含铈304不锈钢夹杂物改性及耐腐蚀性能优化

doi:10.13228/j.boyuan.issn0449-749x.20190090

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1843 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The evolution of inclusions in steel before and after the cerium treatment was studied by adding different amounts of cerium into the 304 stainless steel. And the effects of inclusion properties on corrosion resistance of 304 stainless steel were analyzed using the corrosion weight loss experiment and electrochemical experiment. MnS inclusions and composite oxide inclusions mainly existed in the stainless steel without cerium, and the average size of inclusions is 8.6 μm, while the self-corrosion potential of steel is only -348.52 mV. After the addition of cerium, the inclusions are gradually modified into spherical or elliptical inclusions, and the average size is reduced, while the corrosion resistance of stainless steel is improved. When the content of cerium reaches 0.012%, the MnS inclusions in steel are all modified into spherical inclusions containing cerium, and the corrosion potential of stainless steel is as high as -311.25 mV, which has the best corrosion resistance. As the content of cerium continues increasing, the shape of the inclusions in steel becomes irregular, and the size of inclusions also increases, resulting in a decrease in the corrosion resistance of the stainless steel.

Key words： cerium treatment 304 stainless steel MnS inclusion corrosion resistance

Received: 06 March 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XI Xiao-jun
	YANG Shu-feng
	LI Jing-she
	ZHAO Meng-jing
	YE Mao-lin

Cite this article:

XI Xiao-jun,YANG Shu-feng,LI Jing-she等. Inclusion modification and corrosion resistance optimization of 304 stainless steel containing cerium[J]. Iron and Steel, 2020, 55(1): 20-26.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20190090 OR http://www.chinamet.cn/Jweb_gt/EN/Y2020/V55/I1/20

[1] Bhandari J, Khan F, Abbassi R, et al. Modelling of pitting corrosion in marine and offshore steel structures-A technical review[J]. Journal of Loss Prevention in the Process Industries, 2015, 37: 39.
[2] Vuillemin B, Philippe X, Oltra R, et al. SVET, AFM, and AES study of pitting corrosion initiated on MnS inclusions by microinjection[J]. Corrosion Science, 2003, 45(6): 1143.
[3] Schmuki P, Hildebrand H, Friedrich A, et al. The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion[J]. Corrosion Science, 2005, 47(5): 1239.
[4] Sudesh T L, Wijesinghe L, Blackwood D J. Real time pit initiation studies on stainless steels: The effect of sulphide inclusions[J]. Corrosion Science, 2007, 49(4): 1755.
[5] Williams E D, Kilburn M R, Cliff J, et al. Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion[J]. Corrosion Science, 2010, 52(11): 3702.
[6] Webb E G, Suter T, Alkire R C. Microelectrochemical measurements of the dissolution of single MnS inclusions, and the prediction of the critical conditions for pit initiation on stainless steel[J]. Journal of The Electrochemical Society, 2001, 148(5): B186.
[7] Webb E G, Alkire R C. Pit initiation at single sulfide inclusions in stainless steel I. Electrochemical microcell measurements[J]. Journal of the Electrochemical Society, 2002, 149(6): B272.
[8] Krawiec H, Vignal V, Heintz O, et al. Influence of the chemical dissolution of MnS inclusions on the electrochemical behavior of stainless steels[J]. Journal of the Electrochemical Society, 2005, 152(7): B213.
[9] Muto I, Izumiyama Y, Hara N. Microelectrochemical measurements of dissolution of MnS inclusions and morphological observation of metastable and stable pitting on stainless steel[J]. Journal of the Electrochemical Society, 2007, 154(8): C439.
[10] Muto I, Ito D, Hara N. Microelectrochemical investigation on pit initiation ar sulfide and oxide inclusions in type 304 stainless steel[J]. Journal of the Electrochemical Society, 2009, 156(2): C55.
[11] Chiba A, Muto I, Sugawara Y, et al. Effect of atmospheric aging on dissolution of MnS inclusions and pitting initiation process in type 304 stainless steel[J]. Corrosion Sience, 2016, 106: 25.
[12] Zhang L F, Taniguchi S. Fundamentals of inclusion removal from liquid steel by bubble flotation[J]. International Materials Reviews, 2000, 45(2): 59.
[13] Rogler J P, Heaslip L J, Mehrvar M. Inclusion removal in a tundish by gas bubbling[J]. Canadian Metallurgical Quarterly, 2004, 43(3): 407.
[14] GENG D Q, ZHENG J X, WANG K, et al. Simulation on decarburization and inclusion removal process in the Ruhrstahl-Heraeus (RH) process with ladle bottom blowing[J]. Metallurgical and Materials Transactions B, 2015, 46(3):1484.
[15] Trindade L B, Nadalon E A, Vilela A C F, et al. Numerical modeling of inclusion removal in electromagnetic stirred steel billets[J]. Steel Research International, 2007, 78(9): 706.
[16] ZHANG L F, WANG S Q, DONG A P, et al. Application of electromagnetic (EM) separation technology to metal refining process: A review[J]. Metallurgical and Materials Transactions B, 2014, 45(6): 2153.
[17] DU G, LI J, WANG Z B. Effect of initial large-sized inclusion content on inclusion removal during electroslag remelting of H13 die steel[J]. Ironmaking Steelmaking, 2018, 45(10): 919.
[18] LIU X T, ZHOU Y H, SHANG B L, et al. Flow behavior and filtration of steel melt in continuous-casting tundish[J]. Ironmaking Steelmaking, 1992, 19(3): 221.
[19] ZHANG X W, ZHANG L F, YANG W, et al. Characterization of the three-dimensional morphology and formation mechanism of inclusions in linepipe steels[J]. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2017, 48(1): 701.
[20] Verma N, Pistorius P C, Fruehan R J, et al. Transient inclusion evolution during modification of alumina inclusions by calcium in liquid steel: Part Ⅰ. Background, experimental techniques and analysis methods[J]. Metallurgical and Materials Transactions B, 2011, 42(4): 711.
[21] Verma N, Pistorius P C, Fruehan R J, et al. Transient inclusion evolution during modification of alumina inclusions by calcium in liquid steel: Part Ⅱ. Results and discussion[J]. Metallurgical and Materials Transactions B, 2011, 42(4): 720.
[22] XU J F, HUANG F X, WANG X H. Formation mechanism of CaS-Al₂O₃ inclusions in low sulfur Al-killed steel after calcium treatment[J]. Metallurgical and Materials Transactions B, 2016, 47(2): 1217.
[23] JIANG Z H, ZHUANG Y, LI Y, et al. Effect of modification treatment on inclusions in 430 stainless steel by Mg-Al alloys[J]. Journal of Iron and Steel Research, International, 2013, 20(5): 6.
[24] ZHANG T S, WANG D Y, JIANG M F. Effect of magnesium of evolution of oxide and sulphide in liquid iron at 1873[J]. Journal of Iron and Steel Research, International, 2014, 21(12): 1073.[25] ZHANG T S, LIU C J, JIANG M F. Effect of Mg on behavior and particle size of inclusions in Al-Ti deoxidized molten steels[J]. Metallurgical and Materials Transactions B, 2016, 47(2): 1217.
[26] 肖国华, 董瀚, 王毛球, 等. 镁和镁钙处理对非调质钢中硫化物形态的影响[J]. 钢铁, 2011, 46(4): 65. (XIAO Guo-hua, DONG Han, WANG Mao-qiu, et al. Effect of Mg/Ca-treatment on morphology of sulfide in non-quenched and tempered steel[J]. Iron and Steel, 2011, 46(4): 65.)
[27] 刘威, 杨树峰, 李京社, 等. 钙镁复合处理20CrMnTi钢中硫化物夹杂[J]. 钢铁, 2017, 52(12): 21. (LIU Wei, YANG Shu-feng, LI Jing-she, et al. Modification of sulphide inclusions in 20CrMnTi steel by calcium-magnesium treatment[J]. Iron and Steel, 2017, 52(12): 21.)
[28] Adabavazeh Z, Hwang W S, Su Y H. Effect of adding cerium on microstructure and morphology of Ce-based inclusions formed in low-carbon steel[J]. Scientific Reports, 2017, 7: 46503.
[29] 高建兵, 常朋飞, 张彬彬, 等. 铈对新型超级双相不锈钢2707HD夹杂物变性的影响[J]. 钢铁, 2018, 53(9): 37. (GAO Jian-bing, CHANG Peng-fei, ZHANG Bin-bin, et al. Effect of Ce on inclusion modification in a new type super duplex stainless steel 2707HD[J]. Iron and Steel, 2018, 53(9): 37.)
[30] 习小军, 赖朝彬, 吴春红, 等. 大线能量焊接船板钢的研究现状与发展[J]. 有色金属科学与工程, 2016, 7(5): 55. (XI Xiao-jun, LAI Chao-bin, WU Chun-hong, et al. Research situation and development of ship plate steel by high heat input welding[J]. Nonferrous Metals Science and Engineering, 2016, 7(5): 55.)
[31] 岳尔斌, 李娜. 稀土铈对2.9%Si无取向硅钢磁性能的影响[J]. 钢铁, 2014, 49(12): 65. (YUE Er-bin, LI Na. Effect of rare earth cerium on the magnetic properties of 2.9% Si non-oriented electrical steels[J]. Iron and Steel, 2014, 49(12): 65.)