原始组织对690 MPa级海工钢亚温淬火后强韧性的影响

doi:10.13228/j.boyuan.issn0449-749x.20200134

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (5142 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to stabilize the intercritical temperature quenching process and industrial production,effect of three different heat treatment processes,including normalizing+intercritical quenching+tempering,on-line quenching+intercritical quenching+tempering,off-line quenching+intercritical quenching+tempering,on the microstructure and mechanical properties of 690 MPa grade marine engineering steel plate was studied. The results show that the optimal process is the off-line quenching+intercritical quenching+tempering,which greatly improve the low temperature impact toughness and elongation of steel plate with ensuring high strength and low yield ratio. The fracture morphology is all dimples and shows obvious ductile fracture. With the increase of holding time,the strength increases gradually,but the strength and lamellar ferrite change slightly when the holding time exceeds 30 min. Although high strength and low yield ratio can be guaranteed by on-line quenching+intercritical quenching+tempering,the impact energy shows relatively discrete and the stability is poor. The fracture morphology is mixed,mainly ductile fracture. The normalizing+intercritical quenching+tempering is the least effective especially for the low temperature impact toughness of steel plate. The fracture morphology is cleavage and shows clear brittle fracture. The strip ferrite morphology is the key factor of determining the low temperature toughness of the steel plate.

Key words： intercritical quenching marine engineering steel low temperature toughness elongation fracture morphology

Received: 23 March 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Tong
	ZHANG Peng
	WANG Jiu-qing
	PANG Hui-yong
	LONG Jie
	ZHAO Xi-wei

Cite this article:

WANG Tong,ZHANG Peng,WANG Jiu-qing等. Effect of original structure on strength and toughness of 690 MPa grade marine engineering steel after intercritical quenching[J]. Iron and Steel, 2020, 55(12): 72-80.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20200134 OR http://www.chinamet.cn/Jweb_gt/EN/Y2020/V55/I12/72

[1] 王长军,梁剑雄,刘振宝,等. 亚稳奥氏体对低温海工用钢力学性能的影响与机理[J]. 金属学报,2016,52(4):385. (WANG Chang-jun,LIANG Jian-xiong,LIU Zhen-bao,et al. Effect of metastable austenite on mechanical property and mechanism in cryogenic steel applied in oceaneering[J]. Acta Metallurgica Sinica,2016,52(4):385.)
[2] 陶素芬. 700 MPa级海洋平台用钢成分、组织与性能的研究[D]. 北京:北京科技大学,2015.(TAO Su-fen.Study on Composition,Microstructure and Property of 700 MPa Grade Steel for Offshore Structure[D]. Beijing:University of Science and Technology Beijing,2015.)
[3] 李振团,柴锋,杨才福,等. 淬火工艺对铜沉淀强化UHS钢组织性能的影响[J]. 钢铁,2019,54(6):79. (LI Zhen-tuan,CHAI Feng,YANG Cai-fu,et al. Effect of quenching process on microstructure and mechanical properties of Cu precipitated hardened ultra-high strength steel[J]. Iron and Steel,2019,54(6):79.)
[4] 刘振宇,唐帅,陈俊,等. 海洋平台用钢的研发生产现状与发展趋势[J]. 鞍钢技术,2015(1):1. (LIU Zhen-yu,TANG Shuai,CHEN Jun,et al. Latest progress on development and production of steels for off shore platform and their development tendency[J]. Angang Technology,2015(1):1.)
[5] 姚连登,赵四新. 采用在线热处理工艺开发高强钢的研究进展[J]. 钢铁研究,2011,39(5):54. (YAO Lian-deng,ZHAO Si-xin. Recent development of high strength structural steel plate by direct quenching[J]. Research on Iron and Steel,2011,39(5):54.)
[6] 胡锋,秦玉荣,车马俊,等. 临界淬火+回火工艺对超高强海工钢屈强比的影响[J]. 热加工工艺,2018,47(24):152.(HU Feng,QIN Yu-rong,CHE Ma-jun,et al. Effect of critical quenching and tempering process on yield ratio of ultra-high strength marine steel[J]. Hot Working Technology,2018,47(24):152.)
[7] 覃展鹏,王红鸿,童志,等. 亚温淬火工艺对低碳低合金高强钢组织及性能的影响[J]. 材料热处理学报,2017,38(9):142.(QIN Zhan-peng,WANG Hong-hong,TONG Zhi,et al. Influence of lamellarizing process on microstructure and properties of low carbon low alloy high-strength steel[J]. Transactions of Materials and Heat Treament,2017,38(9):142.)
[8] 侯家平,潘涛,朱莹光,等. 临界淬火工艺对9 Ni低温钢力学性能及精细组织的影响[J]. 材料热处理学报,2014,35(10):88.(HOU Jia-ping,PAN Tao,ZHU Ying-guang,et al. Effect of inter-critical quenching process on mechanical property and microstructure of 9 Ni cryogenic steel[J]. Transactions of Materials and Heat Treatment,2014,35(10):88.)
[9] 吴玉萍,肖昌利. 低合金钢亚温淬火强韧化研究[J]. 理化检验:物理分册,1997(2):11.(WU Yu-ping,XIAO Chang-li. Study of the strengthening and toughness of low alloy steel after subnormal temperature quenching[J]. Physical Testing and Chemical Analysis:Part A Physical Testing,1997(2):11.)
[10] LIU Q D,WEN H M,ZHANG H,et al. Effect of multistage heat treatment on microstructure and mechanical properties of high-strength low-alloy steel[J]. Metallurgical and Materials Transactions A,2016,47(5):1960.
[11] XIE Z J,YUAN S F,ZHOU W H,et al. Stabilization of retained austenite by the two-step inter-critical heat treatment and its effect on the toughness of alow alloyed steel[J]. Materials and Design,2014,59:193.
[12] XIE Z J,HAN G,ZHOU W H,et al. Study of retained austenite and nano-scale precipitation and their effects on properties of a low alloyed multi-phase steel by the two-step inter-critical treatment[J]. Materials Characterization,2016,113:60.
[13] 王敬忠,李科元,刘阿娇,等. 40CrNiMo钢国内外研究现状[J]. 钢铁,2018,53(5):1. (WANG Jing-zhong,LI Ke-yuan,LIU A-jiao,et al. Research status of 40CrNiMo steel at home and abroad[J]. Iron and Steel,2018,53(5):1.)
[14] Clarke A J,Speer J G,Matlock D K,et al. Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning[J]. Scripta Materialia,2009,61(2):149.
[15] 王猛,刘振宇,李成刚. 轧后超快冷及亚温淬火对5%Ni钢微观组织与低温韧性的影响机理[J]. 金属学报,2017,53(8):947.(WANG Meng,LIU Zhen-yu,LI Cheng-gang. Effects of ultra-fast cooling after hot rolling and lamellarizing on microstructure and cryogenic toughness of 5%Ni steel[J]. Acta Metallurgica Sinica,2017,53(8):947.)
[16] 马玉霞,党淑娥,秦尚武,等. SA508-3钢粗大非平衡组织重新加热奥氏体晶核形成与长大行为[J]. 金属热处理,2018,43(10):40.(MA Yu-xia,DANG Shu-e,QIN Shang-wu,et al. Formation and growth behavior of austenite nuclei in coarse and non-equilibrium structure of SA508-3 steel during reheating[J]. Heat Treatment of Metals,2018,43(10):40.)
[17] 符蓉,王国顺. 不同原始组织对20SiMnTi钢亚温淬火力学性能的影响[J]. 热加工工艺,2002(3):29.(FU Rong,WANG Guo-shun. The Effect of different original structure on mechanical properties of 20SiMnTi steel of the subcritically quenched specimens[J]. Hot Working Technology,2002(3):29.)
[18] 韩会全,刘彦春,张弛,等. 两相区热处理对不同初始组态钢板组织性能的影响[J]. 东北大学学报:自然科学版,2008,29(3):339.(HAN Hui-quan,LIU Yan-chun,ZHANG Chi,et al. Effect of heat treatment in α+γ region on microstruetures and properties of strips with different initial structures[J]. Journal of Northeastern University:Natural Science,2008,29(3):339.)
[19] 张宽,镇凡,曲锦波,等. 两相区淬火工艺对超高强度钢组织与性能的影响[J]. 金属热处理,2016,41(10):47.(ZHANG Kuan,ZHEN Fan,QU Jin-bo,et al. Effect of intercritical quenching process on microstructure and properties of ultra-high strength steel[J]. Heat Treatment of Metals,2016,41(10):47.)
[20] 牛延龙,刘清友,贾书君,等. 控冷工艺下组织及M/A岛对管线钢韧性的影响[J]. 钢铁,2020,55(6):96.(NIU Yan-long,LIU Qing-you,JIA Shu-jun,et al. Influence of microstructure and M/A island evolution on toughness of pipeline steel under controlled cooling process[J]. Iron and Steel,2020,55(6):96.)