微钛固氮降低含铌钢皮下裂纹敏感性的机理

doi:10.13228/j.boyuan.issn0449-749x.20220103

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (6545 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Reducing the crack sensitivity of Nb containing low alloy steel slabs is a necessary condition of the advanced process of hot delivery and hot charging of steel slabs with lower fuel consumption and emission reduction. The grain size number and precipitate characteristics of Nb bearing low alloy steel slab with different titanium content were comparative studied by ultra-high temperature confocal laser scanning microscope (HT-CLSM) and transmission electron microscope (TEM),in order to reveal the mechanism of reducing the crack sensitivity of Nb containing low alloy steel by nitrogen fixation with titanium alloying. Thermodynamic calculations and TEM results of precipitates in Nb containing low alloy steel slabs show that increasing the titanium content (from 0.010% to 0.023%) enhances the precipitation temperature of titanium nitride particles (more than 1 400 ℃), which reduces the grain size of the steel by about 44% (from grade 4 to grade 6.5) by pinning the austenite grain boundaries, resulting in a significant reduction in the crack susceptibility of the high-temperature cast billets. The preferential precipitation titanium nitride particles can fixing nitrogen element to reduce the precipitation temperature of niobium-carbon nitride and aluminum nitride, and act as a heterogeneous nucleation core of nitride precipitates of niobium and aluminum to inhibit their precipitation at the grain boundary,which reduces the risk of grain boundary embrittlement of the Nb bearing low alloy steel. Modulation of nitride precipitate behavior by nitrogen fixation with titanium microalloying and grain refinement of the Nb bearing low alloy steel effectively reduced the width and depth of the third embrittlement temperature groove and increased the high temperature tensile strength by 21.3%-27.5% of niobium-containing steels, resulting in reduction of the incidence of subcutaneous cracking in cast billets by more than 80%. Controlling the titanium content in the range of 0.015% to 0.020% niobium-containing low-alloy steels can effectively avoid grain-boundary chain precipitation of precipitates leading to rolling cracks of hot charged cast billets.

Key words： low alloy steel containing Nb crack susceptibility of slab titanium nitride pinning effect regulation of precipitate behavior

Received: 14 February 2022

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHENG Wan
	KOU Jin-rong
	LI Lie-jun
	WANG Guan
	WAN Xiang
	LIU Chen-sheng

Cite this article:

ZHENG Wan,KOU Jin-rong,LI Lie-jun等. Mechanisem of reduction of subcutaneous cracking susceptibility in niobium-containing steel by nitrogen fixation with titanium microalloying[J]. Iron and Steel, 2022, 57(8): 94-102.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20220103 OR http://www.chinamet.cn/Jweb_gt/EN/Y2022/V57/I8/94

[1] 李霞,李春诚,佟铁印,等. 低合金高强钢HC340LA工艺优化生产实践[J]. 金属世界,2016(2):67.(LI Xia,LI Chun-cheng,TONG Tie-yin,et al. Production practice of process optimization of low-alloy high-strength steel HC340LA[J]. Metal World,2016(2):67.)
[2] 陈润农,李昭东,张明亚,等. 铌微合金化极低屈服点钢的组织与性能[J]. 钢铁,2019,54(1):63.(CHEN Run-nong,LI Zhao-dong,ZHANG Ming-ya,et al. Organization and properties of niobium microalloyed very low yield point steels[J]. Iron and Steel,2019,54(1):63.)
[3] 崔桂彬,鞠新华,张玉成,等. 含铌钢中铌的应变诱导析出行为[J]. 中国冶金,2019,29(3):15.(CUI Gui-bin,JU Xin-hua,ZHANG Yu-cheng,et al. Strain-induced precipitation behavior of niobium in niobium-containing steels[J]. China Metallurgy,2019,29(3):15.)
[4] 陈明昕,杨晓江,冯晓勇. Nb元素添加对75Cr1钢热变形行为的影响[J]. 中国冶金,2020,30(6):71.(CHEN Ming-xin,YANG Xiao-jiang,FENG Xiao-yong. Effect of Nb element addition on the thermal deformation behavior of 75Cr1 steel[J]. China Metallurgy,2020,30(6):71.)
[5] 吴巍,王春怀,干勇,等. 含铌、钛船板钢中板表面微裂纹研究[J]. 钢铁,2002,37(7):41.(WU Wei,WANG Chun-huai,GAN Yong,et al. Study of microcracks on the surface of plates in ship plate steel containing niobium and titanium[J]. Iron and Steel,2002,37(7):41.)
[6] 屈天鹏,王德永,徐周,等. 含Nb-Ti微合金钢连铸过程中TiN析出行为研究[J]. 连铸,2017,42(2):32.(QU Tian-peng,WANG De-yong,XU Zhou,et al. Study of TiN precipitation behavior during continuous casting of Nb-Ti-containing microalloyed steel[J]. Continuous Casting,2017,42(2):32.)
[7] 王学,李勇,王家庆,等. 高温时效对T23钢粗晶热影响区显微组织及再热裂纹敏感性的影响[J]. 金属学报,2021,57(6):736.(WANG Xue,LI Yong,WANG Jia-qing,et al. Effect of high temperature aging on microstructure and reheat crack susceptibility in the heat-affected zone of T23 steel coarse crystals[J]. Acta Metallurgica Sinica,2021,57(6):736.)
[8] 朱苗勇,蔡兆镇,宋景欣,等. 微合金品种钢连铸坯表面质量控制新技术及应用[Z]. 沈阳:东北大学,2013-12-15.(ZHU Miao-yong, CAI Zhao-zhen, SONG Jing-xin, et al. New Technology and Application of Surface Quality Control of Microalloyed Steel Continuous Casting Billet[Z]. Shenyang: Northeastern University,2013-12-15.)
[9] 杨柳,李阳,薛正良,等. 钛铌微合金钢连铸坯角部横裂纹敏感性[J]. 钢铁研究学报,2018,30(10):807.(YANG Liu,LI Yang,XUE Zheng-liang,et al. Transverse crack susceptibility at the corner of continuous casting billets of titanium-niobium microalloyed steel[J]. Journal of Iron and Steel Research,2018,30(10):807.)
[10] 杨晓伟,周云,陈焕德,等. 钛微合金化HRB400E钢筋组织性能及强化机理[J]. 中国冶金,2020,30(1):68.(YANG Xiao-wei,ZHOU Yun,CHEN Huan-de,et al. Organizational properties and strengthening mechanism of titanium microalloyed HRB400E steel bars[J]. China Metallurgy,2020,30(1):68.)
[11] 朱家明. 基于图像分析软件的晶粒尺寸分布统计[J]. 压电与声光,2013,35(4):585.(ZHU Jia-ming. Grain size distribution statistics based on image analysis software[J]. Piezoelectricity and Acoustics,2013,35(4):585.)
[12] 何倩,刘华松,刘珂,等. 热装工艺对含铌微合金钢铸坯再加热奥氏体晶粒细化影响[J]. 连铸,2018,43(4):5.(HE Qian,LIU Hua-song,LIU Ke,et al. Effect of heat loading process on austenite grain refinement of reheated cast billets containing niobium microalloy steel[J]. Continuous Casting,2018,43(4):5.)
[13] 薛润东,赵志毅,谢建新,等. 加热温度对钛铌微合金钢中未溶颗粒形貌和成分的影响[J]. 钢铁研究学报,2007,19(4):80.(XUE Run-dong,ZHAO Zhi-yi,XIE Jian-xin,et al. Effect of heating temperature on the morphology and composition of insoluble particles in titanium-niobium microalloyed steel[J]. Journal of Iron and Steel Research,2007,19(4):80.)
[14] Mintz B,Cowley A,Abushosha R. Importance of columnar grains in dictating hot ductility of steels[J]. Materials Science and Technology,2000,16(1):1.
[15] 卢欣欣,孙彦辉,白雪松,等. 合金元素Nb对螺纹钢组织和性能的影响[J]. 工业加热,2021,50(4):20.(LU Xin-xin,SUN Yan-hui,BAI Xue-song, et al. Effect of alloying element Nb on the organization and properties of rebar[J]. Industrial Heating,2021,50(4):20.)
[16] 吴石新,陈登福,汪勤政,等. 钛微合金钢连铸中TiN与TiC析出热力学研究[J]. 连铸,2019,44(1):8.(WU Shi-xin,CHEN Deng-fu,WANG Qin-zheng,et al. Thermodynamic study of TiN and TiC precipitation in continuous casting of titanium microalloyed steel[J]. Continuous Casting,2019,44(1):8.)
[17] 雍岐龙,刘正东,孙新军,等. 钛微合金钢中碳氮化钛固溶量及化学组成的计算与分析[J]. 钢铁钒钛,2005,26(3):12.(YONG Qi-long,LIU Zheng-dong,SUN Xin-jun,et al. Calculation and analysis of the solid solution amount and chemical composition of titanium carbon nitride in titanium microalloy steel[J]. Steel Vanadium and Titanium,2005,26(3):12.)
[18] 杨颖,侯华兴,史乃安,等高钛低碳钢中Nb、Ti的析出行为[J]. 热加工工艺,2010,39(2):40.(YANG Ying,HOU Hua-xing,SHI Nai-an,et al. Precipitation behavior of Nb and Ti in high titanium low carbon steels[J]. Thermal Processing Technology,2010,39(2):40.)
[19] XU Bo,LI Lie-jun,ZHENG Wang,et al. Study on high temperature plasticity of Q390 microalloyed steel[J]. Journal of Physics:Conference Series,2021,2044(1):1.
[20] 李云峰. 微合金钢连铸坯表层原始奥氏体晶粒的细化研究[D]. 重庆:重庆大学,2014.(LI Yun-feng. Refinement of Pristine Austenite Grains in the Surface Layer of Microalloyed Steel Continuous Casting Billets[D]. Chongqing:Chongqing University,2014.)
[21] 雍岐龙. 钢铁材料中的第二相[M]. 北京:冶金工业出版社,2006.(YONG Qi-long. Secondary Phases in Steels[M]. Beijing:Metallurgical Industry Press,2006.)