晋南钢铁高炉喷吹富氢气体工业化实践

doi:10.13228/j.boyuan.issn0449-749x.20220075

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2687 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Iron and steel industry is one of the largest industrial carbon dioxide producers in China, accounting for about 15% of the total carbon dioxide emission. Blast furnace is the dominate carbon consumer, accounting for more than 70% of the total carbon consumption in the iron and steel making process. Lowering the carbon consumption of blast furnace is the most effective measure to reduce the carbon dioxide emission of iron and steel industry. Injecting hydrogen-rich gas into blast furnace can not only improve productivity and reduce pollutant emission, but also decrease coke or pulverized coal consumption, resulting in less carbon consumption in blast furnace at its source and less carbon dioxide emissions. Taking the industrial test data of hydrogen-rich gas injection into two 1 860 m³ blast furnaces of Shanxi Jinnan Steel Group as an example, the effects of hydrogen-rich gas injection into blast furnaces on fuel ratio, theoretical tuyere combustion temperature, bosh gas volume, H₂ utilization rate and CO₂ emission were studied. The results show that injecting hydrogen-rich gas can significantly reduce the consumption of solid fuel in blast furnace. When the injection volume of hydrogen-rich gas per ton of hot metal is 65 m³, the replacement ratio of hydrogen-rich gas to solid fuel is 0.49 kg/m³. The injection of hydrogen-rich gas into the tuyere lowers the theoretical tuyere combustion temperature by about 1.5 ℃ for each injection of 1 m³ hydrogen rich gas, and the blast volume and bosh gas volume of blast furnace decrease slightly. After injecting hydrogen-rich gas, the average utilization rate of H₂is 37.3%, the average utilization rate of CO is 43.2%. When the injection volume of hydrogen-rich gas per ton of produced hot metal is 65 m³, CO₂ emission per ton of produced hot metal can be reduced by about 80 kg, and CO₂ emission of blast furnace can be decreased by 5.6%, achieving good economic, environmental and carbon reduction results.

Key words： blast furnace hydrogen-rich gas replacement ratio H₂ utilization rate CO₂ emission

Received: 27 January 2022

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Jian-jun
	ZHU Li
	KE Jun-chao
	HUO Xu-feng
	QI Yuan-hong

Cite this article:

GAO Jian-jun,ZHU Li,KE Jun-chao等. Industrialized application of hydrogen-rich gas injection into blast furnace of Jinnan Steel[J]. Iron and Steel, 2022, 57(9): 42-48.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20220075 OR http://www.chinamet.cn/Jweb_gt/EN/Y2022/V57/I9/42

[1] 张琦, 沈佳林, 许立松. 中国钢铁工业碳达峰及低碳转型路径[J]. 钢铁, 2021, 56(10):152.(ZHANG Qi, SHEN Jia-lin, XU Li-song. Carbon peak and low-carbon transition path of China's iron and steel industry[J]. Iron and Steel, 2021, 56(10):152.)
[2] 田伟健,李辉,全魁,等.长流程钢铁企业的碳代谢模型与碳排放分析[J].冶金能源,2020,39(1):3.(TIAN Wei-jian,LI Hui,QUAN Kui,et al. Carbon metabolism model and carbon emission analysis of the integrated iron and steel enterprises[J].Energy for Metallurgical Industry,2020,39(1):3.)
[3] 上官方钦, 周继程, 王海风, 等. 气候变化与钢铁工业脱碳化发展[J]. 钢铁, 2021, 56(5):1.(SHANGGUAN Fang-qin, ZHOU Ji-cheng, WANG Hai-feng, et al. Climate change and decarbonization development of steel industry[J]. Iron and Steel, 2021, 56(5):1.)
[4] 龚奂彰, 黄秀玉. 钢铁行业碳减排技术应用于展望[J]. 中国冶金, 2021, 31(9):53.(GONG Huan-zhang, HUANG Xiu-yu. Application and prospect of carbon emission reduction technology in iron and steel industry[J]. China Metallurgy, 2021, 31(9):53.)
[5] 张利娜,李新创,李冰,等.基于钢铁企业的技术碳减排成本计算方法研究及应用[J].冶金能源,2020,39(4):3.(ZHANG Li-na,LI Xin-chuang,LI Bing,et al. Research and application on calculation method of technical carbon emission reduction cost of iron and steel enterprises[J].Energy for Metallurgical Industry,2020,39(4):3.)
[6] 高建军, 齐渊洪, 严定鎏, 等. 中国低碳炼铁技术的发展路径与关键技术问题[J]. 中国冶金, 2021, 31(9):64.(GAO Jian-jun, QI Yuan-hong, YAN Ding-liu, et al. Development path and key technical problems of low carbon ironmaking in China[J]. China Metallurgy, 2021, 31(9):64.)
[7] Gudenau H W, Senk D, Babich A, et al. Sustainable development in iron and steel research, CO₂ and wastes[J]. ISIJ International,2004,44(9):1469.
[8] Ariyama T, Sato M. Optimization of ironmaking process for reducing CO₂ emissions in the integrated steel works[J]. ISIJ International,2006,46(12):1736.
[9] Murai R, Sato M, Ariyama T. Design of innovative blast furnace for minimizing CO₂ emission based on optimization of solid fuel injection and top gas recycling[J]. ISIJ International,2004,44(12):2168.
[10] 周亮, 刘克明, 沙永志. 高炉喷出焦炉煤气置换比的计算[J]. 钢铁研究学报, 2013, 25(5):19.(ZHOU Liang, LIU Ke-ming, SHA Yong-zhi. Calculation of replacement ratio of injecting coke oven gas into blast furnace[J]. Journal of Iron and Steel Research, 2013, 25(5):19.)
[11] 王磊, 郭培民, 孔令兵, 等. 高炉风口喷吹焦炉煤气的减排能力分析[J]. 烧结球团, 2021, 46(4):78.(WANG Lei, GUO Pei-min, KONG Ling-bing, et al. Analysis on carbon emission reduction ability of blast furnace tuyere with COG injection[J]. Sintering and Pelletizing, 2021, 46(4):78.)
[12] 饶润昌, 毕学工, 田志兵, 等. 高炉喷吹焦炉煤气降焦效果的数值分析[J]. 炼铁, 2011, 30(4):52.(RAO Run-chang, BI Xue-gong, TIAN Zhi-bing, et al. Numerical analysis of coke reduction effect of coke oven gas injection into blast furnace[J]. Ironmaking, 2011, 30(4):52.)
[13] 毕传光, 唐珏, 储满生. 梅钢2号高炉喷吹焦炉煤气数值模拟[J]. 钢铁, 2018, 53(4):89.(BI Chuan-guang, TANG Jue, CHU Man-sheng. Mathematical modeling of Mei Steel No.2 BF with coke oven gas injection[J]. Iron and Steel, 2018, 53(4):89.)
[14] 高建军, 郭培民. 高炉富氧喷吹焦炉煤气对CO₂减排规律研究[J]. 钢铁钒钛, 2010,31(3):1.(GAO Jian-jun, GUO Pei-min. Numerical simulation of injection of coke oven gas with oxygen enrichment to the blast furnace[J]. Iron Steel Vanadium Titanium, 2010,31(3):1)
[15] 高建军, 郭培民, 齐渊洪, 等. 工艺参数对氧气高炉能耗的影响规律[J]. 钢铁研究学报, 2011,23(7):14.(GAO Jian-jun, GUO Pei-min, QI Yuan-hong, et al. Effect of process parameters on energy consumption of the oxygen blast furnace[J]. Journal of Iron and Steel Research, 2011,23(7):14.)
[16] 齐渊洪, 严定鎏, 高建军, 等. 氧气高炉工业化试验研究[J]. 钢铁, 2011,46(3):6.(QI Yuan-hong, YAN Ding-liu, GAO Jian-jun, et al. Study on industrial test of the oxygen blast furnace[J]. Iron and Steel, 2011,46(3):6.)
[17] 朱国海.高炉富氢还原研究[J].钢铁, 2020, 55(10):1.(ZHU Guo-hai. A review on hydrogen-enriched reduction in blast furnace[J]. Iron and Steel, 2020, 55(10):1.)
[18] 周恒, 徐坤, 姚舜, 等. 高炉喷吹COREX脱CO₂顶煤气的数值分析[J]. 钢铁, 2021, 56(2):57.(ZHOU Heng, XU Kun, YAO Shun, et al. Numerical simulation of injection of COREX decarbonized top gas to blast furnace[J]. Iron and Steel, 2021, 56(2):57.)
[19] 王月秋, 赵冬云, 刘颖. 鞍钢鲅鱼圈高炉喷吹焦炉煤气技术[C]//第九届中国钢铁年会论文集.北京:中国金属学会, 2013:1.(WANG Yue-qiu, ZHAO Dong-yun, LIU Ying. Technology of injecting coke oven gas into blast furnace of Bayuquan, Ansteel[C]//Proceedings of the 9th China Iron and Steel Annual Conference. Beijing:The Chinese Society for Metals,2013:1.)
[20] 刘学燕, 毛雪芹, 薄涛, 等. 济钢4号高炉喷吹焦炉煤气工业试验[J]. 炼铁, 2019, 38(2):39.(LIU Xue-yan, MAO Xue-qing, BO Tao, et al. Industrial test of injecting coke oven gas into No.4 blast furnace of Jinan Steel[J]. Ironmaking, 2019, 38(2):39.)