|
|
Microstructures and mechanical properties of laser tailor- welded dissimilar super-high strength steel sheets |
WANG Jin-feng, YUAN Yao, LI Cong |
School of Materials Science and Engineering, Hubei University of Automotive Technology, Shiyan 442002, Hubei, China |
|
|
Abstract Automotive safety and crash energy absorption have increased the demand for higher strength,energy-absorbing materials and their joining technology. Laser tailor-welded of DP980 dual phase steel and 22MnB5 hot-forming steel is used to investigate the effect of welding heat input on the microstructure and mechanical properties. By keeping the laser output power constant(1.3 kW) and varying the welding speed to control the welding heat input,the relationship between the welding heat input and the microstructure and mechanical properties of the tailor-welded joints was investigated. The microstructure and properties of the different sub-regions of the joint were examined using optical microscopy(OM),scanning electron microscopy(SEM),micro-hardness tester and tensile test machine. The results show that when the welding speed varies between 16 and 26 mm/s,a complete and defect-free fusion zone is obtained; as the welding speed increases,not only does the weld surface depression gradually improve,and the width of the weld heat affected zone(HAZ) also decreases. Hardness tests indicated the presence of softened zones in the joint,mainly in the tempered zone and incomplete phase transformation region of the heat affected zone on the DP980 side,while the fine grain zone, coarse grain zone,heat affected zone of 22MnB5 and weld metal zone of DP980 together formed the hardened area of the joint. Furthermore,the tensile strength of the welded joints remained between 576 and 597 MPa,with the corresponding fractures occurring in the base metal zone of 22MnB5 and accompanied by significant necking. The post-break elongation of the joints ranged from 11.9% to 15.5% between the post-break elongation of the DP980(11%) and the 22MnB5(22%). The study also showed that the greater the heat input during welding,the coarser the microstructure of the same area of the joint.
|
Received: 04 March 2022
|
|
|
|
[1] 向晓峰,魏丽霞,马鸣图. 汽车轻量化技术的应用[J]. 汽车工程师,2012(5):57.(XIANG Xiao-feng,WEI Li-xia,MA Ming-tu. The application of automotive lightweight technology[J]. Auto Engineer,2012(5):57.) [2] 康永林,朱国明. 中国汽车发展趋势及汽车用钢面临的机遇与挑战[J]. 钢铁,2014,49(12):1.(KANG Yong-lin,ZHU Guo-ming. Development trend of China's automobile industry and the opportunities and challenges of steels for automobile[J]. Iron and Steel,2014,49(12):1.) [3] 王传青. 白车身前端结构-材料-性能一体化轻量化多目标协同优化设计[D]. 长春:吉林大学,2016.(WANG Chuan-qing. Structure-Material-Performance Integration Lightweight Multi-objective Collaborative Optimization Design for Front Structure of BIW[D].Changchun:Jilin University,2016.) [4] XIONG Feng,WANG Deng-feng,MA Zheng-dong,et al. Structure-material integrated multi-objective lightweight design of the front end structure of automobile body[J]. Structural and Multidisciplinary Optimization,2018,57(2):829. [5] 吴张炜,金炀. 汽车轻量化及其低密度钢板研究现状[J]. 山东冶金,2019,41(3):26.(WU Zhang-wei,JIN Yang. Automobile lightweight and the research status of low density steel sheet[J]. Shandong Metallurgy,2019,41(3):26.) [6] 王存宇,杨洁,常颖,等. 先进高强度汽车钢的发展趋势与挑战[J]. 钢铁,2019,54(2):1.(WANG Cun-yu,YANG Jie,CHANG Ying,et al. Development trend and challenge of advanced high strength automobile steels[J]. Iron and Steel,2019,54(2):1.) [7] Nanda Tarun,Singh Vishal,Singh Gurpreet,et al. Processing routes,resulting microstructures,and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications[J]. Archives of Civil and Mechanical Engineering,2021,21(1):7. [8] Khan M Shehryar,Razmpoosh M H,Macan A,et al. Corrigendum to "Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite"[J]. Journal of Materials Processing Tech,2021,297(11):117093. [9] 赵海峰,徐德超,张博明,等. 1 800 MPa级微合金化热冲压钢的弯曲性能[J]. 中国冶金,2021,31(11):21.(ZHAO Hai-feng,XU De-chao,ZHANG Bo-ming,et al. Bending properties of 1 800 MPa grade microalloyed hot stamping steel[J]. China Metallurgy,2021,31(11):21.) [10] 李涛,李芳,王诗恩,等. 车用镀锌钢板光纤激光拼焊工艺研究[J]. 激光与光电子学进展,2015,52(1):011406.(LI Tao,LI Fang,WANG Shi-en,et al. Research on car galvanized tailor-welded blanks of fiber laser welding[J]. Laser and Optoelectronics Progress,2015,52(1):011406.) [11] World Auto Steel. Advanced high strength steel(AHSS)—Application Guidelines(vesion4)[EB].International Iron and Steel Institute Committee on Automotive Appcications,2014. https://www.worldautosteel.org/. [12] Smith,Vanessa M,David L Gard,et al. Ultra light steel auto body advanced vehicle concepts (ULSAB-AVC) life cycle inventory study[EB]. Internal Report to International Iron and Steel Institute. University of Michigan,Ann Arbor,2002. https://www.worldautosteel.org/. [13] 姜超,单忠德,庄百亮,等. 热冲压成形22MnB5钢板的组织和性能[J]. 材料热处理学报,2012,33(3):78.(JIANG Chao,SHAN Zhong-de,ZHUANG Bai-liang,et al. Microstructure and properties of hot stamping 22MnB5 steel[J]. Transactions of Materials and Heat Treatment,2012,33(3):78.) [14] 章骏,薛甬申,桂龙明,等. 22MnB5 钢相变特性和热成形工艺研究[J]. 上海金属,2015,37(4):11.(ZHANG Jun,XUE Yong-shen,GUI Long-ming,et al. Study on transformation characteristics of 22MnB5 steel and its hot stamping[J]. Shanghai Metals,2015,37(4):11.) [15] 邵天巍,薛俊良,万占东,等. QP980-DP980异种先进高强钢激光焊接头微观组织及力学性能[J]. 焊接,2019(7):5.(SHAO Tian-wei,XUE Jun-liang,WAN Zhan-dong,et al. Microstructure and mechanical properties of laser welded joint of dissimilar advanced high strength steels QP980-DP980[J]. Welding and Joining,2019(7):5.) [16] Panda S K,Baltazar Hernandez V H,Kuntz M L,et al. Formability analysis of diode-laser-welded tailored blanks of advanced high-strength steel sheets[J]. Metallurgical and Materials Transactions A,2009,40:1955. [17] 沈钦龙,姜超,顿亚鹏,等.22MnB5超高强钢光纤激光搭接接头组织及性能研究[J].热加工工艺,2018,47(12):56.(SHEN Qin-long,JIANG Chao,DUN Ya-peng,et al. Research on microstructure and mechanical properties of fiber laser lap welded joints of 22MnB5 ultra-high strength[J]. Hot Working Technology,2018,47(15):56.) [18] Shah U H,Liu X. Ultrasonic resistance welding of TRIP-780 steel[J]. Journal of Materials Processing Tech,2019,274:116287. [19] Braga V,Siqueira R H M,Carvalho S M,et al. Mechanical behavior and microstructure of a fiber laser-welded TWIP steel[J].The International Journal of Dvanced Manufacturing Technology,2019,104:1245. [20] GUO Wei,WAN Zhan-dong,JIA Qiang,et al. Laser weld ability of TWIP980 with DP980/B1500HS/QP980 steels:Microstructure and mechanical properties[J]. Optics and Laser Technology,2020,124:105961. [21] Sha D C,Westerbaan D,Nayak S S,et al. Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels[J]. Materials Science and Engineering:A,2014,607:445. [22] 彭聪,高向东,刘桂谦,等. 激光功率对高强钢DP780-铝合金5052异种材料焊接的影响[J]. 机床与液压,2021,49(7):22.(PENG Cong,GAO Xiang-dong,LIU Gui-qian,et al. Effect of laser power on laser welding of steel-aluminum dissimilar metals[J]. Machine Tool and Hyraulics,2021,49(7):22.) [23] 高树灵. DP780/DP980异种高强钢激光焊接工艺及焊接接头组织性能研究[D]. 天津:天津理工大学,2018.(GAO Shu-ling. Study on Microstructure and Properties of Laser-welded DP780/DP980 Dissimilar High-strength Steel Joints[D].Tianjin:Tianjin University of Technology,2018.) [24] 夏丁,邸曙升,潘林,等. 基于侧碰耐撞性的B柱轻量化设计[J]. 汽车工程,2021,43(2):248.(XIA Ding,DI Shu-sheng,PAN Lin,et al. B-pillar lightweight design for side impact crash worthiness[J]. Automotive Engineering,2021,43(2):248.) [25] 杨立军,孙明升,王金凤,等. DP980超高强钢激光焊接接头组织及性能研究[J]. 天津大学学报(自然科学与工程技术版),2017(3):290.(YANG Li-jun,SUN Ming-sheng,WANG Jin-feng,et al. Microstructure and properties of laser welding ultra-high strength steel DP980 Joints[J]. Journal of Tianjin University(Science and Technology),2017(3):290.) [26] 王金凤,房宇,李兵,等. DP980与22MnB5激光拼焊接头性能研究[J]. 激光与光电子学进展,2018(55):021410.(WANG Jin-feng,FANG Yu,LI Bing,et al. Properties of laser tailor-welded joints of DP980 and 22MnB5[J]. Laser and Optoelectronics Progress,2018(55):021410.) |
[1] |
LI Hua-ying, LIU Guo-xiang, SONG Yao-hui, ZHAO Hai-quan, LI Juan, TIAN Ying-hao. Hot deformation behavior of antibacterial stainless steel containing 4.35% copper[J]. Iron and Steel, 2022, 57(9): 123-129. |
[2] |
QIU Guoxing,WEI Xuli,MIAO Dejun,BAI Chong,HE Yun,LI Xiaoming. Research progress of nuclear FeCrAl cladding materials[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(9): 884-894. |
[3] |
REN Lei1,2,CAO Jianqiang3,ZHANG Hainan1,2,YANG Jichun1,2,FU Xiaoyang1,2,ZHANG Fang1,2. Effect of Ce content on mechanical properties of U75V steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(9): 999-1008. |
[4] |
DONG Jianxiong, GU Huazhi, HUANG Ao, XUE Zhengliang. Corrosion behavior of highalumina and lowsilicon CaOAl2O3 slags on corundum/calcium hexaaluminate based castables[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(8): 825-833. |
[5] |
ZHOU Mengsha1, LIU Xing2, CHEN Wei3, CAO Jianchun2, YIN Shubiao1, ZHANG Yongqing4. Effect of N content on microstructure and properties of Nb microalloyed HRB400E rebar[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(8): 848-858. |
[6] |
FAN Lei1,XIAO Juan1,LI Xian1,YANG Yuebiao1,TIAN Junyu2,XU Guang2. Effect of strain rate on high temperature mechanical properties of Q460 continuous cast slab[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(8): 859-867. |
|
|
|
|