氧煤燃烧熔分炉炉料沉降与传热行为数值模拟

doi:10.13228/j.boyuan.issn0449-749x.20210171

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (5520 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The rotary kiln-pre-reduced oxygen coal combustion fusion iron making process uses the fine ore of wide particle size into furnace directly. After the counter current heat transfer and pre reduction of flue gas in the rotary kiln, the charge particles reach the oxygen coal combustion melting and separating furnace through the settling tube. In order to avoid the phenomena of charge particles scouring the furnace wall, wall accumulation and uneven gas-solid heat transfer in the settlement area, realize the coupling control of particle settlement and heat transfer process, minimize the temperature difference between charge and molten pool, ensure the stability of molten pool smelting and achieve good smelting effect. Computational fluid dynamics discrete element method (CFD-DEM) was used to study the effects of gas velocity and charge size on the settling trajectory and heat transfer behavior of charge particles under the action of counter current gas in the upper zone of oxygen coal combustion melting and separating furnace. The numerical simulation results show that the settling velocity of charge particles decreases with the increase of gas flow rate, and the effect of gas on small particle size is particularly obvious. The sedimentation effects of charge particles for each particle size are good when the gas velocity is 1 m/s; the sedimentation effects of charge particles with sizes of 1.0, 1.5 and 2.0 mm are relatively good when the gas velocity is 2 m/s; the charge particles with sizes of 1.5 and 2.0 mm can settle smoothly when the gas velocity is 3 m/s. For the heat transfer behavior of charge particles, the larger the gas velocity is, the smaller size of charge particles is, and the better heat transfer effect of the charge particles is. Considering the heat transfer and settlement behavior of charge, the settlement velocity and heat transfer of charge particles with particle size of about 1.0 mm are good under the action of gas velocity of 1 and 2 m/s.

Key words： oxygen coal combustion melting and separating furnace CFD-DEM charge particles gas settlement heat transfer

Received: 25 March 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Kai
	WEI Zhi-fang
	ZHANG Qiao-rong
	ZHANG Yu-zhu
	WANG Bin
	SHEN Yao-zong

Cite this article:

ZHAO Kai,WEI Zhi-fang,ZHANG Qiao-rong等. Numerical simulation of charge settlement and heat transfer behavior in oxygen coal combustion melting and separating furnace[J]. Iron and Steel, 2021, 56(11): 19-29.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20210171 OR http://www.chinamet.cn/Jweb_gt/EN/Y2021/V56/I11/19

[1] 肖鹏. 高炉炼铁技术创新实践及未来展望[J]. 钢铁, 2021, 56(6): 10.(XIAO Peng. Innovation practice and future prospects of blast furnace ironmaking technology[J]. Iron and Steel, 2021, 56(6): 10.)
[2] 王维兴. 2017年中钢协会员单位能源消耗评述[J]. 冶金管理, 2018, 31(6): 54.(WANG Wei-xing. Energy consumption of members of CISA in 2017[J].China Steel Focus, 2018, 31(6): 54.)
[3] 高建军, 齐渊洪, 严定鎏, 等. 中国低碳炼铁技术的发展路径与关键技术问题[J]. 中国冶金, 2021, 31(9): 64. GAO Jian-jun, QI Yuan-hong, YAN Ding-liu, et al. Development path and key technical problems of low carbon ironmaking in China[J]. China Metallurgy, 2021, 31(9): 64.)
[4] 朱仁良. 未来炼铁技术发展方向探讨以及宝钢探索实践[J]. 钢铁, 2020, 55(8): 2. (ZHU Ren-liang. Discussion on future development direction of ironmaking technology and exploratory practice of Baosteel[J]. Iron and Steel, 2020, 55(8): 2.)
[5] 田伟健,李辉,全魁,等.长流程钢铁企业的碳代谢模型与碳排放分析[J].冶金能源,2020,39(1):3.(TIAN Wei-jian,LI Hui,QUAN Kui,et al. Carbon metabolism model and carbon emission analysis of the integrated iron and steel enterprises[J].Energy for Metallurgical Industry,2020,39(1):3.)
[6] 项钟庸, 王筱留, 顾向涛. 再论落实高炉低碳炼铁生产方针[J]. 中国冶金, 2021, 31(9): 9.(XIANG Zhong-yong, WANG Xiao-liu, GU Xiang-tao. Further discussion on implementing production policy of low carbon ironmaking of blast furnace[J]. China Metallurgy, 2021, 31(9): 9.)
[7] 张永升, 张古兴, 伊凤永. 论传统高炉炼铁流程面临的问题和应对策略[J]. 中国金属通报, 2019(5): 110.(ZHANG Yong-sheng, ZHANG Gu-xing, YI Feng-yong. Problems and countermeasures of traditional blast furnace ironmaking process[J].China Metal Bulletin, 2019(5): 110.)
[8] 鲍继伟, 储满生, 柳政根, 等. 铁焦制备与高炉应用的研究进展[J]. 钢铁, 2020, 55(8): 38. (BAO Ji-wei, CHU Man-sheng, LIU Zheng-gen, et al. Research progress on preparation and application of iron coke in blast furnace[J]. Iron and Steel, 2020, 55(8): 38.)
[9] 岳争超. 富氧顶吹熔融还原炉数值模拟及试验研究[D]. 云南:昆明理工大学, 2010.(YUE Zheng-chao. Numerical Simulation and Experimental Study on Oxygen Enriched top Blown Smelting Reduction Furnace[D]. Yunnan:Kunming University of Science and Technology, 2010.)
[10] 常进,陈黔湘,刘清才,等.配煤炼焦过程中的炭化行为研究[J].冶金能源,2019,38(1):13.(CHANG Jin,CHEN Qian-xiang,LIU Qing-cai,et al. Study on carbonization characteristics of blending-coal coking[J]. Energy for Metallurgical Industry,2019,38(1):13.)
[11] 严珺洁. 超低二氧化碳排放炼钢项目的进展与未来[J]. 中国冶金, 2017, 27(2): 6.(YAN Jun-jie. Progress and future of ultra-low CO₂ steel making program[J]. China Metallurgy, 2017, 27(2): 6.)
[12] 刘宝山,贾凤泳,刘常鹏,等.浅谈钢铁企业能源构成及节能措施[J].冶金能源,2019,38(6):3.(LIU Bao-shan,JIA Feng-yong,LIU Chang-peng,et al. A brief discussion on the energy structure and energy saving methods in iron and steel industry[J]. Energy for Metallurgical Industry,2019,38(6):3. )
[13] Steffen R, Lüngen H B. State of the art technology of direct and smelting-reduction of iron ores[J]. Revue de Métallurgie,2004, 101(3): 171.
[14] 徐少兵, 许海法. 熔融还原炼铁技术发展情况和未来的思考[J]. 中国冶金, 2016, 26(10):33.(XU Shao-bing, XU Hai-fa. Development of smelting reduction iron making technology and future thinking[J].China Metallurgy, 2016, 26(10):33.)
[15] 孙健,戚添益,居殿春,等.回转窑多相传输过程数值模拟研究进展[J].冶金能源,2019,38(1):17.(SUN Jian,QI Tian-yi,JU Dian-chun,et al. Research progress on numerical simulation of multiphase transfer in rotary kiln[J]. Energy for Metallurgical Industry,2019,38(1):17.)
[16] 高建军, 万新宇, 齐渊洪,等. 回转窑预还原-氧煤燃烧熔分炼铁技术分析[J]. 钢铁研究学报, 2018, 30(2): 91.(GAO Jian-jun, WAN Xin-yu, QI Yuan-hong,et al.Technical analysis on ironmaking process of rotary kiln pre-reduction and smelting by coal and oxygen[J]. Journal of Iron and Steel Research, 2018, 30(2): 91.)
[17] 张晓华, 赵凯, 白庚琛, 等. 多约束条件下回转窑-氧煤燃烧熔分炉热工分析[J]. 钢铁, 2020, 55(3): 9. (ZHANG Xiao-hua, ZHAO Kai, BAI Geng-chen, et al. Thermal analysis of rotary kiln-oxygen combustion melting furnace under multi-constraint conditions[J]. Iron and Steel, 2020, 55(3): 9.)
[18] Nozawa K, Kamijo T, Shimizu M. A Quantitative description of void distributions in blast furnace raceway[J]. Tetsu-to-Hagane, 1995, 81(9):882.
[19] Matsui Y, Tanaka M, Sawayama M, et al. Analyses on dynamic solid flow in blast furnace lower part by deadman shape and raceway depth measurement[J]. ISIJ International, 2005, 92(10):1445.
[20] Takahashi H, Kawai H, Fukui T, et al. Effects of tuyere gas flow rate and deadman properties on discontinuous behavior of descending solid and gas static pressure in blast furnace-experimental analysis by a three-dimensional cold model[J]. Tetsu-to-Hagane, 2007, 93(10):1.
[21] Zhang S J, Yu A B, Zulli P, et al. Modelling of the solids flow in a blast furnace[J]. ISIJ International, 1998, 38(12):1311.
[22] 王平. 无料钟料流运动轨迹数学模拟[J]. 钢铁研究学报, 2006,18(5):5.(WANG Ping. Mathematical imitation of trajectory of burden flow for bellless top BF[J].Journal of Iron and Steel Research, 2006,18(5):5.)
[23] Natsui S, Ueda S, Kano J, et al. Development of advanced blast furnace simulation model based on discrete element method[C]//Proceedings of the 5th International Congress on the Science and Technology of Ironmaking. Shanghai: The Chinese Society for Metals, 2009: 1120.
[24] ZHOU Z Y, ZHU H P, YU A B, et al. Discrete particle simulation of gas-solid flow in a blast furnace[J]. Computers and Chemical Engineering, 2008, 32(8):1760.
[25] Adema A, Yang Y X, Boom R. Discrete element method-computational fluid dynamic simulation of the materials flow in an iron-making blast furnace[J]. ISIJ International, 2010, 50(7):954.
[26] Anderson T B, Jackson R. Fluid mechanical description of fluidized beds. stability of state of uniform fluidization[J]. Industrial and Engineering Chemistry Fundamentals, 1968, 7(1):12.
[27] Cundall P A, Strack O D L. A discrete numerical model for granular assemblies[J]. Géotechnique, 2008, 30(3):331.
[28] Schilling M, Schütz S, Piesche M. Numerical simulation of the transport and deposition behaviour of particles on filter fibres using Euler-Lagrange Method and coupling of CFD and DEM[J]. Scandinavian Journal of Trauma Resuscitation and Emergency Medicine, 2010(1):789.
[29] Tsuji Y, Kawaguchi T, Tanaka T. Discrete particle simulation of two-dimensional fluidized bed[J]. Powder Technology, 1993, 77(1):79.