|
|
Effect of B2O3-Na2O slag modifier on desulfurization slag performance of hot metal containing vanadium and titanium |
YANG Bi-wen1, WANG Hai-bei1, ZHENG Chao-zhen1, CHEN Liang2, HU Yi-hang3 |
1. Research and Design Institute of Metallurgical, BGRIMM Technology Group, Beijing 100160, China; 2. State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Pangang Group Research Institute Co., Ltd., Panzhihua 617000, Sichuan, China; 3. School of Engineering, Peking University, Beijing 100871, China |
|
|
Abstract In order to solve the problems of thick of slag, large of iron loss, and much of resulfurization in the slagging-off process after pre-desulfurization of hot metal containing vanadium and titanium, the effect of B2O3-Na2O slag modifier on resulfurization, melting point, and viscosity of the desulfurization slag was investigated by using FactSage thermodynamic software and combing with high-temperature experiments. The results showed that the melting point and viscosity of the desulfurization slag decreased significantly with the addition of B2O3 and Na2O. And the addition of CaO to the slag modifier helped to reduce resulfurization. The formula of slag modifier (45%-55% of CaO, 10%-12% of SiO2, 5%-8% of Al2O3, 15%-20% of B2O3, and 5%-10% of Na2O) to improve the performance of desulfurization slag was presented. It effectively reduced the melting point and viscosity of desulfurization slag and decreased the resulfurization, when the added amount of the slag modifier was 5%-10% of the desulfurization slag.
|
Received: 05 February 2021
|
|
|
|
[1] Vuolio T, Visuri V V, Paananen T, et al. Identification of rate, extent, and mechanisms of hot metal resulfurization with CaO-SiO2-Na2O slag systems[J]. Metallurgical and Materials Transactions B, 2019, 50(4): 1791. [2] 吴发达, 包燕平, 刘建华. 转炉冶炼低硫钢回硫的控制[J]. 炼钢, 2007, 23(3): 24.(WU Fa-da, BAO Yan-ping, LIU Jian-hua. Control on resulphurization in production of low sulphur steel in BOF[J]. Steelmaking, 2007, 23(3): 24.) [3] 刘国平, 徐小伟, 毛鸣, 等. 马钢300 t转炉炼钢系统钢中硫的控制研究与实践[J]. 钢铁, 2011, 46(9): 29.(LIU Guo-ping, XU Xiao-wei, MAO Ming, et al. Practice and research on sulfur control of 300 t BOF steelmaking process in Masteel[J]. Iron and Steel, 2011, 46(9): 29.) [4] 孙亮, 朱良, 赵晓东. 3种铁水脱硫工艺的应用实践[J]. 中国冶金, 2018, 28(3): 50.(SUN Liang, ZHU Liang, ZHAO Xiao-dong. Application practice of three kinds of hot metal desulphurization process[J]. China Metallurgy, 2018, 28(3): 50.) [5] XU J, HUANG F, WANG X, et al. Resulfurization behavior of pipeline steel in a converter steelmaking process[J]. Metallurgical Research and Technology, 2015, 112(5): 504. [6] Susaki K, Maeda M, Sano N. Influence of additives on sulfide capacity of CaO-CaF2-SiO2 slags[J]. Metallurgical Transactions B, 1990, 21(6): 1081. [7] Cho M K, Cheng J, Park J H, et al. Hot metal desulfurization by CaO-SiO2-CaF2-Na2O slag saturated with MgO[J]. ISIJ International, 2010, 50(2): 215. [8] Magnelöv M, Dahlberg A C, Gustavsson L, et al. Iron losses during desulphurisation of hot metal utilising co-injection of Mg and CaC2 combined with nepheline syenite[J]. Ironmaking and Steelmaking, 2015, 42(7): 525. [9] 梁新腾, 曾建华, 李扬洲, 等. 含钒钛铁水的脱硫渣改性剂和脱硫方法: 中国, 201410469708.1[P]. 2014-09-16.(LIANG Xin-teng, ZENG Jian-hua, LI Yang-zhou, et al. Desulfurization Slag Modifier and Desulfurization Method for Hot Metal Containing Vanadium and Titanium: China, 201410469708.1[P]. 2014-09-16.) [10] 蒋龙奎, 戈文荪, 陈永, 等. 一种降低含钒钛铁水脱硫扒渣铁损的方法: 中国, 201310632828.4[P]. 2013-11-27.(JIANG Long-kui, GE Wen-sun, CHEN Yong, et al. A Method to Reduce Iron Loss in Slagging-off Process after Desulfurization of Hot Metal Containing Vanadium and Titanium: China, 201310632828.4[P]. 2013-11-27.) [11] Wu L, Ek M, Song M, et al. The effect of solid particles on liquid viscosity[J]. Steel Research International, 2011, 82(4): 388. [12] 雷家柳, 赵栋楠, 朱航宇, 等. 基于IMCT理论的CaO-SiO2-MgO-Al2O3-Na2O渣系的脱硫热力学模型[J]. 钢铁, 2019, 54(3): 35. (LEI Jia-liu, ZHAO Dong-nan, ZHU Hang-yu, et al. A thermodynamic model of desulfurization for CaO-SiO2-MgO-Al2O3-Na2O slag based on IMCT theory[J]. Iron and Steel, 2019, 54(3): 35.) [13] 封波, 徐昊, 高卫, 等. LF精炼渣低氟化研究进展[J]. 中国冶金, 2014, 24(6): 1. (FENG Bo, XU Hao, GAO Wei, et al. Research progress on LF refining slag with low-fluorite[J]. China Metallurgy, 2014, 24(6): 1.) [14] 林银河, 符娅玲, 罗林根, 等. 高钛型高炉渣中B2O3替代CaF2的作用机理[J]. 钢铁, 2019, 54(2): 26. (LIN Yin-he, FU Ya-ling, LUO Lin-gen, et al. Effect on B2O3 replacing CaF2 of high Ti-bearing blast furnace slag[J]. Iron and Steel, 2019, 54(2): 26.) [15] Toop G W, Somis C S. Some new ionic concepts of silicate slags[J]. Canadian Metallurgical Quarterly, 1962, 1(2):129. [16] Maxl E, Hiebler H, Presslinger H, et al. Microanalytical investigations of oxidizing slags with special consideration of phosphorus- and sulphur-containing phases[J]. ISIJ International, 1993, 33(1): 88. [17] Ono H, Nakajima K, Maruo R, et al. Formation conditions of Mg2TiO4 and MgAl2O4 in Ti-Mg-Al complex deoxidation of molten iron[J]. ISIJ International, 2009, 49(7): 957. [18] Jung E J, Wook W, Sohn I, et al. A study on the interfacial tension between solid iron and CaO-SiO2-MO system[J]. Journal of Materials Science, 2010, 45(8): 2023. [19] ZENG L, WANG Y, FAN L, et al. Experimental study and thermodynamic optimization of the FeO-V2O3 system[J]. Journal of Iron and Steel Research, International, 2014, 21(10): 910. [20] Tsujino R, Nakashima J, Hirai M, et al. Behavior of desulfurization in ladle steel refining with powder injection at reduced pressures[J]. ISIJ International, 1989, 29(1): 92. [21] 魏寿昆. 炉渣氧化铁含量对脱硫的作用[J]. 金属学报, 1964, 7(2): 157.(WEI Shou-kun. The effect of the iron oxide content in molten slags upon desulphurization[J]. Acta Metall Since, 1964, 7(2): 157.) |
[1] |
ZHU Renlin1, LI Jianli1,2, YU Yue2, ZHU Hangyu2. Present situation of comprehensive utilization of KR desulfurization slag and research progress of CaS oxidation[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(3): 189-199. |
[2] |
ZHU Ren-lin, LI Jian-li, YU Yue, ZHU Hang-yu. Effect of sulfur content on occurrence state of sulfur in KR desulfurization slag[J]. Iron and Steel, 2022, 57(2): 54-62. |
[3] |
LIU Yanqiang1,ZHANG Binglong1,2,LI Xiangkui1,QIAO Huanshan1,TIAN Guichang1, JIANG Min2. Research and practice on “BOF-RH-CC” technology of high grade wheel steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(8): 734-743. |
[4] |
ZHU Ren-lin, LI Jian-li, SHEN Jia-hao, YU Yue, ZHU Hang-yu. Mineral composition of KR desulfurization slag and precipitation behavior of sulfur-containing phases[J]. Iron and Steel, 2021, 56(11): 72-77. |
[5] |
JIANG Teng-fei,ZHU Liang,LIU Feng-gang,ZHAO Xiao-dong,LUO Yan-zhao. Recycling of desulfurization slag in pretreatment of hot metal[J]. Iron and Steel, 2017, 52(2): 24-27. |
[6] |
XU Jian-fei, WANG Xin-hua, HUANG Fu-xiang, LIU Chun-yang. Analysis of phase and distribution of sulfur in KR desulfurization slag[J]. Iron and Steel, 2015, 50(1): 15-18. |
|
|
|
|