高炉喷吹生物质水热炭的可行性分析

doi:10.13228/j.boyuan.issn0449-749x.20210599

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2604 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Iron and steel production consumes a lot of fossil fuels, emits CO₂ and discharges pollutants. Reducing CO₂ emissions in the process of iron and steel production has become the key to achieve the goal of "carbon peak" and "carbon neutrality" for the iron and steel industry. Biomass as a product of plant photosynthesis, which has the characteristics of large yield, renewable and carbon neutral, is the only renewable carbon source with good storage and easy transportation characteristics. The efficient application of abundant biomass resources in iron-making with blast furnace has become the key to achieve green and sustainable development of iron and steel industry. However, biomass generally has the disadvantages of high moisture content, low fixed carbon content and calorific value, more harmful elements of alkali metals (K, Na) and poor crushing performance. Without carbonization treatment, it is difficult to meet the requirements for the process performance of fuel injection for blast furnace iron-making. The differences of pyrolysis and hydrothermal carbonization (HTC) technology principle was analyzed, and two type preparation technologies of biomass carbon and the basis performance and processing property of blast furnace injection was investigated. Results showed that the pyrolysis carbonization can remove the volatile in biomass, improve fixed carbon content and calorific value, but the ash and alkali metal elements will be enriched into biomass during pyrolysis. The content of ash and alkali metals in pyrolysis biomass was increased significantly, and the alkali metal content in four pyrolysis biomass was more than 1%, far above the standard for alkali metal content in coal with high basicity, which cannot meet the requirements of blast furnace injection. Hydrothermal carbonization could effectively remove volatile and dissolved mineral elements of biomass. Biomass hydrochar prepared had low content of ash and alkali metal, high fixed carbon and calorific value, high grindability and excellent combustion performance, which was met the requirement of blast furnace injection. The biomass HTC technology solves the restrictive problems of low biomass energy density, high content of harmful elements, and difficulties in grinding and injecting. The implementation for new technology of high quality carbon-neutral fuel for blast furnace injecting through the biomass HTC technology is beneficial to Baowu Group to achieve green and low-carbon iron-making.

Key words： iron-making biomass hydrothermal carbonization blast furnace injection CO₂ emission reduction

Received: 26 September 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Chen
	ZHU Ren-liang
	WANG Guang-wei

Cite this article:

WANG Chen,ZHU Ren-liang,WANG Guang-wei. Feasibility analysis of biomass hydrochar injection for blast furnace[J]. Iron and Steel, 2022, 57(5): 22-30.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20210599 OR http://www.chinamet.cn/Jweb_gt/EN/Y2022/V57/I5/22

[1] 习近平.在第七十五界联合国大会一般性辩论上的讲话[N].中华人民共和国国务院公报,2020, 28:5.(XI Jin-ping. Address at the 75th general debate of the United Nations general assembly[N]. Bulletin of The State Council of the People's Republic of China, 2020, 28:5.)
[2] WANG Guang-wei, ZHANG Jian-liang, LI Jui-yuan, et al. Hydrothermal carbonization of maize straw for hydrochar production and its injection for blast furnace[J]. Applied Energy, 2020, 226(10):114818..
[3] 郑伟成,XU Chunbao Charles,魏汝飞,等.高炉喷吹生物炭研究进展[J].钢铁研究学报, 2021, 33(1):1.(ZHENG Wei-cheng, XU Chunbao Charles, WEI Rui-fei, et al. Injection of biochar into blast furnace: Progress and prospects[J]. Journal of Iron and Steel Research, 2021, 33(1):1)
[4] WANG Guang-wei, ZHANG Jian-liang, SHAO Jiu-gang, et al. Thermal behavior and kinetic analysis of co-combustion of waste biomass/low rank coal blends[J]. Energy Conversion and Management, 2016, 124(18): 414.
[5] Norgate Terry, Haque Nawshad, Somerville Michael, et al. Biomass as a source of renewable carbon for iron and steelmaking[J]. ISIJ International, 2012, 52(8): 1472.
[6] 黄柱成,姜雄,易凌云,等. 生物质对钒钛磁铁矿还原行为影响及过程强化,钢铁,2021,56(1):12. (HUANG Zhu-cheng, JIANG Xiong, YI Ling-yun, et al. Effects of biomass on reduction of vanadium-bearing titanomagnetite and process enhancement[J]. Iron and Steel, 2021, 56(1):12.)
[7] 魏汝飞,周笛,徐春保,等. 不同生物质还原铁氧化物的特性[J]. 钢铁研究学报,2020,32(3):186(WEI Ru-fei, ZHOU Di, XU Chun-bao, et al. Reduction characteristics of iron oxide by different biomass[J]. Journal of Iron and Steel research, 2020,32(3): 186.)
[8] 刘竹林,蒋友源,寿擎,等. 高炉混合喷吹用生物质燃料可磨性及燃烧性能分析[J]. 中国冶金,2020,30(3):8.(LIU Zhu-lin, JIANG You-yuan, SHOU Qin, et al. Analysis on grindability and combustion performance of biomass fuel for mixed injection of blast furnace[J]. China Metallurgy, 2020, 30(3): 8.)
[9] 梁旺,李燕江,张建良,等. 炼铁过程富氧及混煤对燃料燃烧性能的影响[J]. 钢铁,2021,56(12):22. (LIANG Wang, LI Yan-jiang, ZHANG Jian-liang, et al. Influence of oxygen enrichment and coal blending on fuel combustion performance in ironmaking process[J]. Iron and Steel, 2021, 56(12):22.)
[10] 李进华,张建良,宋波,等. NLMK高炉喷吹煤粉优化搭配[J]. 中国冶金,2021,31(12):73.(LI Jin-hua, ZHANG Jian-liang, SONG Bo, et al. Optimal matching of pulverized coal injection for NLMK blast furnace[J]. China Metallurgy, 2021, 31(12):73.)
[11] Hannu Suopajaervi, Eva Pongracz, Timo Fabritius. The potential of using biomass-based reducing agents in the blast furnace: A review of thermochemical conversion technologies and assessments related to sustainability[J]. Renewable and Sustainable Energy Reviews, 2013, 25(9):511.
[12] Demirbas Ayhan, Arin Gönenç. An overview of biomass pyrolysis[J]. Energy Sources, 2002, 24(5): 471.
[13] Acharya Bimal, Dutta Animesh, Minaret Jamie. Review on comparative study of dry and wet torrefaction[J]. Sustainable Energy Technologies and Assessments, 2015, 12(12):26.
[14] 宁晓钧,党晗,张建良,等. 低阶煤热解与兰炭生产工艺研究进展[J]. 钢铁,2021,56(1):1. (NING Xiao-jun, DANG Han, ZHANG Jian-liang, et al. Research process of low-order coal pyrolysis process and semi-coke production process[J]. Iron and Steel, 2021,56(1):1.)
[15] Kambo Harpreet Singh, Dutta Animesh. Acomparative review of biochar and hydrochar in terms of production, physicao-chemical properties and applications[J]. Renewable and Sustainable Energy Reviews 2015,45(5):359.
[16] Bergius Friedrich. Production of hydrogen from water and coal from cellulose at high temperatures and pressures[J]. Journal of the Society of Chemical Industry, 1913, 9(10): 462.
[17] Sharma Hari Bhakta, Panigrahi Sagarika, Dubey Brajesh K. Hydrothermal carbonization of yard waste for solid bio-fuel production: Study on combustion kinetic, energy properties, grindability and flowability of hydrochar[J]. Waste Management, 2019, 91(10):108.
[18] Mäkelä Mikko, Volpe Mzurizio, Volpe Roberto, et al. Spatially resolved spectral determination of polysaccharides in hydrothermally carbonized biomass[J]. Green Chemistry, 2018, 20(5): 1114.
[19] Kambo Harpreet Singh, Dutta Animesh. Strength, storage, and combustion characteristics of densified lignocellulosic biomass produced via torrefaction and hydrothermal carbonization[J]. Applied Energy, 2014, 135(24):182.
[20] 王昱,邹冲,李建云,等. 高炉喷吹煤粉混加冶金油泥的燃烧性能[J].钢铁,2020,55(8):115.(WANG Yu, ZOU Chong, LI Jian-yun, et al. Combustion performance of blast furnace pulverized coal mixed with metallurgical sludge[J]. Iron and Steel, 2020,55(8):115.)
[21] He Chao, Giannis Apostolos, Wang Jing-yuan. Conversion of sewage sludge to clean solid fuel using hydrothermal carbonization: Hydrochar fuel characteristics and combustion behavior[J]. Applied Energy, 2013, 111(11):257.