变形参数对GH4742合金动态再结晶及γ′相的影响

doi:10.13228/j.boyuan.issn0449-749x.20210522

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (10210 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the effects of deformation parameters on the dynamic recrystallization and γ′ phase of forged GH4742 superalloy,the true stress-true strain curves of forged GH4742 superalloy at deformation temperature of 1 050-1150 ℃ and the deformation ratio of 30%-70% under the strain rate of 0.1 s^-1were obtained by single-pass isothermal compression experiments,the variation of true stress-true strain and peak stress under different deformation parameters was analyzed,and meanwhile the micro-substructure and γ′ phase were characterized during the dynamic recrystallization process under different deformation parameters by SEM and EBSD, the geometric dislocation density of the matrix and the proportion of dynamic recrystallization were quantitatively calculated,and the hardness of the matrix under different deformation parameters was measured. The nucleation mechanism of dynamic recrystallization under different deformation parameters was discussed,and the evolution of micro-substructure and γ′ phase was deeply analyzed during the dynamic recrystallization process. The results show that there were a large number of undissolved primary γ′ phase in the matrix at deformation temperature of 1 080 ℃,the proportion of low-angle grain boundaries(LAGs) exceeded 35%,and the proportion of dynamic recrystallization was less than 35%,and the nucleation mechanism was mainly continuous dynamic recrystallization; The size of the primary γ′ phase decreased,and then it re-dissolved progressively in the matrix at deformation temperature of 1 110 ℃,the proportion of LAGs was less than 8%,and the proportion of dynamic recrystallization was more than 75%,and the main nucleation mechanism was discontinuous dynamic recrystallization. With increasing deformation ratio,the size of primary γ′ phase increased and the number density of that decreased,the proportion of LAGs decreased significantly,and the proportion of dynamic recrystallization of the matrix increased. The hardness of the matrix increased significantly with the increase of the deformation ratio at the low deformation temperature,whereas the hardness increased first and then gradually tend to remain unchanged at the high deformation temperature. The dynamic recrystallization of GH4742 alloy had been completed at the deformation temperature of 1 110 ℃ and the deformation ratio of 50%,the microstructure was equiaxed dynamic recrystallized grains,and the matrix hardness was 357HV,which had a good hot forming performance.

Key words： GH4742 superalloy deformation parameter dynamic recrystallization precipitation hardness

Received: 31 August 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Zhen-tuan
	QIN He-yong
	TIAN Qiang
	ZHANG Wen-yun
	ZHAO Guang-pu

Cite this article:

LI Zhen-tuan,QIN He-yong,TIAN Qiang等. Effect of deformation parameters on dynamic recrystallization and γ′-phase of GH4742 superalloy[J]. Iron and Steel, 2022, 57(2): 117-126.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20210522 OR http://www.chinamet.cn/Jweb_gt/EN/Y2022/V57/I2/117

[1] Sahithya K,Balasundar I,Pant P,et al. Deformation behaviour of an as-cast nickel base superalloy during primary hot working above and below the gamma prime solvus[J]. Mater Sci Eng A,2019,754:521.
[2] 周舸,李鉴霖,门月,等. 涡轮盘用GH4742合金动态再结晶行为[J]. 稀有金属材料与工程,2021,50(4): 1318.(ZHOU Ge,LI Jian-lin,MEN Yue,et al. Dynamic recrystallization behavior of GH4742 superalloy used in turbine disk[J]. Rare Metal Materials and Engineering,2021,50(4):1318.)
[3] 郭建亭,周兰章,袁超,等. 我国独创和独具特色的几种高温合金的组织和性能[J]. 中国有色金属学报,2011,21(2):237.(GUO Jian-ting,ZHOU Lan-zhang,YUAN Chao,et al. Microstructure and properties of several originally invented and unique superalloys in China[J]. The Chinese Journal of Nonferrous Metals,2011,21(2):237.)
[4] 龙正东,庄景云,邓波,等. 一种提高高强化高温合金热加工性能的新方法[J]. 金属学报,1999,35(11):1211.(LONG Zheng-dong,ZHUANG Jing-yun,DENG Bo,et al.A new method to improve the hot workability of high strength Ni-based superalloys[J]. Acta Metallurgica Sinica,1999,35(11):1211.)
[5] 张北江,赵光普,胥国华,等. GH742合金热变形行为与微观组织演化[J]. 金属学报,2005,141(11):1207. (ZHANG Bei-jiang,ZHAO Guang-pu,XU Guo-hua,et al. Hot deformation behavior and microstructure evolution of superalloy GH742[J]. Acta Metallurgica Sinica,2005,141(11):1207.)
[6] 王哲,郑汉平,金鑫,等. GH742合金高温塑性的研究[J]. 材料工程,1998(4):43.(WANG Zhe,ZHENG Han-ping,JIN Xin,et al. Study on hot plasticity of GH742 alloy[J]. Journal of Materials Enineering, 1998(4):43.)
[7] 赵朋,杨树峰,杨曙磊,等. 镍基高温合金均质化冶炼研究进展[J]. 中国冶金,2021,31(4):1.(ZHAO Peng,YANG Shu-feng,YNAG Shu-lei,et al. Reasearch process in Homogenized smelting of nickle-based superalloy[J]. China Metallurgy,2021,31(4):1.)
[8] XIE B,YU H,SHENG T,et al. DDRX and CDRX of an as-cast nickel-based superalloy during hot compression at γ′ sub-/super-solvus temperatures[J]. Journal of Alloys and Compounds,2019,803:16.
[9] WAN Z,HU L,SUN Y,et al. Microstructure evolution and dynamic softening mechanisms during high-temperature deformation of a precipitate hardening Ni-based superalloy[J]. Vacuum,2018,155:585.
[10] 姜周华,张新法,刘福斌,等. 镍基高温合金生产用原材料有害杂质的控制[J]. 钢铁,2017,52(9):1.(JIANG Zhou-hua,ZHANG Xin-fa,LIU Fu-bin,et al. Harmful impurities control of raw material used in Ni-based superalloy production[J]. Iron and Steel,2017,52(9):1.)
[11] 谷雨,杨树峰,赵朋,等. 镍基高温合金GH4738的凝固偏析和碳化物析出行为[J]. 中国冶金,2021,31(7):13.(GU Yu,YANG Shu-feng,ZHAO Peng,et al. Solidification segregation and carbide precipitation behavior of nickel-based superalloy GH4738[J]. China Metallurgy,2021,31(7):13.)
[12] 任维新,刘彬,张礼峰,等. 镍基高温合金中γ/γ′两相晶格错配度的研究进展[J]. 上海金属,2015,37(2):40.(REN Wei-xin,LIU Bin,ZHANG Li-feng,et al. Research progress on the lattice misfit between the γ and γ′phases in the nickel-based superalloy[J]. Shanghai Metals,2015,37(2):40.)
[13] 李伟,梁学锋,谢永军,等. 均匀化和均匀化后处理对GH742合金γ′相的影响[J]. 材料工程,2005,12:33.(LI Wei,LIANG Xue-feng,XIE Yong-jun,et al. Effect of homogenization and post-homogenization treatment on γ′-phase of GH742 alloy ingot[J]. Journal of Materials Enineering,2005,12:33.)
[14] 师梦杰,毛强,郑合凤,等. 镍基合金中γ′相直线排列形貌的形成机制研究[J]. 上海金属,2021,43(1):77.(SHI Meng-jie,MAO Qiang,ZHENG He-feng,et al. Study on the formation mechanism of linear arranged γ' phase particles in nickel-base superalloy[J]. Shanghai Metals,2021,43(1):77.)
[15] YAN Z,WANG D,HE X,et al. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect[J]. Mater Sci Eng A,2018,723:212.
[16] Mousavizade S,Pouranvari M,Ghaini F M,et al. Dynamic recrystallization phenomena during laser-assisted friction stir processing of a precipitation hardened nickel base superalloy[J]. Journal of Alloys and Compounds,2016,685:806.
[17] Pradhan S K,Mandal S,Athreya C N,et al. Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy[J]. Mater Sci Eng A,2017,700:49.
[18] Miura H,Ozama M,Mogawa R,et al. Strain-rate effect on dynamic recrystallization at grain boundary in Cu alloy bicrystal[J]. Scripta Mater,2003,48(10):1501.
[19] 董建新. 镍基合金管材挤压及组织控制[M]. 北京:冶金工业出版社,2014. (DONG Jian-xin. Extrusion and Microstructure Control of Nickel Base Alloy Pipe[M]. Beijing:Metallurgy Industry Press,2014.)
[20] Sakai T,Belyakov A,Kaibyshev R,et al. Dynamic and post-dynamic recrystallization under hot,cold and severe plastic deformation conditions[J]. Progress in Materials Science,2014,60:130.
[21] LI F,FU R,YIN F,et al. Impact of γ′(Ni₃(Al, Ti)) phase on dynamic recrystallization of a Ni-based disk superalloy during isothermal compression[J]. Journal of Alloys and Compounds,2017,693:1076.