不同热解半焦与高炉喷吹煤粉燃烧性能差异性

doi:10.13228/j.boyuan.issn0449-749x.20190222

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (910 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Studying the combustion performance of different char and pulverized coal injection is conducive to char injection in the blast furnace and reducing the cost of ironmaking. Different char samples were prepared in a tube furnace by changing the pyrolysis temperature, pyrolysis rate, pyrolysis holding time and pyrolysis atmosphere, and the changes in specific surface area, calorific value and activation energy were measured by proximate analysis and thermogravimetric experiments. The differences in combustion performance between different pyrolysis chars and two kinds of injected pulverized coals were studied. The results show that the combustion performances of chars prepared under different pyrolysis conditions are mostly between two kinds of injected coals, and the pyrolysis temperature is the most important factor affecting the char reaction performance. With the temperature increasing, the activation energy of char during combustion first decreases and then increases. The char pore structures prepared by different pyrolysis temperatures are more developed than the injected coal, and the cumulative pore volume and specific surface area both increase first and then decrease, which is basic correspond to the combustion performance. The temperature of 550 ℃ is a suitable pyrolysis temperature for the preparation of highly reactive char, which is a benefit to control the pyrolysis conditions to prepare high reactivity char, and it is also conducive to the application of char in the blast furnace injection.

Key words： thermal analysis combustion performance pulverized coal injection char

Received: 20 May 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Hao
	ZOU Chong
	HE Jiang-yong
	WANG Wei-an
	LIU Zhan-wei
	SHI Shuai

Cite this article:

WU Hao,ZOU Chong,HE Jiang-yong等. Difference of combustion performance between different pyrolytic char and pulverized coal injection in blast furnace[J]. Iron and Steel, 2020, 55(4): 12-19.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20190222 OR http://www.chinamet.cn/Jweb_gt/EN/Y2020/V55/I4/12

[1] 赵俊学,李惠娟,李小明,等.煤低温干馏生产工艺进展及分析[J].洁净煤技术, 2010,16(6):20.(ZHAO Jun-xue,LI Hui-juan,LI Xiao-ming,et al.Progress and analysis of low temperature dry distillation of coal[J].Clean Coal Technology,2010,16(6):20.)
[2] 虎锐,李波,张秀成.榆林地区兰炭产业发展现状及其前景[J].中国煤炭, 2008,34(5):69.(HU Rui,LI Bo,ZHANG Xiu-cheng.Current situation and prospect of orchid carbon industry in Yulin area[J].China Coal,2008,34(5):69.)
[3] 张寿荣,毕学工.关于大量喷煤高炉的某些理论问题的思考[J].钢铁,2004,39(2):8.(ZHANG Shou-rong,BI Xue-gong.Thoughts on some theoretical problems of large-scale coal injection blast furnace[J].Iron and Steel,2004,39(2):8.)
[4] Asanuma M,Ariyama T,Sato M,et al.Development of waste plastics injection process in blast furnace[J].ISIJ International,2000,40(3):244.
[5] 杨双平,蔡文淼,郑化安.高炉喷吹半焦及其性能分析[J].过程工程学报,2014,14(5):896.(YANG Shuang-ping,CAI Wen-miao,ZHENG Hua-an.Blast furnace injection of semi-coke and its performance analysis[J].The Chinese Journal of Process Engineering,2014,14(5):896.)
[6] 李杰, 李小静, 李帮平, 等. 兰炭用作高炉喷吹燃料的试验分析[J]. 中国冶金, 2019, 29(12): 14.(LI Jie, LI Xiao-jing, LI Bang-ping, et al. Experimental analysis on use of semi-coke as fuel for blast furnace injection[J]. China Metallurgy, 2019, 29(12): 14.)
[7] 李鹏程,张建良,徐润生.改质煤、兰炭和木炭作为高炉喷吹用燃料的基础研究[J].冶金能源, 2015,34(3):41.(LI Peng-cheng,ZHANG Jian-liang,XU Run-sheng.Basic research on modified coal, blue charcoal and charcoal as fuels for blast furnace injection[J].Energy for Metallurgical Industry,2015,34(3):41.)
[8] 张立国,任伟,刘德军.半焦作为高炉喷吹用煤研究[J].鞍钢技术,2015,391(1):13.(ZHANG Li-guo,REN Wei,LIU De-jun.Study on semi-coke as coal for blast furnace injection[J].Angang Technology,2015,391(1):13.)
[9] 徐涛,王海洋,张建良,等. 兰炭灰熔融特性的计算模型[J]. 中国冶金, 2018, 28(12): 15. (XU Tao,WANG Hai-yang,ZHANG Jian-liang,et al. Calculating model for melting characteristics of semi coke[J]. China Metallurgy, 2018, 28(12):15.)
[10] 何选明,付鹏睿,王春霞,等.用于高炉喷吹的低阶煤低级转化半焦的燃烧性能[J].钢铁, 2014, 49(9):92.(HE Xuan-ming,FU Peng-rui,WANG Chun-xia,et al.Combustion performance of low-rank converted semi-coke from low-rank coal for blast furnace injection[J].Iron and Steel,2014, 49(9):92.)
[11] 邹冲,马成,赵俊学,等.中低温热解半焦作为高炉喷吹燃料的现状分析及建议[J].洁净煤技术,2017,23(1):57.(ZOU Chong,MA Cheng,ZHAO Jun-xue,et al.Analysis and suggestions on current situation of medium and low temperature pyrolysis semi-coke as injection fuel for blast furnace[J].Clean Coal Technology,2017,23(1):57.)
[12] 王凯迪,张建良,王广伟,等. 欧洲生物质半焦与煤混合燃烧特性分析[J].中国冶金,2018,28(9):12.(WANG Kai-di,ZHANG Jian-liang,WANG Guang-wei,et al. Analysis of combustion characteristics of European biomass char and coal[J]. China Metallurgy,2018,28(9):12.)
[13] Anthony D G, Natalia K L, Zhang L, et al. Ignitability and combustibility of Yallourn pyrolysis char under simulated blast furnace conditions[J]. Fuel Processing Technology,2017(156):113.
[14] 张代林,林慧薪,王晓婷,等. 炼焦煤灰分对其结焦性的影响规律[J]. 钢铁,2017,52(8):10.(ZHANG Dai-lin,LIN Hui-xin,WANG Xiao-ting,et al. Influence of ash of coking coals on its coking property[J]. Iron and Steel,2017,52 (8):10.)
[15] JIANG H, ZHANG J, FU J, et al. Properties and structural optimization of pulverized coal for blast furnace injection[J].Journal of Iron and Steel Research, International,2011,18(3):6.
[16] 彭政富, 张建良, 毕传光, 等. 焦粉与兰炭对高炉混煤燃烧特性的影响[J]. 钢铁, 2019, 54(12): 10. (PENG Zheng-fu, ZHANG Jian-liang, BI Chuan-guang,et al. Effect of coke powder and semi-coke on combustion characteristics of blast furnace blended coal[J]. Iron and Steel, 2019, 54(12): 10.)
[17] 戴财胜,刘晓芳,戴谨泽,等.低阶煤热解半焦燃烧性能的影响因素[J].煤炭转化,2016,39(9):44.(DAI Cai-sheng,LIU Xiao-fang,DAI Jin-ze,et al.Influencing factors on combustion performance of pyrolysis semi-coke of low rank coal[J].Coal Conversion,2016,39(9):44.)
[18] 马淞江,刘晓芳,戴谨泽,等.温和热解条件下内蒙褐煤热解半焦的燃烧性能[J].煤炭学报,2015,40(5):1153.(MA Song-jiang,LIU Xiao-fang,DAI Jin-ze,et al.Combustion performance of lignite pyrolysis semi-coke in Inner Mongolia under mild pyrolysis conditions[J].Journal of China Coal Society, 2015,40(5):1153.)
[19] 胡召永,解桂林,郭志航,等.热解温度对高水分印尼褐煤半焦孔隙特性及燃烧特性的影响[J].热力发电,2014,43(10):74.(HU Zhao-yong,JIE Gui-lin,GUO Zhi-hang,et al.Effect of pyrolysis temperature on pore characteristics and combustion characteristics of Indonesian lignite semi-coke with high moisture[J].Thermal Power Generation,2014,43(10):74.)
[20] 张庆伟,申宝宏,曲思建,等.内蒙古褐煤热解半焦燃烧特性研究[J].洁净煤技术,2014,20(6):46.(ZHANG Qin-wei,SHEN Bao-hong,QU Si-jian,et al.Study on combustion characteristics of lignite pyrolysis semi-coke in Inner Mongolia[J].Clean Coal Technology,2014,20(6):46.)
[21] Anthony D G, Alexander Grufas, Ilia Lyamin, et al. Ignitability and combustibility of yallourn pyrolysis char blended with pulverized coal injection coal under simulated blast furnace conditions[J]. Energy and Fuels, 2016(30), 1858.
[22] 贝昆仑,王鹏,张永发.温度梯度下配合煤成焦和收缩特性研究[J].煤炭转化,2006,29(1):49.(BEI Kun-lun,WANG Peng,ZHANG Yong-fa.Coking and shrinkage characteristics of blended coal under temperature gradient[J]. Coal Conversion,2006,29(1):49.)
[23] LIU Q,WU K,DU R,et al.Kinetic analysis of Tar′s separation from lump coal[J].ISIJ International,2015,55(5):947.
[24] 胡荣祖,高胜利,赵凤起,等.热分析动力学[M].北京:科学出版社,2008.(HU Rong-zu,GAO Sheng-li,ZHAO Feng-qi,et al.Thermal Analysis Kinetics[M].Beijing: Science Press,2008.)