG Jiu-gui,LI Jian-zhong,et al.International an domestic development situation of tinplate steel[J].Shanghai Metals,2008,30(4):45.)
[2]	何建锋. 宝钢镀锡板翘曲原因分析与对策[J].宝钢技术,2004(1):36.(HE Jian-feng.Cause analysis of tinplate warp and our countermeasures[J].Baosteel Technology,2004(1):36.)
[3]	张清东,戴杰涛.带钢板形翘曲变形行为的仿真[J].北京科技大学学报,2011,33(8):1006.(ZHANG Qing-dong,DAI Jie-tao.Simulation of warping deformation in thin steel strips[J].Journal of University of Science and Technology Beijing,2011,33(8):1006.)
[4]	李靖,万军,任新意,等.高强集装箱板平整轧制研究与实践[J].轧钢,2018,35(6):74.(LI Jing,WAN Jun,REN Xin-yi,et al.Research and practice of skin pass rolling for high strength handling container plate[J].Steel Rolling,2018,35(6):74.)
[5]	张勃洋,卢兴福,张立元,等.冷轧极薄带钢复杂板形翘曲变形行为研究[J].机械工程学报,2018,54(12):185.(ZHANG Bo-yang,LU Xing-fu,ZHANG Li-yuan,et al.Analysis of complex warping deformation for cold-rolled strip[J].Journal of Mechanical Engineering,2018,54(12):185.)
[6]	张清东,卢兴福,戴杰涛,等.冷轧带钢板形翘曲变形过程及规律的解析[J].北京科技大学学报,2014,36(3):378.(ZHANG Qing-dong,LU Xing-fu,DAI Jie-tao,et al.Analysis of warping deformation for cold-rolled strips[J].Journal of University of Science and Technology Beijing,2014,36(3):378.
[7]	Toshirou Fujwara,Tetsu Matoba,Yasuhiro Itazuri,et al.Improvement of high-strength steel sheet mechanical properties by rolling with small-diameter rolls[J].Journal of the JSTP,1997,38(440):819.
[8]	Wataru Baba,Masaru Miyake,Jun Yanagimoto.Warping behavior of thin strip with single-drive rolling[J].Key Engineering Materials,2017,725:537.
[8]	Wataru Baba,Masaru Miyake,Jun Yanagimoto.Warping behavior of thin strip with single-drive rolling[J].Key Engineering Materials,2017,725:537.
[9]	Mucke G,Karhausen F,Putz P D.Methods of describing and assessing shape deviation in strips[J].Metallurgical Plant and Technology International,2002,25(3):58.
[10]	魏立群,柳谋渊,张杏耀,等.平整轧平整轧制中轧件L 弯成因分析与及对策[J].轧钢,2003,20(2):20.(WEI Li-qun,LIU Mou-yuan,ZHANG Xing-yao,et al.Analysis of the causes of L camber of strip in skin passing and its countermeasures[J].Steel Rolling,2003,20(2):20.)
[11]	陈青,王彪,徐凌云,等.镀锡钢板分条翘曲的残余应力分析[J].理化检验(物理分册),2016,52:92.(CHEN Qing,WANG Biao,XU Ling-yun,et al.Residual stress analysis on warping deformation tinplates after strip cutting[J].Physical Testing and Chemical Analysis(Part A:Physical Testing),2016,52:92.)
[12]	徐鹏飞,江宏斌,李文涛,等.退火温度对翘曲镀锡薄板残余应力的影响[J].金属热处理,2018,43(11):160.(XU Peng-fei,WANG Hong-bin,LI Wen-tao,et al.Effect of annealing temperature on residual stresses in warped tin sheet[J].Heat Treatment of Metals,2018,43(11):160.)
[13]	胡建军,文杰,于孟,等.DR9镀锡板板形控制技术研究与应用[J].中国冶金,2018,28(6):37.(HU Jian-jun,WEN Jie,YU Meng,et al.Research and application of flatness control on DR9 tinplate[J].China Metallurgy,2018,28(6):37.)
[14]	顾正秋.不对称轧制时轧件弯曲的研究[J].鞍山钢铁学院学报,1985(1):74.(GU Zheng-qiu.Study on curvature of rolled stock in unsymmetrical rolling[J].Journal of Anshan Institute of Iron and Steel Technology,1985(1):74.)
[15]	丁荣杰, 柯可力,郑涛,等.冷轧过程板形翘曲行为的控制[J].金属世界,2013(3):52.(DING Rong-jie,KE Ke-li,ZHANG Tao,et al.Control of strip warping in cold rolling[J].Metal World,2013(3):52.)
[16]	方圆, 莫志英,孙超凡,等.二次冷轧压下率对镀锡板组织和性能的影响[J].钢铁,2019,54(2):48.(FANG Yuan,MO Zhi-ying,SUN Chao-fan,et al.Effect of secondary cold rolling reduction rate on microstructure and properties of tinplate[J].Iron and Steel,2019,54(2):48.)
[9]	Mucke G,Karhausen F,Putz P D.Methods of describing and assessing shape deviation in strips[J].Metallurgical Plant and Technology International,2002,25(3):58.
[17]	杜国强,袁文振,张宝平,等.连续退火机组带钢板形翘曲控制[J].中国冶金,2016,26(12):44.(DU Guo-qiang,YUAN Wen-zhen,ZHANG Bao-ping,et al.Buckling control for strip steel in continuous annealing line[J].China Metallurgy,2016,26(12):44.)
[10]	魏立群,柳谋渊,张杏耀,等.平整轧平整轧制中轧件L 弯成因分析与及对策[J].轧钢,2003,20(2):20.(WEI Li-qun,LIU Mou-yuan,ZHANG Xing-yao,et al.Analysis of the causes of L camber of strip in skin passing and its countermeasures[J].Steel Rolling,2003,20(2):20.)
[18]	林海海,常安,于孟,等.冷轧镀锌汽车板卷取工艺对翘曲的影响研究[J].轧钢,2016,33(3):25.(LIN Hai-hai,CHANG An,YU Meng,et al.Research on influence of coiling process on cold rolled galvanized automobile sheet′s warping[J].Steel Rolling,2016,33(3):25.)
[19]	方开泰, 马长兴.正交与均匀试验设计[M].北京:科学出版社,2001.(FANG Kai-tai,MA Chang-xing.Orthogonal and Uniform Experimental Design[M].Beijing:Science Press,2001.)
[11]	陈青,王彪,徐凌云,等.镀锡钢板分条翘曲的残余应力分析[J].理化检验(物理分册),2016,52:92.(CHEN Qing,WANG Biao,XU Ling-yun,et al.Residual stress analysis on warping deformation tinplates after strip cutting[J].Physical Testing and Chemical Analysis(Part A:Physical Testing),2016,52:92.)
[12]	徐鹏飞,江宏斌,李文涛,等.退火温度对翘曲镀锡薄板残余应力的影响[J].金属热处理,2018,43(11):160.(XU Peng-fei,WANG Hong-bin,LI Wen-tao,et al.Effect of annealing temperature on residual stresses in warped tin sheet[J].Heat Treatment of Metals,2018,43(11):160.)
[13]	胡建军,文杰,于孟,等.DR9镀锡板板形控制技术研究与应用[J].中国冶金,2018,28(6):37.(HU Jian-jun,WEN Jie,YU Meng,et al.Research and application of flatness control on DR9 tinplate[J].China Metallurgy,2018,28(6):37.)
[14]	顾正秋.不对称轧制时轧件弯曲的研究[J].鞍山钢铁学院学报,1985(1):74.(GU Zheng-qiu.Study on curvature of rolled stock in unsymmetrical rolling[J].Journal of Anshan Institute of Iron and Steel Technology,1985(1):74.)
[15]	丁荣杰, 柯可力,郑涛,等.冷轧过程板形翘曲行为的控制[J].金属世界,2013(3):52.(DING Rong-jie,KE Ke-li,ZHANG Tao,et al.Control of strip warping in cold rolling[J].Metal World,2013(3):52.)
[16]	方圆, 莫志英,孙超凡,等.二次冷轧压下率对镀锡板组织和性能的影响[J].钢铁,2019,54(2):48.(FANG Yuan,MO Zhi-ying,SUN Chao-fan,et al.Effect of secondary cold rolling reduction rate on microstructure and properties of tinplate[J].Iron and Steel,2019,54(2):48.)
[17]	杜国强,袁文振,张宝平,等.连续退火机组带钢板形翘曲控制[J].中国冶金,2016,26(12):44.(DU Guo-qiang,YUAN Wen-zhen,ZHANG Bao-ping,et al.Buckling control for strip steel in continuous annealing line[J].China Metallurgy,2016,26(12):44.)
[18]	林海海,常安,于孟,等.冷轧镀锌汽车板卷取工艺对翘曲的影响研究[J].轧钢,2016,33(3):25.(LIN Hai-hai,CHANG An,YU Meng,et al.Research on influence of coiling process on cold rolled galvanized automobile sheet′s warping[J].Steel Rolling,2016,33(3):25.)
[19]	方开泰, 马长兴.正交与均匀试验设计[M].北京:科学出版社,2001.(FANG Kai-tai,MA Chang-xing.Orthogonal and Uniform Experimental Design[M].Beijing:Science Press,2001.)