浸入式水口对82B钢方坯渣沟缺陷的影响

doi:10.13228/j.boyuan.issn0449-749x.20200052

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (4044 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract To solve the problem of slag-scratch defect on the surface of the 82B steel strand,a three-dimensional mathematical model of 180 mm×180 mm billet mold was built in the light of a continuous casting site. The study was based on the thought of increasing the temperature on the steel-slag interface and improving the melting and lubrication of mold slag. Under the use of mold electromagnetic stirring(M-EMS) process,the distribution of flow field and temperature in mold were compared with different straight bore type submerged entry nozzle. The results showed that,as the SEN internal-external diameter changed from 40/100 mm to 30/70 mm,the flow field zone with speed bigger than 0.15 m/s was enlarged near both sides of SEN,the impact of flow on the wall was weakened as the maximum speed on the horizontal section circumfluence decreased from 0.44 m/s to 0.42 m/s,and the maximum speed of molten steel on the mold surface increased from 0.12 m/s to 0.15 m/s,the area with high temperature was expanded. Comprehensive effects indicated that with the decrease of the inner-outer diameter of SEN,the temperature of molten steel near the slag-steel interface increased while the flow field in the mold has a relatively small impact. According to the field measured data,after decreasing the inner-outer diameter of SEN,the consumption of mold slag increased from 0.189 kg/t to 0.228 kg/t and the occurrence of slag-scratch defect on billet surface decreased obviously. It indicated that the slag melting at the molten steel surface was good and the lubrication effect was improved. The mathematical model can provide a good guide for optimizing the production process.

Key words： slag-scratch defect 82B steel billet mold M-EMS fluid flow

Received: 12 February 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZUO Xiao-tan
	ZHAO Li
	ZHANG Hong-biao
	TAO Qun-nan
	CHEN Yong-feng
	WANG Qiang-qiang

Cite this article:

ZUO Xiao-tan,ZHAO Li,ZHANG Hong-biao等. Effect of SEN structure on slag-scratch defect of 82B strand surface during continuous casting[J]. Iron and Steel, 2020, 55(10): 43-49.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20200052 OR http://www.chinamet.cn/Jweb_gt/EN/Y2020/V55/I10/43

[1] 吕长海,程树森,孙黎黎,等. SWRH82B钢生产工艺分析及优化[J]. 山东冶金,2018,40(2):14.(LÜ Chang-hai,CHENG Shu-sen,SUN Li-li,et al. Production process analysis and optimization of SWRH82B steel[J]. Shandong Metallurgy,2018,40(2):14.)
[2] 胡亮,郭红民段少平. 凝固末端电磁搅拌对82B碳偏析的影响[J]. 中国冶金,2018,28(9):63.(HU Liang,GUO Hong-min,DUAN Shao-ping. Effect of F-EMS on carbon segregation of 82B[J]. China Metallurgy,2018,28(9):63.)
[3] 车从荣,陈伟,金书淮,等. 淮钢大断面高碳钢圆坯保护渣的优化及应用[J]. 现代冶金,2017,45(6):37.(CHE Cong-rong,CHEN Wei,JIN Shu-huai,et al. Optimization and application of mold slag for continuous casting high-cross section billet of high-carbon steel[J]. Modern Metallurgy,2017,45(6):37.)
[4] 关文博,王峥,朱嘉,等. 70钢铸坯表面渣沟缺陷分析与优化[J]. 山西冶金,2019(5):21.(GUAN Wen-bo,WANG Zheng,ZHU Jia,et al. Analysis and optimization the reason of surface slag-scratch defect of casting billet on No.70 steel[J]. Shanxi Metallurgy,2019(5):21.)
[5] 张俊锋,耿建林. GCr15轴承钢铸坯表面渣沟缺陷成因分析[C]//低成本炼钢技术交流论坛. 无锡:河北省冶金学会,2013:144.(ZHANG Jun-feng,GENG Jian-lin. Analysis of surface slag-scratch defect of GCr15 steel[C]//Forum of Low-Cost Steelmaking Technology. Wuxi: Hebei Province Society for Metallurgy,2013:144.)
[6] 祁建军,张铁军,宋海,等. 34Mn6大断面圆管坯表面渣沟缺陷分析[J]. 包钢科技,2001,27:61.(QI Jian-jun,ZHANG Tie-jun,SONG Hai,et al. Analysis on surface slag runner of 34Mn6 fracture round billet[J]. Science and Technology of Baotou Steel Corporation,2007,27:61.)
[7] 金文俊,智建国,成永久. 大方坯角部“冷疤”和面部渣沟缺陷成因分析[J]. 包钢科技,2007,33(1):17.(JIN Wen-jun,ZHI Jian-guo,CHENG Yong-jiu. Analysis on formation cause of 'cold scar' and surface faults of blooms[J]. Science and Technology of Baotou Steel Corporation,2007,33(1):17.)
[8] 王璞,李少翔,陈列,等. 电磁搅拌对大圆坯结晶器冶金行为影响的探讨[J]. 钢铁,2019,54(8):82.(WANG Pu,LI Shao-xiang,CHEN Lie,et al. Investigation of mold metallurgical behavior under electromagnetic stirring for round bloom[J]. Iron and Steel,2019,54(8):82.)
[9] 于海岐,朱苗勇. 圆坯结晶器电磁搅拌过程三维流场与温度场的数值模拟[J]. 金属学报,2008,44(12):1465.(YU Hai-qi.ZHU Miao-yong. 3D numerical simulation of flow field and temperature field in a round billet continuous casting mold with electromagnetic stirring[J]. Acta Metallurgica Sinica,2008,44(12):1465.)
[10] 张静,杨龙,吴会平. 电磁搅拌作用下水口深度对液面波动的影响[J]. 钢铁,2016,51(3):32.(ZHANG Jing,YANG Long,WU Hui-ping. Influence of nozzle submerged depth on fluctuation of liquid level with electromagnetic stirring[J]. Iron and Steel,2016,51(3):32.)
[11] 张静,马靓,吴会平. 水口结构对连铸中低碳钢流场和温度场的影响[J]. 钢铁,2019,54(8):116.(ZHANG Jing,MA Liang,WU Hui-ping. Effect of nozzle structure on flow field and temperature field of medium low carbon steel in continuous casting[J]. Iron and Steel,2019,54(8):116.)
[12] JIANG Dong-bin,ZHU Miao-yong. Flow and solidification in billet continuous casting machine with dual electromagnetic stirrings of mold and the final solidification[J]. Steel Research International,2014,85(9):1.
[13] Maurya A,Jha P. Influence of electromagnetic stirrer position on fluid flow and solidification in continuous casting mold[J]. Applied Mathematical Modelling,2017,48:736.
[14] SUN H,ZHANG J. Study on the macrosegregation behavior for the bloom continuous casting:Model development and validation[J]. Metallurgical and Materials Transactions B,2014,45(3):1133.
[15] WANG Qiang-qiang,ZHANG Li-feng. Influence of FC-mold on the full solidification of continuous casting slab[J]. JOM,2016,68(8):2170.
[16] Karl-Heinz Spitzer,Mathias Dubke,Klaus Schwerdtfeger. Rotational electromagnetic stirring in continuous casting of round strands[J]. Metallurgical Transactions B,1986,17(1):119.