钢铁炉窑协同处置冶金及市政难处理固废技术路线

doi:10.13228/j.boyuan.issn0449-749x.20210343

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2330 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Hazard-free and reutilization treatment are still the main directions of solid waste disposal,especially,under the background which achieving "peak carbon dioxide emissions carbon neutral" target,"replacing carbon by waste" is also an important route to reduce carbon emission. However, in current situations, the disposal cost of waste is still high, reutilization of waste is still insufficient, "NOT IN MY BACKYARD" effects is serious. Therefore, the new plot of co-processing metallurgical and urban difficult-to-process solid waste using steel industrial furance, especially sintering and pellitizing process, was presented. A new multi-dimension index system based on material property, energy property, hazardous property, and ecological match law based on best disposal route, should be established. A new co-processing technological route using smelting process, including Fire/Mositure pretreatment method coupling with thermal regulation optimizing, was built. Besides,the conception of reginal intelligent co-processing platform of solid waste based on Big Dipper and Web of Things was shown. The direction guidance and technological reference for co-processing of multi-source solid waste were given.

Key words： solid waste technology route of co-processing resource ecological matching intelligent co-processing platform

Received: 07 June 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YE Heng-di
	LI Qian
	WEI Jin-chao
	ZHOU Hao-yu
	WANG Zhao-cai
	SHEN Wei-min

Cite this article:

YE Heng-di,LI Qian,WEI Jin-chao等. Technology route research of metallurgical and urban solid waste co-processing using steel industrial furnace[J]. Iron and Steel, 2021, 56(11): 141-147.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20210343 OR http://www.chinamet.cn/Jweb_gt/EN/Y2021/V56/I11/141

[1] 张临峰,黄导. 钢铁工业大宗固体废物综合利用综述[J]. 冶金管理,2017(4):27.(ZHANG Lin-feng,HUANG Dao. Review of comprehensive utilization of bulk solid wastes from iron and steel industry[J]. Metallurgy Management,2017(4):27.)
[2] 张寿荣,张卫东. 中国钢铁企业固体废弃物资源化处理模式和发展方向[J]. 钢铁,2017,52(4):1.(ZHANG Shou-rong,ZHANG Wei-dong. Solid waste resources treatment mode and development tendency of iron and steel enterprises in China [J]. Iron and Steel,2017,52(4):1.)
[3] 田鹏,董洪旺,武献民,等. 钢铁渣综合利用现状及管控措施[J]. 冶金能源,2020,39(5):9.(TIAN Peng,DONG Hong-wang,WU Xian-min,et al. Comprehensive utilization and control measures of iron and steel slag[J]. Energy for Metallurgical Industry,2020,39(5):9.)
[4] 殳黎平,吴洪义. 宁钢钢渣资源化利用的创新与实践[J]. 冶金能源,2019,38(3):46.(SHU Li-ping,WU Hong-yi. Innovation and practice of recycling utilization of steel slag in Ningbo steel[J]. Energy for Metallurgical Industry,2019,38(3):46.)
[5] 王琳,孙本良,李成威. 钢渣处理与综合利用[J]. 冶金能源,2007,26(4):54.(WANG Lin,SUN Ben-liang,LI Cheng-wei. The treatment and comprehensive utilization of steel slag[J]. Energy for Metallurgical Industry,2007,26(4):54.)
[6] 中华人民共和国生态环境部. 2020年全国大、中城市固体废物污染环境防治年报[R]. 北京:中华人民共和国生态环境部,2020.(Ministry of Ecology and Environment of the People′s Republic of China. Annual Report on Prevention and Control of Environmental Pollution by Large and Medium Urban Solid Waste[R]. Beijing:Ministry of Ecology and Environment of the People′s Republic of China,2020.)
[7] 张康. 废机油的直接资源化利用及改性分级利用研究[D].太原:太原理工大学,2018.(ZHANG Kang. Researches on the Direct Resource Utilization and Modified Graded Utilization of Used Engine Oil[D]. Taiyuan: Taiyuan University of Technology,2018.)
[8] 张宏良. 危险废物理化特性分析及水泥窑替代燃料/原料焚烧配伍研究[D].重庆:重庆大学,2017.(ZHANG Hong-liang. Study on Physical and Chemical Properties of Hazardous Wastes and Compatibility in Cement Kilns[D]. Chongqing: Chongqing University, 2017.)
[9] 刘水石,周志安,景涛,等. 烧结过程协同处理垃圾焚烧飞灰的可行性探讨[J]. 中国冶金,2018,28(6):1.(LIU Shui-shi,ZHOU Zhi-an,JING Tao,et al. Feasibility discussion on cooperative processing of waste incineration fly ash with sintering process[J]. China Metallurgy,2018,28(6):1.)
[10] 韩健,侯健,邵久刚,等. 炼钢污泥入烧行为的分析与研究[J]. 烧结球团,2019,44(6):79.(HAN Jian,HOU Jian,SHAO Jiu-gang,et al. Analysis and investigation of sintering behavior with addition of steelmaking sludge[J]. Sintering and Pelletizing,2019,44(6):79.)
[11] 许永跃,曹银平,张福行,等. 宝钢焦化废弃物利用研究与应用[J]. 冶金能源,2018,37(2):55.(XU Yong-yue,CAO Yin-ping,ZHANG Fu-xing,et al. Research and application of coking waste utilization in Baosteel[J]. Energy for Metallurgical Industry,2018,37(2):55.)
[12] 赛音巴特尔,赵鹏,马刚平,等. 焦炉协同处置焦化有机危险废物研究与应用[C]//中国环境科学学会学术年会论文集(2014).成都:中国环境科学学会,2014:5686.(Saiyin Bater,Zhao Peng,Ma Gang-ping,et al. Research and application of co-processing organica hazardous waste using coke oven[C]//Academic annual conference of Chinese Society For Environmental Sciences (2014). Chengdu:Chinese Society for Environmental Sciences,2014:5686.)
[13] 郭廷杰. 日本的新炼焦技术[J]. 山西能源与节能,2007(3):25.(GUO Ting-jie. New coking technology in Japan[J]. Shanxi Energy and Conservation,2007(3):25.)
[14] 熊玮,王国强,周绍轩. 秸秆替代煤高炉喷吹的能源消耗及环境影响比较[J]. 环境科学与技术,2013,36(4):137.(XIONG Wei,WANG Guo-qiang,ZHOU Shao-xuan. Comparison of energy consumption and environmental impact of replacement of coal with straw injection into blast furnace[J]. Environmental Science and Technology,2013,36(4):137.)
[15] 刘竹林,蒋友源,郑林,等. 生物质炭添加比例对煤粉燃烧性能的影响[J]. 湖南工业大学学报,2020,34(1):85.(LIU Zhu-lin,JIANG You-yuan,ZHENG Lin,et al. Effect of biochar addition ratio on combustion performance of pulverized coal[J]. Jornal of Hunan University of Technology,2020,34(1):85.)
[16] 刘竹林,蒋友源,寿擎,等. 高炉混合喷吹用生物质燃料可磨性及燃烧性能分析[J]. 中国冶金,2020,30(3):8.(LIU Zhu-lin,JIANG You-yuan,SHOU Qing,et al. Analysis on grindability and combustion performance of biomass fuel for mixed injection of blast furnace[J]. China Metallurgy,2020,30(3):8.)
[17] 王飞,毛瑞,茅沈栋. 转底炉对转炉污泥的处理[J]. 钢铁,2019,54(12):117.(WANG Fei,MAO Rui,MAO Shen-dong. Utilization of converter sludge by rotary hearth furnace[J]. Iron and Steel,2019,54(12):117.)
[18] 彭程,范建峰. 转底炉处理赤泥工艺技术[J]. 中国冶金,2019,29(3):53.(PENG Cheng,FAN Jian-feng.Technology for red mud treated in rotary hearth furnace process[J]. China Metallurgy,2019,29(3):53.)
[19] 经文波. 赤泥固废资源利用研究[J]. 冶金能源,2021,40(4):7.(JING Wen-bo. Study on utilization of red mud solid waste resources[J]. Energy for Metallurgical Industry,2021,40(4):7.)
[20] 杨春善,任明欣. 日照钢铁固废尘泥处理实践[J]. 钢铁,2019,54(4):89.(YANG Chun-shan,REN Ming-xin. Practice of waste dust mud treatment in Rizhao Steel[J]. Iron and Steel,2019,54(4):89.)
[21] 杨殿才,高彦臣,徐金光. 采用电弧炉的危废资源化综合处理系统及其处理方法:中国,201911308677.0[P]. 2019-12-18.(YANG Dian-cai,GAO Yan-chen,XU Jin-guang. A Comprehensive Treatment System and Its Treatment Method for Hazardous Waste Recycling Using Electric Arc Furnace:China,201911308677.0[P]. 2019-12-18.)
[22] 王建斌,高宠光,郭小龙,等. 转炉处理含油固体废弃物的工艺与应用[J]. 河北冶金,2015(6):75.(WANG Jian-bin,GAO Chong-guang,GUO Xiao-long,et al. Process to treat oil-bearing solid waste ith converter and its application[J]. Hebei Metallurgy,2015(6):75.)
[23] 夏盛,童敏,封羽涛. 钢厂协同处置城市固体废弃物的实践与探索[J]. 广州化工,2017,45(18):138.(XIA Sheng,TONG Min,FENG Yu-tao. Practice and exploration on co-processing of municipal solid waste by steel mill[J]. Guangzhou Chemical Industry,2017,45(18):138.)
[24] 叶恒棣. 钢铁烧结烟气全流程减排技术[M]. 北京:冶金工业出版社,2019.(YE Heng-di. Flue Gas Full-Process Emission Reduction Technology for Sintering of Iron and Steel[M]. Beijing:Metallurigical Industry Press,2019.)