UCM轧机工作辊辊形设计及应用

doi:10.13228/j.boyuan.issn0449-749x.20220087

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3209 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract When UCM mill uses conventional chamfering work roll to produce silicon steel,the strip steel has the problem of edge tension and belt breaking,which affects the production efficiency. To solve this problem,the roll profile EDC anti breaking belt is designed independently. It reduces the change rate of edge chamfer through reverse arc design and homogenizes the strip steel edge stress. It can improve the production stability on the premise of ensuring that the mill edge drop control level is not reduced. The EDC roll profile curve is symmetrically distributed on both sides,including the middle flat roll zone,anti break belt control zone and deviation control zone. Because UCM mill does not have the function of work roll shifting,this paper divides multiple width sections according to the distribution law of product width. It designs multiple sets of roll profiles to adapt to the rolling of different width sections. The three-dimensional elastic-plastic finite element model of strip rolling is established by numerical simulation technology,and the strip edge stress and edge drop control effect of EDC roll profile and conventional chamfering work roll are compared. The simulation data show that strip edge stress of EDC work roll profile is reduced. Under the same roll bending force,the improvement effect of EDC roll profile on edge drop is more obvious. Under the condition of zero bending force,the edge drop of conventional chamfering work roll is 15 μm. The edge drop of EDC roll profile is 8 μm. The effect of edge drop control is better than conventional chamfering work roll. The roll profile parameters are written into Python software to realize the efficient and automatic solution of curve parameters. It can adjust the roll profile parameters according to the on-site roll use and product edge drop requirements,and has a certain flexibility. The EDC roll profile curve is applied to the commissioning of a 1 420 UCM coupled mill. The on-site shape is normal and the production is stable. The proportion of width thickness difference ≤7 μm is increased from 32% to 56%,with an increase of 75%. The effect is significantly improved. The belt breaking rate of the mill is controlled from 0.1% to less than 0.02%.

Key words： UCM-mill roll profile optimization curve design Python computing numerical simulation field application

Received: 08 February 2022

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Jian-lei
	CHEN Wei
	LU Jia-dong
	YUE Chong-xiang

Cite this article:

ZHANG Jian-lei,CHEN Wei,LU Jia-dong等. Design and application of work roll profile on UCM-mill[J]. Iron and Steel, 2022, 57(8): 123-131.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20220087 OR http://www.chinamet.cn/Jweb_gt/EN/Y2022/V57/I8/123

[1] 刘曙光,杨晓江,兰艳梅,等. 无取向硅钢的冶炼与生产实践[J]. 金属世界,2009(3):27.(LIU Shu-guang,YANG Xiao-jiang,LAN Yan-mei,et al. Practice of producing non-oriented silicon steel[J].Metal World,2009(3):27.)
[2] Huang B Y,Yamamoto K,Kaido C,et al. Effect of cold-rolling on magnetic properties of non-oriented silicon steel sheets (Part II)[J]. Journal of Magnetism and Magnetic Materials,2000,209(1/2/3):197.
[3] 夏彬,韩松,张楠,等. 硅钢的研究现状及发展趋势[J]. 中国冶金,2018,28(6):9.(XIA Bin,HAN Song,ZHANG Nan,et al. Research status and development trend of silicon steel[J]. China Metallurgy,2018,28(6):9.)
[4] SHA Y H,ZHANG F,ZHOU S C,et al. Improvement of recrystallization texture and magnetic property in non-oriented silicon steel by asymmetric rolling[J]. Journal of Magnetism and Magnetic Materials,2008,320(3/4):393.
[5] ZHANG Z G,LIU Y D,WANG F. Effect of annealing time on recrystallization texture and magnetic property of non-oriented silicon steel under asynchronous rolling[J]. Transactions of Materials and Heat Treatment,2010,31(3):69.
[6] 李兆振,宋新莉,刘静,等. 铬、锰及退火温度对无取向硅钢组织性能影响[J]. 钢铁,2020,55(5):80.(LI Zhao-zhen,SONG Xin-li,LIU Jing,et al. Effect of Cr,Mn and annealing temperature on properties of non-oriented silicon steel[J]. Iron and Steel,2020,55(5):80.)
[7] 陈卓,杨林. 民营企业电工钢生产高质量发展的思考[J]. 中国冶金,2020,30(8):1.(CHEN Zhuo,YANG Lin. Thoughts on high-quality development of electrical steel production in private enterprises[J]. China Metallurgy,2020,30(8):1.)
[8] 薛利强,潘振东,吕令涛,等. 超高牌号无取向硅钢降钛工艺研究及改进[J]. 中国冶金,2020,30(10):60.(XUE Li-qiang,PAN Zhen-dong,LÜ Ling-tao,et al. Research and improvement of technology to reduce Ti content in super-high grade non-oriented electrical steel[J]. China Metallurgy,2020,30(10):60.)
[9] 潘妮,戴方钦. 无取向硅钢连续退火机组预热/无氧化炉热工特性的段法模型[J]. 冶金能源,2015,34(2):20.(PAN Ni,DAI Fang-qin. Zone modelling of the thermal of PH/NOF of the continuous annealing furnace for non-oriented silicon steel[J]. Energy for Metallurgical Industry,2015,34(2):20.)
[10] 董强,张建水. 无取向电工钢热轧楔形问题分析与控制[J]. 中国冶金,2020,30(4):64.(DONG Qiang,ZHANG Jian-shui. Analysis and control of strip wedge of non-orientation electrical steel in hot rolling process[J]. China Metallurgy,2020,30(4):64.)
[11] 刘青松,裴英豪,施立发,等. 退火张力对Fe-3.0%Si无取向硅钢磁各向异性的影响[J]. 钢铁,2020,55(4):95.(LIU Qing-song,PEI Ying-hao,SHI Li-fa,et al. Effect of annealing tension on magnetic anisotropy of Fe-3.0%Si non-oriented silicon steel[J]. Iron and Steel,2020,55(4):95.)
[12] 胡强,王晓晨,杨荃. 六辊冷连轧机边降自动控制系统设计及应用[J]. 冶金自动化,2016,40(1):34.(HU Qiang,WANG Xiao-chen,YANG Quan. Design and application of automatic edge drop control system for 6-high tandem cold rolling mill[J]. Metallurgical Industry Automation,2016,40(1):34.)
[13] YANG G H,ZHANG J,LI H B,et al. Taper roll contour design for edge drop control of non-oriented electrical steel on tandem cold rolling mill[J]. Applied Mechanics and Materials,2012,166-169:670.
[14] LU Hai-tao,CAO Jian-guo,ZHANG Jie,et al. Edge drop control of a taper roll during continuous cold rolling[J]. Journal of University of Science and Technology Beijing,2006,28(8):774.
[15] 李广林,陈凌峰,张广治,等. 冷轧硅钢板形与横向厚度控制的分析[J]. 中国冶金,2015,25(4):24.(LI Guang-lin,CHEN Ling-feng,ZHANG Guang-zhi,et al. Analysis of the shape and transverse thickness control of cold-rolled silicon steel[J]. China Metallurgy,2015,25(4):24.)
[16] 何安瑞,邵健,孙文权,等. 冷轧无取向硅钢横向厚差控制[J]. 机械工程学报,2011,47(10):6.(HE An-rui,SHAO Jian,SUN Wen-quan,et al. Transverse thickness deviation control of non-oriented silicon steel during cold rolling[J]. Journal of Mechanical Engineering,2011,47(10):6.)
[17] 熊文涛,郭德福,丁美良,等. 冷轧无取向硅钢横向厚度差控制技术[J]. 钢铁,2016,51(1):65.(XIONG Wen-tao,GUO De-fu,DING Mei-liang,et al. Technology of the transverse thickness difference control for cold rolled non-oriented silicon steel[J]. Iron and Steel,2016,51(1):65.)
[18] 沈新玉,胡柯,李宏洲,等. UCM冷连轧机边降控制工作辊辊形优化[J]. 中国冶金,2019,29(11):55.(SHEN Xin-yu,HU Ke,LI Hong-zhou,et al. Work roll contour optimization for edge drop control based on UCM cold rolling mills[J]. China Metallurgy,2019,29(11):55.)
[19] 白振华,刘亚星,冯彬,等. 六辊轧机轧辊锥度对板形的影响及其补偿技术研究[J]. 燕山大学学报,2015,39(1):9.(BAI Zhen-hua,LIU Ya-xing,FENG Bin,et al. Study on the influence of six high mill roll taper on strip shape and its compensation technology[J]. Journal of Yanshan University,2015,39(1):9.)
[20] Furuya N I. New design 6-h cold mill (HC mill) solves shape problems[J]. Iron and Steel Engineer,1979,56(8):40.
[21] 李光辉. 冷轧无取向硅钢同板差控制的EVC-Plus技术[J]. 钢铁,2018,53(8):68.(LI Guang-hui. EVC-plus technique of transverse thickness deviation control of non-oriented silicon steel during cold rolling[J]. Iron and Steel,2018,53(8):68.)
[22] 胡柯,沈新玉,曲义振,等. 六辊UCM可逆冷轧机带钢断面形状精细控制技术[J]. 钢铁,2018,53(12):69.(HU Ke,SHEN Xin-yu,QU Yi-zhen,et al. Fine control technology of strip profile for 6-high reversible universal crown cold rolling mill[J]. Iron and Steel,2018,53(12):69.)
[23] 董志奎,戚向东,鞠伟,等. UCM冷连轧机辊型曲线优化设计[J]. 机械设计,2010,27(12):70.(DONG Zhi-kui,QI Xiang-dong,JÜ Wei, t al. Optimization design of roller shape for UCM tandem cold mills[J]. Journal of Machine Design,2010,27(12):70.)
[24] 令狐克志,宋浩源,王永强,等. 六辊CVC冷轧机凸度控制能力分析及应用[J]. 钢铁,2014,49(11):53.(LINGHU Ke-zhi,SONG Hao-yuan,WANG Yong-qiang,et al. Analysis and application of crown control of 6-hign CVC cold rolling mill[J]. Iron and Steel,2014,49(11):53.)