|
|
Optimization of pulverized coal injection into blast furnace |
LI Tao1, SU Bu-xin2, WANG Guang-wei1, LIANG Wang1, ZHANG Cui-liu1, REN Kun1 |
1. School of Metallurgy and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 2. China Metallurgical Industry Planning and Research Institute, Beijing 100711, China |
|
|
Abstract Pulverized coal injection is one of the most effective measures to reduce coke ratio in blast furnace production. To obtain a higher coal/coke replacement ratio and reduce the cost of blast furnace production, it is necessary to select and match the coal injection types reasonably from a varieties range of coal. 12 types of coal provided by foreign steel plant were selected as experimental materials, and their basic property and process property which played a key role of pulverized coal injection in blast furnace were investigated systematically. Furthermore, comprehensive performance of different pulverized coal was studied based on the basic property result of test, and provided a guidance for optimal selection of pulverized coal injection into blast furnace. The results are shown that among the 12 kinds of coal powders, No.4 is high metamorphic anthracite, No.6, No.7 and No.12 are high metamorphic meager-lean coal, No.5, No.10 and No.11 are low metamorphic meager-lean coal, and No.1, No.2, No.3, No.8 and No.9 are low metamorphic bituminous coal. Compared with the pulverized coal injected into blast furnace in China, the 12 kinds of pulverized coal provided by foreign steel plant have lower ash and sulfur content, it is beneficial to reduce the amount of slag and sulfur load. Meanwhile, the pulverized coal has good jet performance, high fluidity and higher ash fusion temperature. Low metamorphic bituminous coal is explosive and cannot be used as blast furnace coal injection alone. The grindability and combustion performance of different coal powders vary greatly, which is the key to limit their application in blast furnace injection production. According to the calculation results of comprehensive performance evaluation indexes of different pulverized coal in blast furnace, the No.8, No.10, No.11 and No.12 pulverized coal were selected as pulverized coal into blast furnaces. Considering the different cost of pulverized coal, the No.12 pulverized coal was selected to inject into blast furnace can reduce the production cost most significantly.
|
Received: 21 October 2021
|
|
|
|
[1] 王海洋, 张建良, 王广伟, 等. 褐煤用于高炉喷吹的可行性[J]. 钢铁研究学报, 2017, 29(1):39. (WANG Hai-yang, ZHANG Jian-liang, WANG Guang-wei, et al. Feasibility research of brown coal injection for blast furnace[J]. Journal of Iron and Steel Research, 2017, 29(1):39.) [2] 徐万仁, 吴铿, 张龙来, 等. 高炉大喷煤时煤粉利用率的研究[J]. 钢铁, 2006,18(4):10. (XU Wan-ren, WU Keng, ZHANG Long-lai, et al. Research on utilization factor of injected into BF pulverized coal at large PCI rate[J]. Iron and Steel, 2006,18(4):10.) [3] 温大威. 世界高炉喷煤技术现状及发展[N]. 中国冶金报, 2006-02-28. (WEN Da-wei. Current status and development of coal injection technology for blast furnace in the world[N]. China Metallurgical News, 2006-02-28.) [4] 张福明.我国高炉炼铁技术装备发展成就与展望[J].钢铁,2019,54(11):1.(ZHANG Fu-ming. Prospect and development achievements of blast furnace ironmaking technologies and equipments in China[J]. Iron and Steel, 2019, 54(11):1.) [5] 曾宇, 姜喆, 张建良, 等. 大喷煤条件下鞍钢高炉喷吹煤粉的炉内利用率[J]. 中国冶金, 2022, 32(3): 61. (ZENG Yu, JIANG Zhe, ZHANG Jian-liang, et al. Utilization rate of coal injection for blast furnace in Ansteel under the large injection condition[J]. China Metallurgy, 2022, 32(3): 61.) [6] 周传典, 徐矩良, 刘云彩. 关于促进国炼铁技术发展的建议[J]. 炼铁, 2003(6):12. (ZHOU Chuan-dian, XÜ Ju-liang, LIU Yun-cai. Suggestions on promoting the development of national ironmaking technology[J]. Ironmaking, 2003(6):12.) [7] 汪大宏, 周焕威, 赵国治, 等. 包钢高炉富氧大喷煤量工业试验[J]. 炼铁, 1993(2):1. (WANG Da-hong, ZHOU Huan-wei, ZHAO Guo-zhi, et al. Industrial test of Baotou Steel′s blast furnace with enriched oxygen and large coal injection[J]. Ironmaking, 1993(2):1.) [8] 汪大宏, 徐守信, 杨天钧, 等. 氧煤喷枪的研制和应用[J]. 炼铁, 1993(2):7.(WANG Da-hong, XV Shou-xin, YANG Tian-jun, et al. Development and application of oxygen-coal spray gun [J]. Ironmaking, 1993(2):7.) [9] 李伟,杨晓乐,程磊,等.不同高炉煤粉的基础性能分析[J].中国冶金, 2019, 29(11): 67.(LI Wei,YANG Xiao-le,CHENG Lei,et al. Basic performance analysis of different blast furnace pulverized coal[J].China Metallurgy,2019,29(11):67.) [10] 顾飞, 刘述临. 高炉喷吹用煤的评价指标[J]. 炼铁, 1999(5):50. (GU Fei, LIU Shu-lin. Evaluation index of coal injection for blast furnace[J]. Ironmaking, 1999(5):50.) [11] 李杰,宋灿阳,李小静,等. 高炉喷吹煤粉燃烧性与反应性的研究与应用[J]. 中国冶金, 2019, 29(1): 8.(LI Jie,SONG Can-yang,LI Xiao-jing,et al. Research and application of combustibility and reactivity of pulverized coal injected in blast furnace[J]. China Metallurgy,2019, 29(1):8.) [12] 刘国强. 煤粉灰分对高炉生产的影响[J]. 唐钢科技, 1998(1):7.(LIU Guo-qiang. Effects on pulverized coal ash on blast furnace production[J]. Tangsteel Technology, 1998(1):7.) [13] 李进华, 张建良, 宋波, 等. NLMK高炉喷吹煤粉优化搭配[J]. 中国冶金, 2021, 31(12): 73.(LI Jin-hua, ZHANG Jian-liang, SONG Bo, et al. Optimal matching of pulverized coal injection for NLMK blast furnace[J]. China Metallurgy, 2021, 31(12): 73.) [14] 任燕, 徐万仁, 李军. 高炉风口结渣机理的研究[J]. 炼铁, 2004(3):23. (REN Yan, XU Wan-ren, LI Jun.Study on slag-bonding mechanism of tuyere in blast furnace[J]. Iron-making, 2004(3):23) [15] 朱国海. 高炉富氢还原研究[J].钢铁,2020,55(10):1. (ZHU Guo-hai. A review on hydrogen-enriched reduction in blast furnace[J]. Iron and Steel, 2020,55(10):1.) [16] 高强健,何耘丰,刘曌,等. 喷吹用煤粉爆炸特性及抑爆措施[J].钢铁, 2018, 53(12): 24.(GAO Qiang-jian,HE Yun-feng,LIU Zhao,et al. Fundamental of explosibility of pulverized coal injection and suppressed measures[J]. Iron and Steel, 2018, 53(12): 24.) [17] 刘涛, 刘颖昊. 从生命周期评价视角看钢铁企业“煤改天然气”[J].冶金能源, 2019, 38(3):3. (LIU Tao, LIU Ying-hao. Evaluation on the "coal to natural gas" in iron and steel enterprises from the perspectives of life cycle assessment[J]. Energy For Metallurgical Industry, 2019, 38(3):3) [18] 张卫东, 祁成林, 张建良, 等. 高炉喷吹煤粉的粉体流动性与煤质相关性[J]. 北京科技大学学报, 2012, 34(4):430. (ZHANG Wei-dong, QI Cheng-lin, ZHANG Jian-liang, et al. Correlation between the powder flow ability and coal quality of pulverized coal for a blast furnace[J]. Journal of University of Science and Technology Beijing. 2012, 34(4):430.) [19] 毕学工, 杨福, 梁尚国, 等. 高炉喷吹黄陵弱粘煤的原煤特性的研究[J]. 钢铁, 2009, 44(6):14. (BI Xue-gong, YANG Fu, LIANG Shang-guo, et al. Study of raw coal characteristics of huangling slight lv-caking coal for blast furnace injection[J]. Iron and Steel, 2009,44(6):14.) [20] 祁成林, 冯根生, 于春梅. 基于Carr指数法的高炉喷煤流动特性研究[J]. 实验技术与管理, 2016, 33(8):54. (QI Cheng-lin, FENG Gen-sheng, YU Chun-mei. Research on flow ability of pulverized coal injection based on Carr index method[J]. Experimental Technology and Management, 2016,33(8):54.) [21] WANG Guang-wei, ZHANG Jian-liang, SHAO Jiu-gang, et al. Characterisation and model fitting kinetic analysis of coal/biomass co-combustion[J]. Thermochica ACTA, 2014, 591:68. [22] ZHANG Jian-liang, WANG Guang-wei, SHAO Jiu-gang, et al. Pulverized coal combustion of nitrogen free blast furnace[J]. Journal of Iron and Steel Research, International,2013, 20(3): 1. [23] WANG Guang-wei,ZHANG Jian-liang,HOU Xin-mei,et al. Study on CO2 gasification properties and kinetics of biomass chars and anthracite char[J]. Bioresource Technology, 2015, 177:66. [24] 贺新卜, 张建良, 郭豪. 高炉喷吹煤冶金性能评价方法[J]. 钢铁研究, 2008(5):1. (HE Xin-bu, ZHANG Jian-liang, GUO Hao. Evaluating method on metallurgical properties of pulverized coal[J]. Research on Iron and Steel, 2008(5):1.) [25] 孔德文, 张建良, 林祥海, 等. 高炉喷吹混合煤的燃烧特性及动力学分析[J]. 钢铁研究学报, 2011, 23(11):4. (KONG De-wen, ZHANG Jian-liang, LIN Xiang-hai, et al. Combustion characteristics and kinetic analysis of blended coal in BF[J]. Journal of Iron and Steel Research, 2011, 23(11):4.) [26] 张华. 高炉喷吹混煤时碳与二氧化碳反应的探索[J]. 钢铁, 2011, 46(10):21. (ZHANG Hua. Explore on the reactivity of residual char with carbon dioxide of blast furnace blending coal injection[J]. Iron and Steel,2011, 46(10):21.) [27] LI X G, LÜ Y, MA B G, et al. Thermogravimetric investigation on co-combustion characteristics of tobacco residue and high-ash anthracite coal[J]. Bioresource Technology, 2011, 102(20):9783. [28] 覃开伟. 基于综合性能研究的高炉喷吹煤结构优化及指标提升[J]. 河北冶金, 2020(7): 52. (QIN Kai-wei. Structure of optimization and index improvement of coal injection in blast furnace based on comprehensive performance research[J]. Hebei Metallurgy, 2020(7):52.) [29] 左海滨,徐润生,张建良,等. 一种高炉喷吹煤性价比评价模型的建立方法: 中国, CN103952503A[P]. 2014-07-30.(ZUO Hai-bin, XU Run-sheng, ZHANG Jian-liang, et al. A Method for Establishing a Cost Performance Evaluation Model of Blast Furnace Coal Injection: China, CN103952503A[P]. 2014-07-30.) |
[1] |
ZHANG Fu-ming. Development prospects and methods on low- carbon technology in ironmaking system[J]. Iron and Steel, 2022, 57(9): 11-25. |
[2] |
GAO Jian-jun, ZHU Li, KE Jun-chao, HUO Xu-feng, QI Yuan-hong. Industrialized application of hydrogen-rich gas injection into blast furnace of Jinnan Steel[J]. Iron and Steel, 2022, 57(9): 42-48. |
[3] |
BAO Xiang-jun, WENG Si-hao, CHEN Guang, WANG Jing, CHEN Xu, XIE Jing-cheng. Comparison on multi-step prediction of blast furnace gas generation based on LSTM/SARIMA time series model[J]. Iron and Steel, 2022, 57(9): 166-172. |
[4] |
CHENG Xiangfeng1,ZHANG Fuming2,QING Gele1,XU Meng1,ZHANG Yan1. Research on main technical parameters of blast furnace with natural gas injection[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(9): 944-951. |
[5] |
GUO Jun, CHU Man-sheng, TANG Jue, LI Feng, LIU Zheng-gen, BAO Ji-wei. Exergy analysis of blast furnace using iron coke[J]. Iron and Steel, 2022, 57(8): 30-38. |
[6] |
LENG Chang-ming, JIANG Xin, XUE Qing-bin, LONG Fang, HUO Hong-yan, SHEN Feng-man. Effects of high proportion of acid burden on blast furnace operation and its countermeasures[J]. Iron and Steel, 2022, 57(7): 16-25. |
|
|
|
|